igt@gem_ctx_isolation@preservation-s3|igt@i915_suspend@basic-s3-without-i915 - dmesg-warn/incomplete - WARNING:.*at drivers/pci/pci.c:\d+ pci_disable_device.*

https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12035/re-rpls-1/igt@gem_ctx_isolation@preservation-s3.html

<6> [97.531939] CPU18 is up
<6> [97.532038] smpboot: Booting Node 0 Processor 19 APIC 0x3e
<6> [97.542647] CPU19 is up
<6> [97.545787] ACPI: PM: Waking up from system sleep state S3
<6> [102.737429] ACPI: EC: interrupt unblocked
<3> [102.750834] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.755932] pcieport 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.755936] pcieport 0000:03:01.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.755939] pcieport 0000:03:03.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.755968] pcieport 0000:03:02.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.763952] xhci_hcd 0000:38:00.0: Unable to change power state from D3hot to D0, device inaccessible
<3> [102.764095] pci 0000:04:00.0: Unable to change power state from unknown to D0, device inaccessible
<7> [102.829755] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 00
<7> [102.829897] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [102.830001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [102.830127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [102.830430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [102.830541] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [102.830651] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [102.830781] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7> [102.831441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [102.831542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [102.831642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [102.831769] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.831885] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [102.831997] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.832109] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [102.832221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.832333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [102.832453] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.832568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [102.832680] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [102.832792] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [102.832891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [102.832992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [102.833105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [102.833206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<6> [102.834338] ACPI: EC: event unblocked
<6> [102.834666] pcieport 0000:00:1d.0: pciehp: Slot(8): Card not present
<3> [102.834836] xhci_hcd 0000:38:00.0: Unable to change power state from D3cold to D0, device inaccessible
<4> [102.834930] xhci_hcd 0000:38:00.0: Controller not ready at resume -19
<3> [102.837586] xhci_hcd 0000:38:00.0: PCI post-resume error -19!
<3> [102.837592] xhci_hcd 0000:38:00.0: HC died; cleaning up
<3> [102.838292] xhci_hcd 0000:38:00.0: PM: dpm_run_callback(): pci_pm_resume+0x0/0x80 returns -19
<3> [102.838309] xhci_hcd 0000:38:00.0: PM: failed to resume async: error -19
<6> [102.839963] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.1.1.bin version 70.1
<6> [102.839968] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9
<6> [102.841492] xhci_hcd 0000:38:00.0: remove, state 4
<6> [102.841522] usb usb4: USB disconnect, device number 1
<3> [102.841552] pci 0000:03:03.0: Unable to change power state from D3cold to D0, device inaccessible
<7> [102.842717] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GuC communication enabled
<6> [102.843607] i915 0000:00:02.0: [drm] HuC authenticated
<6> [102.844147] xhci_hcd 0000:38:00.0: USB bus 4 deregistered
<6> [102.844199] xhci_hcd 0000:38:00.0: remove, state 4
<6> [102.844219] usb usb3: USB disconnect, device number 1
<6> [102.844315] i915 0000:00:02.0: [drm] GuC submission enabled
<6> [102.844317] i915 0000:00:02.0: [drm] GuC SLPC enabled
<6> [102.844838] i915 0000:00:02.0: [drm] GuC RC: enabled
<7> [102.845020] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [102.845482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled
<7> [102.845586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled
<7> [102.845664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [102.845733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A
<7> [102.845799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A
<6> [102.845836] nvme nvme0: Shutdown timeout set to 10 seconds