Dmesg
<6> [289.876988] Console: switching to colour dummy device 80x25
<6> [289.877147] [IGT] i915_module_load: executing
<6> [289.889767] [IGT] i915_module_load: starting subtest reload
<7> [289.926753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [289.926896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [289.927060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [289.927192] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [289.939410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [289.940115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [289.940246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [289.940356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [289.967582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [289.968435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [289.968647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [289.968812] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [289.982992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [289.983167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [289.983354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [289.983522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [290.044719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [290.045561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [290.045812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [290.046014] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [290.059226] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [290.059352] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [290.059468] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [290.059582] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [290.059713] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [290.059829] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [290.059942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [290.060054] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [290.060165] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [290.060276] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [290.060390] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [290.060502] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [290.060612] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [290.060745] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [290.060859] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [290.060972] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [290.061084] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [290.061195] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [290.061306] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [290.061417] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [290.061529] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [290.061646] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [290.061759] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [290.061871] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [290.061982] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [290.062092] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [290.062202] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [290.062312] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [290.062423] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [290.062531] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [290.062648] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [290.062762] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [290.062873] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [290.062984] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [290.063096] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [290.063206] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [290.063498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [290.064112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [290.064248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [290.064365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [290.190249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [290.191343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [290.192025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [290.192253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7> [290.192493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7> [290.192743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7> [290.216135] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:32:plane 1A] because [FB:242] is removed
<7> [290.216319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] ddb ( 0 - 4014) -> ( 0 - 0), size 4014 -> 0
<7> [290.216594] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [290.216842] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 14, 14, 16, 17, 24, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.217038] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 63, 435, 435, 497, 528, 745, 0, 0, 77, 94, 108 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.217226] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 71, 480, 480, 548, 582, 821, 0, 0, 78, 105, 109 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.217418] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:82:pipe A] data rate 0 num active planes 0
<7> [290.217647] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200
<7> [290.217865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200
<7> [290.218079] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 0 qgv_peak_bw: 51200
<7> [290.218294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200
<7> [290.218470] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [290.218632] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [290.219272] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7> [290.219484] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [290.236285] i915 0000:00:02.0: [drm:drm_client_release] intel-fbdev
<7> [290.236865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [290.237025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [290.237142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [290.237254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [290.237365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5788527/8388608 link 385901/524288, found tu 0, data 0/0 link 0/0)
<7> [290.237480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [290.237594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [290.237724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [290.237841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [290.237953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [290.238064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [290.238176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [290.238287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [290.238399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2400, found 0)
<7> [290.238509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2401, found 0)
<7> [290.238619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2403, found 0)
<7> [290.238729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2408, found 0)
<7> [290.238839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2484, found 0)
<7> [290.238950] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2484, found 0)
<7> [290.239053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [290.239156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [290.239259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [290.239364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [290.239468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [290.239573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [290.239685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2400, found 0)
<7> [290.239796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2401, found 0)
<7> [290.239908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2403, found 0)
<7> [290.240016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2408, found 0)
<7> [290.240125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2484, found 0)
<7> [290.240235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2484, found 0)
<7> [290.240338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [290.240440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [290.240545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [290.240661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [290.240769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [290.240878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 596199, found 0)
<7> [290.240987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 596199, found 0)
<7> [290.241099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)
<7> [290.241208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [290.241313] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7> [290.241437] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [290.241538] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [290.241666] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] ddb (4014 - 4096) -> ( 0 - 0), size 82 -> 0
<7> [290.241773] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Can change cdclk via squashing
<7> [290.241885] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz
<7> [290.241996] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0
<7> [290.242117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: no [modeset]
<7> [290.242224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:32:plane 1A] fb: [NOFB], visible: no
<7> [290.242328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7> [290.242432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7> [290.242536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7> [290.242647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7> [290.242757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7> [290.243222] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [290.447095] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 0
<7> [290.448362] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [290.454142] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power off
<7> [290.454512] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [290.454782] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [290.506604] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] Wait complete
<7> [290.506955] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [290.507158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [290.507370] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7> [290.507740] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [290.508470] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7> [290.508490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7> [290.508933] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7> [290.509293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7> [290.509656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7> [290.510002] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7> [290.510349] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7> [290.510508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7> [290.510674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7> [290.510828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7> [290.510979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7> [290.511129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7> [290.511280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7> [290.511431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST A]
<7> [290.511616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST B]
<7> [290.511851] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST C]
<7> [290.512086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST D]
<7> [290.512306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DDI TC3/PHY TC3]
<7> [290.512499] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST A]
<7> [290.512682] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST B]
<7> [290.512838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST C]
<7> [290.513006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:290:DP-MST D]
<7> [290.513128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DDI TC4/PHY TC4]
<7> [290.513250] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:296:DP-MST A]
<7> [290.513379] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:297:DP-MST B]
<7> [290.513509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:298:DP-MST C]
<7> [290.513635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:299:DP-MST D]
<7> [290.513733] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:241:eDP-1]
<7> [290.513922] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [290.514047] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [290.514150] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Post changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [290.514357] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] aud_ts_cdclk set to M=60, N=432
<7> [290.514478] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [290.514713] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe A]
<7> [290.515106] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000010 0xad00071)
<7> [290.559906] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [290.562492] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [290.597348] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:241:eDP-1] removing connector from sysfs
<7> [290.598717] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:250:DP-1] removing connector from sysfs
<7> [290.598873] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:262:HDMI-A-1] removing connector from sysfs
<7> [290.599278] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:268:DP-2] removing connector from sysfs
<7> [290.599628] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:277:DP-3] removing connector from sysfs
<7> [290.600121] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:286:DP-4] removing connector from sysfs
<7> [290.600739] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:295:DP-5] removing connector from sysfs
<7> [290.629228] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle
<7> [291.111212] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [291.111677] i915 0000:00:02.0: [drm:intel_pps_wait_power_cycle [i915]] Wait complete
<7> [291.160705] i915 0000:00:02.0: [drm:component_unbind] GT1: GSC proxy mei component unbound