Err
Starting dynamic subtest: hugepages
Dmesg
<6> [711.934571] [IGT] i915_selftest: starting dynamic subtest hugepages
<5> [712.012541] Setting dangerous option live_selftests - tainting kernel
<7> [712.046159] i915 0000:03:00.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K
<7> [712.046411] i915 0000:03:00.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7> [712.046706] i915 0000:03:00.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [712.046982] i915 0000:03:00.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz
<7> [712.047492] i915 0000:03:00.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0005, instances: 0005
<7> [712.047657] i915 0000:03:00.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0003, instances: 0003
<7> [712.048297] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [712.048534] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7> [712.048765] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6> [712.048924] i915 0000:03:00.0: [drm] VT-d active for gfx access
<6> [712.048938] i915 0000:03:00.0: vgaarb: deactivate vga console
<7> [712.049283] i915 0000:03:00.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000003ffc00147
<7> [712.049547] i915 0000:03:00.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 24576K, usable: 20480K
<7> [712.049953] i915 0000:03:00.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system-ttm: 15890 MiB [mem 0x00000000-0x3e1218fff], io: n/a
<7> [712.050098] i915 0000:03:00.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(1): local0: 16288 MiB [mem 0x00000000-0x3f9ffffff], io: 16288 MiB [mem 0x4000000000-0x43f9ffffff]
<7> [712.050242] i915 0000:03:00.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 20 MiB [mem 0x3fe800000-0x3ffbfffff], io: 20 MiB [mem 0x43fe800000-0x43ffbfffff]
<7> [712.050670] i915 0000:03:00.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x0
<7> [712.050867] i915 0000:03:00.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion not supported!
<7> [712.051408] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [712.092412] i915 0000:03:00.0: [drm:intel_bios_get_vbt [i915]] Found valid VBT in SPI flash
<7> [712.092617] i915 0000:03:00.0: [drm:intel_bios_init [i915]] VBT signature "$VBT DASH G2 ", BDB version 249
<7> [712.092812] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7)
<7> [712.093004] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)
<7> [712.093195] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7> [712.093386] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [712.093587] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 814)
<7> [712.093780] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7> [712.093970] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7> [712.094165] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [712.094359] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7> [712.094593] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7> [712.094785] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)
<7> [712.094977] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7> [712.095168] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7> [712.095357] i915 0000:03:00.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [712.095598] i915 0000:03:00.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [712.095782] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7> [712.095973] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [712.096163] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [712.096353] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [712.096550] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [712.096736] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [712.096932] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 9
<7> [712.097118] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [712.097312] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9
<7> [712.097539] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [712.097734] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 9
<7> [712.097919] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port H VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [712.098114] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port H VBT HDMI level shift: 9
<7> [712.098302] i915 0000:03:00.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09
<7> [712.098543] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [712.098800] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [712.099060] i915 0000:03:00.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 163200 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [712.099313] i915 0000:03:00.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [712.099696] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [712.099884] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [712.100074] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [712.100325] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [712.100539] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [712.100791] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7> [712.100988] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7> [712.101182] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7> [712.101670] i915 0000:03:00.0: [drm:intel_dmc_init [i915]] Loading i915/dg2_dmc_ver2_08.bin
<7> [712.102388] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7> [712.102616] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0
<7> [712.102652] i915 0000:03:00.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [712.102806] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [712.102995] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [712.103182] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [712.103370] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x153c13f4 (EVT_HTP)
<7> [712.103489] i915 0000:03:00.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 10 us
<7> [712.103663] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] DMC 1:
<7> [712.103813] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)
<7> [712.103896] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0
<7> [712.103996] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 37 (37.0 usec)
<7> [712.104081] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [712.104176] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 55 (55.0 usec)
<7> [712.104270] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x1f501f18 (EVT_HTP)
<7> [712.104355] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 63 (63.0 usec)
<7> [712.104498] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [712.104625] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 125 (125.0 usec)
<7> [712.104748] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x2044200c (EVT_HTP)
<7> [712.104820] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 153 (153.0 usec)
<7> [712.104934] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc003bf00 (EVT_CTL) (disabling)
<7> [712.104999] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 245 (245.0 usec)
<7> [712.105122] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x21802100 (EVT_HTP)
<7> [712.105177] i915 0000:03:00.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 363 (363.0 usec)
<7> [712.105341] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] DMC 2:
<7> [712.105590] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0
<7> [712.105846] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f43c = 0xc003bf00 (EVT_CTL) (disabling)
<7> [712.106058] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f40c = 0x84888408 (EVT_HTP)
<7> [712.106283] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] DMC 3:
<7> [712.106491] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0
<7> [712.106677] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc003bf00 (EVT_CTL) (disabling)
<7> [712.106883] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24882408 (EVT_HTP)
<7> [712.107137] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] DMC 4:
<7> [712.107323] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [712.107551] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc003bf00 (EVT_CTL) (disabling)
<7> [712.107776] i915 0000:03:00.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94889408 (EVT_HTP)
<7> [712.109694] i915 0000:03:00.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.
<6> [712.110806] i915 0000:03:00.0: [drm] Finished loading DMC firmware i915/dg2_dmc_ver2_08.bin (v2.8)
<7> [712.112024] i915 0000:03:00.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 163200 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [712.112248] i915 0000:03:00.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7> [712.112476] i915 0000:03:00.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz
<7> [712.112694] i915 0000:03:00.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:240:DDI A/PHY A] Using AUX CH A (VBT)