- Nov 16, 2021
-
-
Ming Lei authored
For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_wdt mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_debug] Reported-by:
ChanghuiZhong <czhong@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211116014343.610501-1-ming.lei@redhat.com Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- Nov 10, 2021
-
-
Luis Chamberlain authored
Now that we have done a spring cleaning on all drivers and added error checking / handling, let's keep it that way and ensure no new drivers fail to stick with it. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20211110002949.999380-1-mcgrof@kernel.org Signed-off-by:
-
- Nov 05, 2021
-
-
Luis Chamberlain authored
Commit 83cbce95 ("block: add error handling for device_add_disk / add_disk") added error handling to device_add_disk(), however the goto label for the kobject_create_and_add() failure did not set the return value correctly, and so we can end up in a situation where kobject_create_and_add() fails but we report success. Fixes: 83cbce95 ("block: add error handling for device_add_disk / add_disk") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- Nov 04, 2021
-
-
Luis Chamberlain authored
__register_blkdev() is used to register a probe callback, and that callback is typically used to call add_disk(). Now that we are able to capture errors for add_disk(), we need to fix those probe calls where add_disk() fails and clean up resources. We don't extend the probe call to return the error given: 1) we'd have to always special-case the case where the disk was already present, as otherwise concurrent requests to open an existing block device would fail, and this would be a userspace visible change 2) the error from ilookup() on blkdev_get_no_open() is sufficient 3) The only thing the probe call is used for is to support pre-devtmpfs, pre-udev semantics that want to create disks when their pre-created device node is accessed, and so we don't care for failures on probe there. Expand documentation for the probe callback to ensure users cleanup resources if add_disk() is used and to clarify this interface may be removed in the future. Reviewed-by:
-
- Oct 26, 2021
-
-
Ming Lei authored
Before removing disk from sysfs, userspace still may change queue via sysfs, such as switching elevator or setting wbt latency, both may reinitialize wbt, then the warning in blk_free_queue_stats() will be triggered since rq_qos_exit() is moved to del_gendisk(). Fixes the issue by moving draining queue & tearing down after disk is removed from sysfs, at that time no one can come into queue's store()/show(). Reported-by:
Yi Zhang <yi.zhang@redhat.com> Tested-by:
-
- Oct 21, 2021
-
-
Xie Yongji authored
To hide internal implementation and simplify some driver code, this adds a helper to invalidate the gendisk. It will clean the gendisk's associated buffer/page caches and reset its internal states. Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Reviewed-by:
-
- Oct 19, 2021
-
-
Jens Axboe authored
This is called for every write in the fast path, move it inline next to get_disk_ro() which is called internally. Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
- Oct 18, 2021
-
-
Jens Axboe authored
Reading the inode size brings in a new cacheline for IO submit, and it's in the hot path being checked for every single IO. When doing millions of IOs per core per second, this is noticeable overhead. Cache the nr_sectors in the bdev itself. Reviewed-by:
-
Pavel Begunkov authored
Convert bdev->bd_disk->queue to bdev_get_queue(), it's uses a cached queue pointer and so is faster. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/addf6ea988c04213697ba3684c853e4ed7642a39.1634219547.git.asml.silence@gmail.com Signed-off-by:
-
Pavel Begunkov authored
There are tons of places where we need to get a request_queue only having bdev, which turns into bdev->bd_disk->queue. There are probably a hundred of such places considering inline helpers, and enough of them are in hot paths. Cache queue pointer in struct block_device and make use of it in bdev_get_queue(). Signed-off-by:
-
Christoph Hellwig authored
Drop various include not actually used in genhd.h itself, and move the remaning includes closer together. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de Signed-off-by:
-
- Oct 17, 2021
-
-
Christoph Hellwig authored
Warn when the last reference on a live disk is put without calling del_gendisk first. There are some BDI related bug reports that look like a case of this, so make sure we have the proper instrumentation to catch it. Signed-off-by:
-
- Oct 16, 2021
-
-
Christoph Hellwig authored
Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by:
Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de Tested-by:
-
Christoph Hellwig authored
Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f ("block: move the bdi from the request_queue to the gendisk") Reported-by:
-
- Oct 02, 2021
-
-
Tetsuo Handa authored
syzbot is reporting use-after-free read at bdev_free_inode() [1], for kfree() from __alloc_disk_node() is called before bdev_free_inode() (which is called after RCU grace period) reads bdev->bd_disk and calls kfree(bdev->bd_disk). Fix use-after-free read followed by double kfree() problem by making sure that bdev->bd_disk is NULL when calling iput(). Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1] Reported-by:
syzbot <syzbot+8281086e8a6fbfbd952a@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
-
- Sep 07, 2021
-
-
Tetsuo Handa authored
If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ #757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ #757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad7 ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/b2af8a5b-3c1b-204e-7f56-bea0b15848d6@i-love.sakura.ne.jp [1] Signed-off-by:
-
- Aug 24, 2021
-
-
Christoph Hellwig authored
hidden gendisks will never be marked live. Fixes: 40b3a52f ("block: add a sanity check for a live disk in del_gendisk") Reported-by:
Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
This might have been a neat debug aid when the extended dev_t was added, but that time is long gone. Signed-off-by:
-
Christoph Hellwig authored
blk_alloc_ext_minor already returns just a minor number, so no need to mask the high bits. Signed-off-by:
-
- Aug 23, 2021
-
-
Luis Chamberlain authored
Properly unwind on errors in device_add_disk. This is the initial work as drivers are not converted yet, which will follow in separate patches. Signed-off-by:
Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210818144542.19305-10-hch@lst.de Signed-off-by:
-
Christoph Hellwig authored
Ensure that all the sysfs bits are set up before bdev_add is called, as that will make the upcomding error handling much easier. However this means the call to disk_update_readahead has to be split as that requires a bdi. Also remove various sanity checks that don't make sense now that blk_register_queue only has a single caller. Signed-off-by:
-
Christoph Hellwig authored
Doing all the sysfs file creation before adding the bdev and thus allowing it to be opened will simplify the about to be added error handling. Signed-off-by:
-
Christoph Hellwig authored
This will simplify error handling going forward. Signed-off-by:
-
Christoph Hellwig authored
Once bdev_add is called userspace can open the block device. Ensure that the struct device, which is used for refcounting of the disk besides various other things, is fully setup at that point. Signed-off-by:
-
Christoph Hellwig authored
There is no real reason these should be separate. Also simplify the groups assignment a bit. Signed-off-by:
-
Christoph Hellwig authored
Add a sanity check to del_gendisk to do nothing when the disk wasn't successfully added. This papers over the complete lack of add_disk error handling, which is about to get fixed gradually. Signed-off-by:
-
Christoph Hellwig authored
Replace the magic lookup through the kobject tree with an explicit backpointer, given that the device model links are set up and torn down at times when I/O is still possible, leading to potential NULL or invalid pointer dereferences. Fixes: edb0872f ("block: move the bdi from the request_queue to the gendisk") Reported-by:
syzbot <syzbot+aa0801b6b32dca9dda82@syzkaller.appspotmail.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20210816134624.GA24234@lst.de Signed-off-by:
-
Christoph Hellwig authored
Acquire the queue ref dropped in disk_release in __blk_alloc_disk so any allocate gendisk always has a queue reference. Signed-off-by:
-
Christoph Hellwig authored
Pass in a request_queue and assign disk->queue in __blk_alloc_disk to ensure struct gendisk always has a valid ->queue pointer. Signed-off-by:
-
Christoph Hellwig authored
This was a leftover from the legacy alloc_disk interface. Switch the scsi ULPs and dasd to set ->minors directly like all other drivers and remove the argument. Signed-off-by:
-
Christoph Hellwig authored
Pass the lockdep name to the low-level __blk_alloc_disk helper and hardcode the name for it given that the number of minors or node_id are not very useful information. While this passes a pointless argument for non-lockdep builds that is not really an issue as disk allocation is a probe time only slow path. Signed-off-by:
-
- Aug 16, 2021
-
-
Christoph Hellwig authored
inode_detach_wb references the "main" bdi of the inode. With the recent change to move the bdi from the request_queue to the gendisk this causes a guaranteed use after free when using certain cgroup configurations. The big itself is older through as any non-default inode reference (e.g. an open file descriptor) could have injected this use after free even before that. Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Reported-by:
Qian Cai <quic_qiancai@quicinc.com> Reported-by:
syzbot <syzbot+1fb38bb7d3ce0fa3e1c4@syzkaller.appspotmail.com> Signed-off-by:
-
Christoph Hellwig authored
The dev_t is used as the inode hash, so we should only released it once then block device inode is gone from the inode cache. Move it to bdev_free_inode to ensure that. Signed-off-by:
-
- Aug 12, 2021
-
-
Christoph Hellwig authored
Just check inode_unhashed on the whole device bdev inode instead, and provide a helper to check for that information. Signed-off-by:
-
- Aug 09, 2021
-
-
Christoph Hellwig authored
The backing device information only makes sense for file system I/O, and thus belongs into the gendisk and not the lower level request_queue structure. Move it there. Signed-off-by:
-
Christoph Hellwig authored
Now that device mapper has been changed to register the disk once it is fully ready all this code is unused. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20210804094147.459763-9-hch@lst.de Signed-off-by:
-
Christoph Hellwig authored
device mapper needs to register holders before it is ready to do I/O. Currently it does so by registering the disk early, which can leave the disk and queue in a weird half state where the queue is registered with the disk, except for sysfs and the elevator. And this state has been a bit promlematic before, and will get more so when sorting out the responsibilities between the queue and the disk. Support registering holders on an initialized but not registered disk instead by delaying the sysfs registration until the disk is registered. Signed-off-by:
-
Christoph Hellwig authored
Invert they way the holder relations are tracked. This very slightly reduces the memory overhead for partitioned devices. Signed-off-by:
-
- Aug 02, 2021
-
-
Matteo Croce authored
Add a new sysfs handle to export the new diskseq value. Place it in <sysfs>/block/<disk>/diskseq and document it. $ grep . /sys/class/block/*/diskseq /sys/class/block/loop0/diskseq:13 /sys/class/block/loop1/diskseq:14 /sys/class/block/loop2/diskseq:5 /sys/class/block/loop3/diskseq:6 /sys/class/block/ram0/diskseq:1 /sys/class/block/ram1/diskseq:2 /sys/class/block/vda/diskseq:7 Reviewed-by:Matteo Croce <mcroce@microsoft.com> Tested-by:
Luca Boccassi <bluca@debian.org> Link: https://lore.kernel.org/r/20210712230530.29323-5-mcroce@linux.microsoft.com Signed-off-by:
-
Matteo Croce authored
Export the newly introduced diskseq in uevents: $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ E: DEVNAME=/dev/loop0 E: DISKSEQ=1 E: DEVNAME=/dev/loop1 E: DISKSEQ=2 E: DEVNAME=/dev/loop2 E: DISKSEQ=3 E: DEVNAME=/dev/loop3 E: DISKSEQ=4 E: DEVNAME=/dev/loop4 E: DISKSEQ=5 E: DEVNAME=/dev/loop5 E: DISKSEQ=6 E: DEVNAME=/dev/loop6 E: DISKSEQ=7 E: DEVNAME=/dev/loop7 E: DISKSEQ=8 E: DEVNAME=/dev/nvme0n1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p2 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p3 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p4 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p5 E: DISKSEQ=9 E: DEVNAME=/dev/sda E: DISKSEQ=10 E: DEVNAME=/dev/sda1 E: DISKSEQ=10 E: DEVNAME=/dev/sda2 E: DISKSEQ=10 Reviewed-by:
-
