- Oct 23, 2021
-
-
Dmitry Osipenko authored
Fixed regulator can't change voltage and regulator_sync_voltage() returns -EINVAL in this case. Make regulator_sync_voltage() to succeed for regulators that are incapable to change voltage. On NVIDIA Tegra power management driver needs to sync voltage and we have one device (Trimslice) that uses fixed regulator which is getting synced. The syncing error isn't treated as fatal, but produces a noisy error message. This patch silences that error. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021183308.27786-1-digetx@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Dmitry Osipenko authored
Driver was upstreamed in 2013 and never got a user, remove it. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021192258.21968-3-digetx@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
The MFD for SY7636A still isn't merged so we need a dependency even if it ends up not having a real driver due to the header file. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 21, 2021
-
-
Kunihiko Hayashi authored
Add basic support for UniPhier NX1 SoC. This includes a compatible string and the same SoC-dependent data as PXs2 SoC. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634520605-16583-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Luca Weiss authored
Add the configuration for pm6350 regulators. The supplies are not known so leave them out for now. Additionally leave out configuration of smps3 - smps5 and ldo17 as these are not configured in the downstream kernel and the type of them is not known. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20211007212444.328034-4-luca@z3ntu.xyz Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Alistair Francis authored
Signed-off-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20211015122551.38951-5-alistair@alistair23.me Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Maíra Canal authored
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing them with the gpiod interface. Signed-off-by:
Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Nathan Chancellor authored
After this driver was converted to gpiod, clang started warning: vers/regulator/lp872x.c:689:57: error: implicit conversion from enumeration type 'enum lp872x_dvs_state' to different enumeration type 'enum gpiod_flags' [-Werror,-Wenum-conversion] dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate); ~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~ 1 error generated. lp872x_dvs_state was updated to have values from gpiod_flags but this is not enough to avoid an implicit conversion warning from either GCC or clang (although GCC enables this warning under -Wextra instead of -Wall like clang so it is not seen under normal builds). Eliminate lp872x_dvs_state in favor of using gpiod_flags everywhere so that there is no more warning about an implicit conversion. Fixes: 72bf80cf ("regulator: lp872x: replacing legacy gpio interface for gpiod") Link: https://github.com/ClangBuiltLinux/linux/issues/1481 Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211019004335.193492-1-nathan@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 16, 2021
-
-
Maíra Canal authored
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing them with the gpiod interface Signed-off-by:
Maíra Canal <maira.canal@usp.br> Message-Id: <YWma2yTyuwS5XwhY@fedora> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 08, 2021
-
-
Krzysztof Kozlowski authored
The driver and its bindings, before commit 04f9f068 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") were requiring to provide at least one safe/default voltage for DVS registers if DVS GPIO is not being enabled. IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the s5m8767,pmic-buck2-dvs-voltage should still be present and contain one voltage. This requirement was coming from driver behavior matching this condition (none of DVS GPIO is enabled): it was always initializing the DVS selector pins to 0 and keeping the DVS enable setting at reset value (enabled). Therefore if none of DVS GPIO is enabled in devicetree, driver was configuring the first DVS voltage for buck[234]. Mentioned commit 04f9f068 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") broke it because DVS voltage won't be parsed from devicetree if DVS GPIO is not enabled. After the change, driver will configure bucks to use the register reset value as voltage which might have unpleasant effects. Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled in devicetree (therefore DVS voltage is also not parsed), explicitly disable it. Cc: <stable@vger.kernel.org> Fixes: 04f9f068 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
Rob Herring <robh@kernel.org> Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 05, 2021
-
-
Mauro Carvalho Chehab authored
There are lots of fields in struct hi6421_spmi_pmic that aren't used. As a matter of fact, only regmap is needed. So, drop the struct as a whole, and set regmap as the drvdata. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by:
Mark Brown <broonie@kernel.org> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/1828cb783b1ebca0b98bf0b3077d8701adb228f7.1630586862.git.mchehab+huawei@kernel.org
-
- Oct 04, 2021
-
-
Matti Vaittinen authored
Consistently use the defines for buck control mask values. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/YVqpujZLZmaiqwe8@fedora Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Oct 01, 2021
-
-
Shawn Guo authored
PM2250 is commonly used with QCM2290/QCS2290 SoCs, and provides 4 SMPS and 22 LDO regulators. The LDO regulators are the same types found on PM660. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210926084549.29880-3-shawn.guo@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 30, 2021
-
-
Mark Brown authored
We lowered all the other constraint related log messages to debug level so lower the logging of what supplies we're configuring to debug level too. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210929140717.3769-1-broonie@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 27, 2021
-
-
Zenghui Yu authored
debugfs code complained at boot time that debugfs: Directory 'reg-dummy-regulator-dummy' with parent 'regulator' already present! if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. The problem is that we don't provide .remove() method for dummy_regulator_driver, which should invoke regulator_unregister() on device teardown to properly free things. Though it's harmless as dummy_pdev never gets unbound in practice, let's use devm_regulator_register() to get rid of the inconsistency. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20210925035507.1904-1-yuzenghui@huawei.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Anand Moon authored
devm_pwm_get() can return -EPROBE_DEFER if the pwm regulator is not ready yet. Use dev_err_probe() for pwm regulator resources to indicate the deferral reason when waiting for the resource to come up. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20210925173413.1019-1-linux.amoon@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 20, 2021
-
-
Ramona Alexandra Nechita authored
MAX8973 is supposed to be MAX8973A. Kconfig and the initial comment of max8973-regulator.c were modified accordingly. Signed-off-by:
Ramona Alexandra Nechita <ramona.nechita@analog.com> Link: https://lore.kernel.org/r/20210920061137.10884-1-ramona.nechita@analog.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 17, 2021
-
-
Maarten Lankhorst authored
i915 will soon gain an eviction path that trylock a whole lot of locks for eviction, getting dmesg failures like below: BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by i915_selftest/5776: #0: ffff888101a79240 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x160 #1: ffffc900009778c0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.63+0x39/0x1b0 [i915] #2: ffff88800cf74de8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.63+0x5f/0x1b0 [i915] #3: ffff88810c7f9e38 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x1c4/0x9d0 [i915] #4: ffff88810bad5768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] #5: ffff88810bad60e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] ... #46: ffff88811964d768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] #47: ffff88811964e0e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] INFO: lockdep is turned off. Fixing eviction to nest into ww_class_acquire is a high priority, but it requires a rework of the entire driver, which can only be done one step at a time. As an intermediate solution, add an acquire context to ww_mutex_trylock, which allows us to do proper nesting annotations on the trylocks, making the above lockdep splat disappear. This is also useful in regulator_lock_nested, which may avoid dropping regulator_nesting_mutex in the uncontended path, so use it there. TTM may be another user for this, where we could lock a buffer in a fastpath with list locks held, without dropping all locks we hold. [peterz: rework actual ww_mutex_trylock() implementations] Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YUBGPdDDjKlxAuXJ@hirez.programming.kicks-ass.net
-
Krzysztof Kozlowski authored
This reverts commit 0da6736e. The MODULE_DEVICE_TABLE already creates proper alias. Having another MODULE_ALIAS causes the alias to be duplicated: $ modinfo max14577-regulator.ko alias: platform:max77836-regulator alias: platform:max14577-regulator description: Maxim 14577/77836 regulator driver alias: platform:max77836-regulator alias: platform:max14577-regulator Cc: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 0da6736e ("regulator: max14577: Add proper module aliases strings") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210916144102.120980-1-krzysztof.kozlowski@canonical.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 15, 2021
-
-
ChiYuan Huang authored
Fix 'enable' gpio control logic from the below cases if it's specified. 1. All off and both are sequentially controlled to be on. The 'enable' gpio control block to be called twice including the delay time. 2. Both are on and one is preparing to be off. The 'enable' gpio control low before register cache is configured to be true. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1631629249-9998-1-git-send-email-u0084500@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 13, 2021
-
-
Brian Norris authored
Voltage-controlled regulators depend on their supply regulator for retrieving their voltage, and so they might return -EPROBE_DEFER at this stage. Our caller already attempts to resolve supplies and retry, so we shouldn't be printing this error to logs. Quiets log messages like this, on Rockchip RK3399 Gru/Kevin boards: [ 1.033057] ppvar_bigcpu: failed to get the current voltage: -EPROBE_DEFER ... [ 1.036735] ppvar_litcpu: failed to get the current voltage: -EPROBE_DEFER ... [ 1.040366] ppvar_gpu: failed to get the current voltage: -EPROBE_DEFER ... [ 1.044086] ppvar_centerlogic: failed to get the current voltage: -EPROBE_DEFER Cc: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20210826124015.1.Iab79c6dd374ec48beac44be2fcddd165dd26476b@changeid Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210908105752.2035-1-caihuoqing@baidu.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Cai Huoqing authored
COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86). In this case, the support of COMPILE_TEST is added, so this module could be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210908105738.1933-1-caihuoqing@baidu.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap/devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210908105745.1984-1-caihuoqing@baidu.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Sep 01, 2021
-
-
Dmitry Baryshkov authored
Fix a typo in the pm8009 LDO7 declaration, it uses resource name ldo%s6 instead of ldo%s7. Fixes: 951384ca ("regulator: qcom-rpmh-regulator: add pm8009-1 chip revision") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210901114350.1106073-1-dmitry.baryshkov@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Aug 25, 2021
-
-
Chen-Yu Tsai authored
vctrl_enable() and vctrl_disable() call regulator_enable() and regulator_disable(), respectively. However, vctrl_* are regulator ops and should not be calling the locked regulator APIs. Doing so results in a lockdep warning. Instead of exporting more internal regulator ops, model the ctrl supply as an actual supply to vctrl-regulator. At probe time this driver still needs to use the consumer API to fetch its constraints, but otherwise lets the regulator core handle the upstream supply for it. The enable/disable/is_enabled ops are not removed, but now only track state internally. This preserves the original behavior with the ops being available, but one could argue that the original behavior was already incorrect: the internal state would not match the upstream supply if that supply had another consumer that enabled the supply, while vctrl-regulator was not enabled. The lockdep warning is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc6 #2 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) but task is already holding lock: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (regulator_ww_class_mutex){+.+.}-{3:3}: __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) ww_mutex_lock (kernel/locking/mutex.c:1199) regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) regulator_lock_dependent (drivers/regulator/core.c:343) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) platform_probe (drivers/base/platform.c:1427) [...] -> #1 (regulator_ww_class_acquire){+.+.}-{0:0}: regulator_lock_dependent (include/linux/ww_mutex.h:129 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) [...] -> #0 (regulator_list_mutex){+.+.}-{3:3}: __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_acquire); lock(regulator_ww_class_mutex); lock(regulator_list_mutex); *** DEADLOCK *** 6 locks held by swapper/0/1: #0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock (drivers/base/dd.c:1030) #1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at: cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2)) #2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at: subsys_interface_register (drivers/base/bus.c:1033) #3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at: cpufreq_online (include/linux/bitmap.h:285 include/linux/cpumask.h:405 drivers/cpufreq/cpufreq.c:1399) #4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable (drivers/regulator/core.c:2808) #5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) stack backtrace: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa Hardware name: Google Scarlet (DT) Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:161) show_stack (arch/arm64/kernel/stacktrace.c:218) dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2)) dump_stack (lib/dump_stack.c:113) print_circular_bug (kernel/locking/lockdep.c:?) check_noncircular (kernel/locking/lockdep.c:?) __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] Reported-by:
Brian Norris <briannorris@chromium.org> Fixes: f8702f9e ("regulator: core: Use ww_mutex for regulators locking") Fixes: e9153311 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Chen-Yu Tsai authored
In commit e9153311 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage"), all calls to get/set the voltage of the control regulator were switched to unlocked versions to avoid deadlocks. However, the call in the probe path is done without regulator locks held. In this case the locked version should be used. Switch back to the locked regulator_get_voltage() in the probe path to avoid any mishaps. Fixes: e9153311 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210825033704.3307263-2-wenst@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Aug 23, 2021
-
-
Matti Vaittinen authored
The helper to send IRQ notification for regulator errors had still old description mentioning calling BUG() as a last resort when error status reading has kept failing for more times than a given threshold. The impementation calling BUG() did never end-up in-tree but was replaced by hopefully more sophisticated handler trying to power-off the system. Fix the documentation to reflect actual behaviour. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210823075651.GA3717293@localhost.localdomain Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Aug 09, 2021
-
-
Alistair Francis authored
Signed-off-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210806091058.141-6-alistair@alistair23.me Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Aug 03, 2021
-
-
Alistair Francis authored
Instead of storing the GPIO state in the mfd (where it isn't used) store it in the regulator. Signed-off-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210803084456.198-7-alistair@alistair23.me Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Alistair Francis authored
Use the parent's MFD data instead of our data. Signed-off-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210803084456.198-6-alistair@alistair23.me Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Alistair Francis authored
From testing on hardware the poll_enable_time isn't required and sometimes causes the driver probe to fail so let's remove it. Signed-off-by:
Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210803084456.198-5-alistair@alistair23.me Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Jisheng Zhang authored
Enable regmap cache to reduce i2c transactions and corresponding interrupts if regulator is accessed frequently. Since the register map is small, we use a FLAT regmap cache. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210803165211.3b00db29@xhacker.debian Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Jisheng Zhang authored
Enable regmap cache to reduce i2c transactions and corresponding interrupts if regulator is accessed frequently. Since the register map is small -- there's only one register in sy8824c and sy8824e, there are only two registers in sy20276 and sy20278, so we use a FLAT regmap cache. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210803165043.042ec24d@xhacker.debian Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 30, 2021
-
-
ChiYuan Huang authored
Add empty space and put constant number to the right side for 'if' judgement. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1627648326-5026-1-git-send-email-u0084500@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 26, 2021
-
-
Mauro Carvalho Chehab authored
The arrays containing the regulator's voltage ranges are currently named after the first ldo which uses such range. However, it sounds a lot clearer if those are named with the voltage range instead. No functional changes. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1bdff1d1f23753b69c8044160decfad1e8553d08.1627121912.git.mchehab+huawei@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Mauro Carvalho Chehab authored
As lowercase is generally preferred for node names, while it is not too late, change the LDO DT properties to lower case. Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/395510cffeb39aebd1763cc5de1cb00a2c40e461.1627121912.git.mchehab+huawei@kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 22, 2021
-
-
macromorgan authored
Instead of returning error directly, use dev_err_probe. This avoids messages in the dmesg log for devices which will be probed again later. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20210721165716.19915-1-macroalpha82@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 20, 2021
-
-
ChiYuan Huang authored
This adds support for Richtek RTQ2134 SubPMIC. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1626422636-29458-2-git-send-email-u0084500@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jul 19, 2021
-
-
Colin Ian King authored
There are a couple of spelling mistakes in the Kconfig text. Fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210719103429.15544-1-colin.king@canonical.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-