igt@i915_pm_rpm@system-suspend-execbuf - incomplete - No warnings/errors
<7> [646.397068] i915 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY D: Too many retries, giving up. First error: -110
<7> [646.397082] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:356:HDMI-A-4]
<7> [646.422748] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:356:HDMI-A-4] ELD monitor FH-DP4K
<7> [646.422754] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:356:HDMI-A-4] ELD size 36, SAD count 2
<7> [646.422965] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
<7> [646.423094] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [646.423378] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
<7> [646.423512] i915 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [646.423522] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT
<7> [646.423631] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
<7> [646.503193] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2
<7> [646.503445] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [646.503710] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [646.503951] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [646.504217] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [646.504451] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [647.345012] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [647.345918] i915 0000:03:00.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [647.348670] i915 0000:03:00.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [647.354568] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [647.356360] i915 0000:03:00.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [647.356742] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [647.357081] i915 0000:03:00.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [647.357214] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [647.357425] i915 0000:03:00.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [647.462861] i915 0000:03:00.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [647.463403] i915 0000:03:00.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [647.464181] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [647.465005] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [647.465808] i915 0000:03:00.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [647.466705] i915 0000:03:00.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [647.467578] i915 0000:03:00.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [647.467999] i915 0000:03:00.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [647.468209] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [647.468405] i915 0000:03:00.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [647.468536] i915 0000:03:00.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [647.468877] i915 0000:03:00.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [647.470289] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [647.470420] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01
<7> [647.489847] i915 0000:03:00.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [647.492759] i915 0000:03:00.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [647.492881] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [647.493036] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:313:DP-1]
<7> [647.498777] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:325:HDMI-A-1]
<7> [647.504718] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:332:HDMI-A-2]
<7> [647.510673] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:336:DP-2]
<7> [647.516603] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:344:HDMI-A-3]
<7> [647.522553] i915 0000:03:00.0: [drm:intel_dp_detect [i915]] [CONNECTOR:348:DP-3]
<7> [647.524066] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [647.525454] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 01 to 00
<7> [647.527149] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [647.527335] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [647.527537] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling AUX_USBC2
<7> [647.555388] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.584199] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.613012] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.641826] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.670639] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.698461] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.727272] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.756085] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.784898] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.813711] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.842525] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.871338] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.900151] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.928965] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.957778] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [647.986591] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.015404] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.044218] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.073031] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.101844] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.130657] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.159471] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.188284] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.217097] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.245910] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.274727] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.303537] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.332350] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.361163] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.389976] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.418790] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.447615] i915 0000:03:00.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC2/DDI TC2/PHY D: timeout (status 0x7d40023f)
<7> [648.447801] i915 0000:03:00.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY D: Too many retries, giving up. First error: -110
<7> [648.447815] i915 0000:03:00.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:356:HDMI-A-4]
<7> [648.474250] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:356:HDMI-A-4] ELD monitor FH-DP4K
<7> [648.474256] i915 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:356:HDMI-A-4] ELD size 36, SAD count 2
<7> [648.474459] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
<7> [648.474615] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [648.474913] i915 0000:03:00.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0040 w(1)
<7> [648.475064] i915 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [648.475074] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT
<7> [648.475186] i915 0000:03:00.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
<7> [648.553118] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling AUX_USBC2
<7> [648.553374] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [648.553640] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [648.553880] i915 0000:03:00.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [648.554156] i915 0000:03:00.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [648.554389] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 01