- Dec 13, 2021
-
-
modprobe can't handle spaces in aliases. Fixes: 6b4cd727 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by:
Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-
Ming reported that with the abort path of the descriptor submission, there can be a window where a completed descriptor can be missed to be completed by the irq completion thread: CPU A CPU B Submit (successful) Submit (fail) irq_process_work_list() // empty llist_abort_desc() // remove all descs from pending list irq_process_pending_llist() // empty exit idxd_wq_thread() with no processing Add opportunistic descriptor completion in the abort path in order to remove the missed completion. Fixes: 6b4b87f2 ("dmaengine: idxd: fix submission race window") Reported-by:
Ming Li <ming4.li@intel.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com Signed-off-by:
-
Smatch reports below warnings [1] wrt dereferencing rm_res when it can potentially be ERR_PTR(). This is possible when entire range is allocated to Linux Fix this case by making sure, there is no deference of rm_res when its ERR_PTR(). [1]: drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() Reported-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20211209180957.29036-1-vigneshr@ti.com Signed-off-by:
-
- Nov 22, 2021
-
-
Dan reports that smatch has found idxd_wq_quiesce() is being called inside the idxd->dev_lock. idxd_wq_quiesce() calls wait_for_completion() and therefore it can sleep. Move the call outside of the spinlock as it does not need device lock. Fixes: 5b0c68c4 ("dmaengine: idxd: support reporting of halt interrupt") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
The commit in the Fixes: tag has changed the logic of the code and now it is likely that the probe will return an early success (0), even if not completely executed. This should lead to a crash or similar issue later on when the code accesses to some never allocated resources. Change the '!err' into a 'err' when checking if 'dma_set_mask_and_coherent()' has failed or not. While at it, simplify the code and remove the "can't success code" related to 32 DMA mask. As stated in [1], 'dma_set_mask_and_coherent(DMA_BIT_MASK(64))' can't fail if 'dev->dma_mask' is non-NULL. And if it is NULL, it would fail for the same reason when tried with DMA_BIT_MASK(32). [1]: https://lkml.org/lkml/2021/6/7/398 Fixes: ecb8c88b ("dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/935fbb40ae930c5fe87482a41dcb73abf2257973.1636492127.git.christophe.jaillet@wanadoo.fr Signed-off-by:
-
Coverity complains of an uninitialized variable: 5. uninit_use_in_call: Using uninitialized value config.dst_per when calling axi_chan_config_write. [show details] 6. uninit_use_in_call: Using uninitialized value config.hs_sel_src when calling axi_chan_config_write. [show details] CID 121164 (#1-3 of 3): Uninitialized scalar variable (UNINIT) 7. uninit_use_in_call: Using uninitialized value config.src_per when calling axi_chan_config_write. [show details] 418 axi_chan_config_write(chan, &config); Fix this by initializing the structure to 0 which should at least be benign in axi_chan_config_write(). Also fix what looks like a cut-n-paste error when initializing config.hs_sel_dst. Fixes: 82435166 ("dmaengine: dw-axi-dmac: support DMAX_NUM_CHANNELS > 8") Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Link: https://lore.kernel.org/r/20211025181656.31658-1-tim.gardner@canonical.com Signed-off-by:
-
- Nov 09, 2021
-
-
udma_get_*() checks if rchan/tchan/rflow is already allocated by checking if it has a NON NULL value. For the error cases, rchan/tchan/rflow will have error value and udma_get_*() considers this as already allocated (PASS) since the error values are NON NULL. This results in NULL pointer dereference error while de-referencing rchan/tchan/rflow. Reset the value of rchan/tchan/rflow to NULL if a channel request fails. CC: stable@vger.kernel.org Acked-by:
Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211031032411.27235-3-kishon@ti.com Signed-off-by:
-
bcdma_get_*() checks if bchan is already allocated by checking if it has a NON NULL value. For the error cases, bchan will have error value and bcdma_get_*() considers this as already allocated (PASS) since the error values are NON NULL. This results in NULL pointer dereference error while de-referencing bchan. Reset the value of bchan to NULL if a channel request fails. CC: stable@vger.kernel.org Acked-by:
-
Using the % operator on a 64-bit variable is expensive and can cause a link failure: arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width': stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod' arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param': stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod' As we know that we just want to check the alignment in stm32_dma_get_max_width(), there is no need for a full division, and using a simple mask is a faster replacement. Same in stm32_dma_set_xfer_param(), change this to only allow burst transfers if the address is a multiple of the length. stm32_dma_get_best_burst just after will take buf_len into account to fix burst in case of misalignment. Fixes: b20fd5fa ("dmaengine: stm32-dma: fix stm32_dma_get_max_width") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211103153312.41483-1-amelie.delaunay@foss.st.com Signed-off-by:
-
- Oct 28, 2021
-
-
Add memcpy in edma. The edma has the capability to transfer data by software trigger so that it could be used for memory copy. Enable MEMCPY for edma driver and it could be test directly by dmatest. Signed-off-by:
Joy Zou <joy.zou@nxp.com> Link: https://lore.kernel.org/r/20211026090025.2777292-1-joy.zou@nxp.com Signed-off-by:
-
The wq resources needs to be released before the kernel type is reset by __drv_disable_wq(). With dma channels unregistered and wq quiesced, all the wq resources for dmaengine can be freed. There is no need to wait until wq is disabled. With the wq->type being reset to "unknown", the driver is skipping the freeing of the resources. Fixes: 0cda4f69 ("dmaengine: idxd: create dmaengine driver for wq 'device'") Reported-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Tested-by:
-
According to core-api/dma-api-howto.rst, the address from dma_alloc_coherent is gauranteed to align to the smallest PAGE_SIZE order. That supercedes the 64B/32B alignment requirement of the completion record. Remove alignment adjustment code. Tested-by:
-
DMA clients can provide one of two types of callbacks. For this reason dmaengine drivers should not directly invoke `callback`, but always use `dmaengine_desc_callback_invoke()`. This makes sure that both types of callbacks are handled correctly. The zynqmp_dma driver currently doesn't do this and only handles the `callback` type callback. If the client used the `callback_result` type callback it will not be called. Fix this by switching to `dmaengine_desc_callback_valid()` and `dmaengine_desc_callback_invoke()`. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211025075428.2094-3-lars@metafoo.de Signed-off-by:
-
DMA clients can provide one of two types of callbacks. For this reason dmaengine drivers should not directly invoke `callback`, but always use `dmaengine_desc_callback_invoke()`. This makes sure that both types of callbacks are handled correctly. The xilinx_dma driver currently doesn't do this for cyclic descriptors and only handles the `callback` type callback. If the client used the `callback_result` type callback it will not be called. Fix this by switching to `dmaengine_desc_callback_valid()` and `dmaengine_desc_callback_invoke()`. Signed-off-by:
-
DMA clients can provide one of two types of callbacks. For this reason dmaengine drivers should not directly invoke `callback`, but always use dmaengine_desc_callback_invoke(). This makes sure that both types of callbacks are handled correctly. The altera-msgdma driver currently doesn't do this and only handles the `callback` type callback. If the client used the `callback_result` type callback it will not be called. Fix this by switching to `dmaengine_desc_callback_valid()` and `dmaengine_desc_callback_invoke()`. Signed-off-by:
-
Fixed "unused variable 'atmel_xdmac_dev_pm_ops'" compilation warning when CONFIG_PM is not defined. Fixes: 8e0c7e48 ("dmaengine: at_xdmac: use pm_ptr()") Reported-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211025074002.722504-1-claudiu.beznea@microchip.com Signed-off-by:
-
Simplify assigning zero and performing a logical OR to a single assignment. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/2abd0da35608c14689a919d47dd45898a8ab4297.1635263478.git.geert@linux-m68k.org Signed-off-by:
-
In some configurations, the BAM DMA controller is set up by a remote processor and the local processor can simply start making use of it without setting up the BAM. This is already supported using the "qcom,controlled-remotely" property. However, for some reason another possible configuration is that the remote processor is responsible for powering up the BAM, but we are still responsible for initializing it (e.g. resetting it etc). This configuration is quite challenging to handle properly because the power control is handled through separate channels (e.g. device-specific SMSM interrupts / smem-states). Great care must be taken to ensure the BAM registers are not accessed while the BAM is powered off since this results in a bus stall. Attempt to support this configuration with minimal device-specific code in the bam_dma driver by tracking the number of requested channels. Consumers of DMA channels are responsible to only request DMA channels when the BAM was powered on by the remote processor, and to release them before the BAM is powered off. When the first channel is requested the BAM is initialized (reset) and it is also put into reset when the last channel was released. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20211018102421.19848-3-stephan@gerhold.net Signed-off-by:
-
- Oct 26, 2021
-
-
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions are unused, producing a warning: ../drivers/dma/sa11x0-dma.c:1042:12: error: 'sa11x0_dma_resume' defined but not used ../drivers/dma/sa11x0-dma.c:1004:12: error: 'sa11x0_dma_suspend' defined but not used Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211026020508.550-1-caihuoqing@baidu.com Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
Qing Wang <wangqing@vivo.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/1633663733-47199-7-git-send-email-wangqing@vivo.com Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1633663733-47199-6-git-send-email-wangqing@vivo.com Signed-off-by:
-
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
- Oct 25, 2021
-
-
Don't populate the read-only array ds_lut on the stack but instead it static. Also makes the object code smaller by 163 bytes: Before: text data bss dec hex filename 23508 4796 0 28304 6e90 ./drivers/dma/sh/rz-dmac.o After: text data bss dec hex filename 23281 4860 0 28141 6ded ./drivers/dma/sh/rz-dmac.o (gcc version 11.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210915112038.12407-1-colin.king@canonical.com Signed-off-by:
-
The issue happens in an error handling path. If of_dma_controller_register() fails, the function simply prints error messages and returns error code, without decrementing the reference count of pdev->device incremented earlier by dma_async_device_register(), which may result in refcount leaks. Fix it by invoking dma_async_device_unregister() before returning the error code. Signed-off-by:
Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/20210911070533.3114-1-xiongx18@fudan.edu.cn Signed-off-by:
-
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210904145813.5161-1-len.baker@gmx.com Signed-off-by:
-
Modify the prototype from xilinx_dma_tx_descriptor to xilinx_dma_alloc_tx_descriptor and xilinx_dma_channel_set_config to xilinx_vdma_channel_set_config in API description to fix below linux kernel-doc warnings. drivers/dma/xilinx/xilinx_dma.c:800: warning: expecting prototype for xilinx_dma_tx_descriptor(). Prototype was for xilinx_dma_alloc_tx_descriptor() instead. drivers/dma/xilinx/xilinx_dma.c:2471: warning: expecting prototype for xilinx_dma_channel_set_config(). Prototype was for xilinx_vdma_channel_set_config() instead. Signed-off-by:
Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1631525316-2323-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by:
-
Use the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() instead of the verbose operators ".suspend_noirq /.resume_noirq/.freeze_noirq/ .thaw_noirq/.poweroff_noirq/.restore_noirq", because the SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a nice helper macro that could be brought in to make code a little clearer, a little more concise. Signed-off-by:
-
Device reset clears the MSIXPERM table and the device registers. Re-program the MSIXPERM table and re-enable the error interrupts post reset. Fixes: 745e92a6 ("dmaengine: idxd: idxd: move remove() bits for idxd 'struct device' to device.c") Reported-by:
Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by:
-
Add halt interrupt support. Given that the misc interrupt handler already check halt state, the driver just need to run the halt handling code when receiving the halt interrupt. Signed-off-by:
-
Fix following panic on system halt: Requesting system halt [ 10.600000] spi spi0.1: spi_device 0.1 cleanup [ 10.630000] fsl_edma_chan_mux() fsl_chan->edma->n_chans 64 dmamux_nr 0 [ 10.630000] *** ZERO DIVIDE *** FORMAT=4 [ 10.630000] Current process id is 38 [ 10.630000] BAD KERNEL TRAP: 00000000 [ 10.630000] PC: [<402f09ba>] fsl_edma_chan_mux+0x7c/0x12e ... Some architecture as mcf5441x (ColdFire) may not have a dmamux, so dmamux_nr is set to 0. This patch considers this case. Signed-off-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20210901211610.662077-1-angelo.dureghello@timesys.com Signed-off-by:
-
Using list_move_tail() instead of list_del() + list_add_tail() Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Acked-by:
-
The ptdma driver has added debugfs support, but this fails to build when debugfs is disabled: drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup': drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root' 93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root' 96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root' 102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root); | ^ Remove the #ifdef in the header, as this only saves a few bytes, but would require ugly #ifdefs in each driver using it. Simplify the other user while we're at it. Fixes: e2fb2e2a ("dmaengine: ptdma: Add debugfs entries for PTDMA") Fixes: 26cf132d ("dmaengine: Create debug directories for DMA devices") Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org Signed-off-by:
-
Fault triggers on ioread32() when pci driver unbind is envoked. The placement of idxd sub-driver removal causes the probing of the device mmio region after the mmio mapping being torn down. The driver needs the sub-drivers to be unbound but not release the idxd context until all shutdown activities has been done. Move the sub-driver unregistering up before the remove() calls shutdown(). But take a device ref on the idxd->conf_dev so that the memory does not get freed in ->release(). When all cleanup activities has been done, release the ref to allow the idxd memory to be freed. [57159.542766] RIP: 0010:ioread32+0x27/0x60 [57159.547097] Code: 00 66 90 48 81 ff ff ff 03 00 77 1e 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 8b 15 03 50 41 01 b8 ff ff ff ff 85 d2 75 04 c3 <8b> 07 c3 55 83 ea 01 48 89 fe 48 c7 c7 00 70 5f 82 48 89 e5 48 83 [57159.566647] RSP: 0018:ffffc900011abb60 EFLAGS: 00010292 [57159.572295] RAX: ffffc900011e0000 RBX: ffff888107d39800 RCX: 0000000000000000 [57159.579842] RDX: 0000000000000000 RSI: ffffffff82b1e448 RDI: ffffc900011e0090 [57159.587421] RBP: ffffc900011abb88 R08: 0000000000000000 R09: 0000000000000001 [57159.594972] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881019840d0 [57159.602533] R13: ffff8881097e9000 R14: ffffffffa08542a0 R15: 00000000000003a8 [57159.610093] FS: 00007f991e0a8740(0000) GS:ffff888459900000(0000) knlGS:00000000000 00000 [57159.618614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [57159.624814] CR2: ffffc900011e0090 CR3: 000000010862a002 CR4: 00000000003706e0 [57159.632397] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [57159.639973] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [57159.647601] Call Trace: [57159.650502] ? idxd_device_disable+0x41/0x110 [idxd] [57159.655948] idxd_device_drv_remove+0x2b/0x80 [idxd] [57159.661374] idxd_config_bus_remove+0x16/0x20 [57159.666191] __device_release_driver+0x163/0x240 [57159.671320] device_release_driver+0x2b/0x40 [57159.676052] bus_remove_device+0xf5/0x160 [57159.680524] device_del+0x19c/0x400 [57159.684440] device_unregister+0x18/0x60 [57159.688792] idxd_remove+0x140/0x1c0 [idxd] [57159.693406] pci_device_remove+0x3e/0xb0 [57159.697758] __device_release_driver+0x163/0x240 [57159.702788] device_driver_detach+0x43/0xb0 [57159.707424] unbind_store+0x11e/0x130 [57159.711537] drv_attr_store+0x24/0x30 [57159.715646] sysfs_kf_write+0x4b/0x60 [57159.719710] kernfs_fop_write_iter+0x153/0x1e0 [57159.724563] new_sync_write+0x120/0x1b0 [57159.728812] vfs_write+0x23e/0x350 [57159.732624] ksys_write+0x70/0xf0 [57159.736335] __x64_sys_write+0x1a/0x20 [57159.740492] do_syscall_64+0x3b/0x90 [57159.744465] entry_SYSCALL_64_after_hwframe+0x44/0xae [57159.749908] RIP: 0033:0x7f991e19c387 [57159.753898] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [57159.773564] RSP: 002b:00007ffc2ce2d6a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [57159.781550] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f991e19c387 [57159.789133] RDX: 000000000000000c RSI: 000055ee2630e140 RDI: 0000000000000001 [57159.796695] RBP: 000055ee2630e140 R08: 0000000000000000 R09: 00007f991e2324e0 [57159.804246] R10: 00007f991e2323e0 R11: 0000000000000246 R12: 000000000000000c [57159.811800] R13: 00007f991e26f520 R14: 000000000000000c R15: 00007f991e26f700 [57159.819373] Modules linked in: idxd bridge stp llc bnep sunrpc nls_iso8859_1 intel_ rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_code c_realtek iTCO_wdt 8250_dw snd_hda_codec_generic kvm_intel ledtrig_audio iTCO_vendor_s upport snd_hda_intel snd_intel_dspcfg ppdev kvm snd_hda_codec intel_wmi_thunderbolt sn d_hwdep irqbypass iwlwifi btusb snd_hda_core rapl btrtl intel_cstate snd_seq btbcm snd _seq_device btintel snd_pcm cfg80211 bluetooth pcspkr psmouse input_leds snd_timer int el_lpss_pci mei_me intel_lpss snd ecdh_generic ecc mei ucsi_acpi i2c_i801 idma64 i2c_s mbus virt_dma soundcore typec_ucsi typec wmi parport_pc parport video mac_hid acpi_pad sch_fq_codel drm ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel usbkbd hid_generic usbmouse aesni_intel usbhid crypto_simd cryptd e1000e hid serio_ra w ahci libahci pinctrl_sunrisepoint fuse msr autofs4 [last unloaded: idxd] [57159.904082] CR2: ffffc900011e0090 [57159.907877] ---[ end trace b4e32f49ce9176a4 ]--- Fixes: 49c4959f ("dmaengine: idxd: fix sequence for pci driver remove() and shutdown()") Reported-by:
Ziye Yang <ziye.yang@intel.com> Signed-off-by:
-
Remove setting of wq type on guest kernel during configuration load on RO device config. The user will set the kernel wq type and this setting based on config is not necessary. Signed-off-by:
-
Since pm_runtime_put is done when tegra_adma_probe is successful, we cannot do pm_runtime_put_sync again in tegra_adma_remove. Fix this by removing the pm_runtime_put_sync in tegra_adma_remove. Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20211021031432.3466261-1-mudongliangabcd@gmail.com Signed-off-by:
-
The previous commit 059e969c ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") forgets to replace the pm_runtime_get_sync in the tegra_adma_probe, but removes the pm_runtime_put_noidle. Fix this by continuing to replace pm_runtime_get_sync with pm_runtime_resume_and_get in tegra_adma_probe. Fixes: 059e969c ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") Signed-off-by:
-
In rcar_dmac_probe, if pm_runtime_resume_and_get fails, it forgets to disable runtime PM. And of_dma_controller_free should only be invoked after the success of of_dma_controller_register. Fix this by refactoring the error handling code. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211020143546.3436205-1-mudongliangabcd@gmail.com Signed-off-by:
-
