Dmesg
<6> [406.955360] [IGT] i915_selftest: starting dynamic subtest hugepages
<5> [407.264579] Setting dangerous option enable_guc - tainting kernel
<5> [407.264596] Setting dangerous option enable_guc - tainting kernel
<5> [407.264608] Setting dangerous option live_selftests - tainting kernel
<7> [407.395470] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K
<7> [407.396369] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)
<6> [407.397237] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A
<7> [407.397292] i915 0000:00:02.0: [drm:intel_detect_pch [i915]] No PCH found.
<7> [407.398004] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [407.398930] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [407.400659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 266667 kHz
<7> [407.402012] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [407.402557] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [407.403207] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [407.403747] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [407.403762] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [407.404817] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [407.404948] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047
<7> [407.405545] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [407.406233] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7772 MiB [mem 0x00000000-0x1e5c64fff], io: n/a
<7> [407.406756] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a
<7> [407.407981] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79871018
<7> [407.408703] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [407.409417] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [407.410063] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [407.410710] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [407.411465] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH1 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3
<7> [407.412034] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] CH2 DIMM size: 32 Gb, width: X8, ranks: 1, type: DDR3
<7> [407.412591] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2
<7> [407.413207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [407.415066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
<7> [407.415688] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON ", BDB version 207
<7> [407.416407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)
<7> [407.417062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)
<7> [407.417674] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)
<7> [407.418406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [407.419117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)
<7> [407.419746] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)
<7> [407.420453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [407.421105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)
<7> [407.421718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)
<7> [407.422458] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)
<7> [407.423162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7> [407.423753] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [407.424457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [407.425080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [407.425739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7> [407.426495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [407.427163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:1 USB-Type-C:0 TBT:0 DSC:0
<7> [407.427761] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0
<7> [407.428465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [407.429114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0
<7> [407.429700] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 09
<7> [407.430390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [407.431173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [407.431981] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6
<7> [407.432598] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [407.433420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [407.434110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [407.434730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [407.435428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [407.436293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a
<7> [407.437057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 1 already enabled, won't reprogram it
<7> [407.437664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
<7> [407.438401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] DDI PHY 0 already enabled, won't reprogram it
<7> [407.439179] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/bxt_dmc_ver1_07.bin
<6> [407.441333] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
<7> [407.441347] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
<7> [407.442000] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7> [407.442402] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 0 us
<7> [407.442647] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0
<7> [407.443190] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7> [407.443317] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0x21c01d0 (EVT_HTP)
<7> [407.443812] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)
<7> [407.443932] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [407.444415] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)
<6> [407.444942] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
<7> [407.445063] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)
<7> [407.445677] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)
<7> [407.446396] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)
<7> [407.447053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)
<7> [407.447640] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)
<7> [407.453297] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.
<7> [407.456956] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 144000 kHz, VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6
<7> [407.457605] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz
<7> [407.458342] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 624000 kHz
<7> [407.459041] i915 0000:00:02.0: [drm:intel_ddi_init [i915]] VBT says port B has lspcon
<7> [407.459716] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI B/PHY B] Using AUX CH B (VBT)
<7> [407.460496] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:110:DDI B/PHY B]
<7> [407.464786] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [407.465596] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:122:DDI C/PHY C] Using AUX CH C (VBT)
<7> [407.466332] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:122:DDI C/PHY C]
<7> [407.626936] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX C/DDI C/PHY C: Too many retries, giving up. First error: -6
<7> [407.626984] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [407.627531] i915 0000:00:02.0: [drm:vlv_dsi_init [i915]]
<7> [407.629082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled
<7> [407.630079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe B] hw state readout: disabled
<7> [407.631076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled
<7> [407.631745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [407.632489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [407.633249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] hw state readout: disabled, pipe A
<7> [407.633963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] hw state readout: disabled, pipe A
<7> [407.634620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B
<7> [407.635395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B
<7> [407.636113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] hw state readout: disabled, pipe B
<7> [407.636756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] hw state readout: disabled, pipe B
<7> [407.637522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] hw state readout: disabled, pipe C
<7> [407.638230] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] hw state readout: disabled, pipe C
<7> [407.638945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] hw state readout: disabled, pipe C
<7> [407.639608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI B/PHY B] hw state readout: disabled, pipe A
<7> [407.640299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST A] hw state readout: disabled, pipe A
<7> [407.640914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DP-MST B] hw state readout: disabled, pipe B
<7> [407.641455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:114:DP-MST C] hw state readout: disabled, pipe C
<7> [407.642119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DDI C/PHY C] hw state readout: disabled, pipe A
<7> [407.642688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:124:DP-MST A] hw state readout: disabled, pipe A
<7> [407.643347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:125:DP-MST B] hw state readout: disabled, pipe B
<7> [407.643956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:126:DP-MST C] hw state readout: disabled, pipe C
<7> [407.644593] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL A hw state readout: pipe_mask 0x0, on 0
<7> [407.645307] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL B hw state readout: pipe_mask 0x0, on 0
<7> [407.646075] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] PORT PLL C hw state readout: pipe_mask 0x0, on 0
<7> [407.646965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:DP-1] hw state readout: disabled
<7> [407.647669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:DP-2] hw state readout: disabled
<7> [407.648377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [407.649001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz
<7> [407.649545] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:plane 3A] min_cdclk 0 kHz
<7> [407.650184] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:cursor A] min_cdclk 0 kHz
<7> [407.650886] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [407.651547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz
<7> [407.652266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz
<7> [407.652901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:plane 3B] min_cdclk 0 kHz
<7> [407.653495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:cursor B] min_cdclk 0 kHz
<7> [407.654113] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [407.654687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:plane 1C] min_cdclk 0 kHz
<7> [407.655328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:97:plane 2C] min_cdclk 0 kHz
<7> [407.655975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:105:cursor C] min_cdclk 0 kHz
<7> [407.656578] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0
<7> [407.657388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]
<7> [407.658089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe B] enable: no [setup_hw_state]
<7> [407.658658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]
<7> [407.659301] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [407.659907] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:88:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [407.660444] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [407.667942] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [176K, 824K)
<7> [407.668551] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture
<7> [407.669230] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]
<7> [407.669819] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:1 = 1000000
<7> [407.670485] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 3 GT workarounds on global
<7> [407.673617] i915 0000:00:02.0: [drm:intel_rc6_init [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 0
<7> [407.678061] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 engine workarounds on rcs'0
<7> [407.678712] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0
<7> [407.679461] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0
<7> [407.694877] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [407.695548] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs.
<7> [407.696322] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7> [407.772068] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd204f
<7> [407.772649] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0
<7> [407.773337] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000
<7> [407.773971] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [407.774512] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a6
<7> [407.775085] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x5a85000b
<7> [407.775627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [407.776288] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [407.776917] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [407.777466] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [407.778026] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [407.778618] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [407.779259] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [407.779904] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [407.780467] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no
<6> [407.784729] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/bxt_guc_70.1.1.bin version 70.1.1
<6> [407.784749] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/bxt_huc_2.0.0.bin version 2.0.0
<7> [407.800107] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 9ms, freq = 100MHz, before = 100MHz, status = 0x8002F0EC, count = 0, ret = 0
<7> [407.803151] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [407.803979] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
<6> [407.803991] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
<7> [408.035417] i915 0000:00:02.0: [drm] intel_gt_set_wedged called from __engines_record_defaults+0x2cb/0x440 [i915]
<5> [408.110537] i915 0000:00:02.0: [drm:add_taint_for_CI [i915]] CI tainted:0x9 by intel_gt_init+0xea/0x410 [i915]
<7> [408.135232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] pxp init failed with -107
<7> [408.137210] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:59:pipe A] not active, skipping
<7> [408.137808] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:88:pipe B] not active, skipping
<7> [408.138487] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:109:pipe C] not active, skipping
<7> [408.139155] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [408.139818] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [408.151113] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7> [408.156382] i915 0000:00:02.0: [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD version: 1.2
<7> [408.157942] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.159931] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.161763] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.163779] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.166289] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.168139] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)
<7> [408.169284] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.171337] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.173536] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.175307] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.177529] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.179441] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.182396] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a8 (err 0)
<7> [408.182444] i915 0000:00:02.0: [drm:lspcon_init [i915]] LSPCON detected
<7> [408.184019] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.186311] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.188514] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.190407] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.192799] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.195266] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.197713] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.199964] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.202309] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX B/DDI B/PHY B: native defer
<7> [408.203561] i915 0000:00:02.0: [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [408.205965] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX B/DDI B/PHY B: DPCD: 12 14 c4 01 01 15 01 81 00 00 04 00 0f 00 04
<7> [408.207075] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX B/DDI B/PHY B: DP branch: OUI 00-60-ad dev-ID MC2800 HW-rev 2.2 SW-rev 1.77 quirks 0x0000
<7> [408.207116] i915 0000:00:02.0: [drm:lspcon_init [i915]] Vendor: Mega Chips
<7> [408.207678] i915 0000:00:02.0: [drm:lspcon_init [i915]] Success: LSPCON init
<7> [408.209505] i915 0000:00:02.0: [drm:lspcon_detect_hdr_capability [i915]] LSPCON capable of HDR
<7> [408.210206] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:DP-1] generating connector hotplug event
<7> [408.211675] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2
<7> [408.214386] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:DP-2] generating connector hotplug event
<6> [408.214544] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
<7> [408.220284] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 2 outputs detected
<6> [408.248269] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [408.254288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input61
<7> [408.257043] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)
<7> [408.260645] [drm:drm_client_modeset_probe]
<7> [408.260728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1]
<7> [408.260749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]
<7> [408.261594] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] status updated from unknown to disconnected
<7> [408.261612] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected
<7> [408.261630] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2]
<7> [408.261646] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]
<7> [408.262753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] status updated from unknown to disconnected
<7> [408.264135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected
<7> [408.264167] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [408.264178] [drm:drm_client_modeset_probe] connector 111 enabled? no
<7> [408.264186] [drm:drm_client_modeset_probe] connector 123 enabled? no
<7> [408.264272] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [408.264297] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [408.264349] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [408.264369] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [408.266336] [drm:drm_client_modeset_probe]
<7> [408.267022] i915 0000:00:02.0: [drm] i915 display info: display version: 9
<7> [408.267041] i915 0000:00:02.0: [drm] i915 display info: cursor_needs_physical: no
<7> [408.267048] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_crawl: no
<7> [408.267054] i915 0000:00:02.0: [drm] i915 display info: has_cdclk_squash: no
<7> [408.267059] i915 0000:00:02.0: [drm] i915 display info: has_ddi: yes
<7> [408.267065] i915 0000:00:02.0: [drm] i915 display info: has_dp_mst: yes
<7> [408.267072] i915 0000:00:02.0: [drm] i915 display info: has_dsb: no
<7> [408.267079] i915 0000:00:02.0: [drm] i915 display info: has_fpga_dbg: yes
<7> [408.267086] i915 0000:00:02.0: [drm] i915 display info: has_gmch: no
<7> [408.267092] i915 0000:00:02.0: [drm] i915 display info: has_hotplug: yes
<7> [408.267097] i915 0000:00:02.0: [drm] i915 display info: has_hti: no
<7> [408.267103] i915 0000:00:02.0: [drm] i915 display info: has_ipc: yes
<7> [408.267109] i915 0000:00:02.0: [drm] i915 display info: has_overlay: no
<7> [408.267114] i915 0000:00:02.0: [drm] i915 display info: has_psr: yes
<7> [408.267121] i915 0000:00:02.0: [drm] i915 display info: has_psr_hw_tracking: yes
<7> [408.267127] i915 0000:00:02.0: [drm] i915 display info: overlay_needs_physical: no
<7> [408.267135] i915 0000:00:02.0: [drm] i915 display info: supports_tv: no
<7> [408.267141] i915 0000:00:02.0: [drm] i915 display info: has_hdcp: yes
<7> [408.267147] i915 0000:00:02.0: [drm] i915 display info: has_dmc: yes
<7> [408.267152] i915 0000:00:02.0: [drm] i915 display info: has_dsc: no
<7> [408.266923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]
<7> [408.267162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a
<7> [408.267595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]
<7> [408.268990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1]
<7> [408.268870] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [408.269025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:DP-1]
<7> [408.269519] i915 0000:00:02.0: [drm] device info: pciid=0x5a85 rev=0x0b platform=BROXTON (subplatform=0x0) gen=9
<7> [408.269532] i915 0000:00:02.0: [drm] device info: graphics version: 9
<7> [408.269538] i915 0000:00:02.0: [drm] device info: media version: 9
<7> [408.269543] i915 0000:00:02.0: [drm] device info: graphics stepping: C0
<7> [408.269548] i915 0000:00:02.0: [drm] device info: media stepping: C0
<7> [408.269553] i915 0000:00:02.0: [drm] device info: display stepping: C0
<7> [408.269558] i915 0000:00:02.0: [drm] device info: base die stepping: **
<7> [408.269562] i915 0000:00:02.0: [drm] device info: gt: 0
<7> [408.269567] i915 0000:00:02.0: [drm] device info: memory-regions: 0x21
<7> [408.269572] i915 0000:00:02.0: [drm] device info: page-sizes: 0x11000
<7> [408.269577] i915 0000:00:02.0: [drm] device info: platform: BROXTON
<7> [408.269582] i915 0000:00:02.0: [drm] device info: ppgtt-size: 48
<7> [408.269587] i915 0000:00:02.0: [drm] device info: ppgtt-type: 2
<7> [408.269591] i915 0000:00:02.0: [drm] device info: dma_mask_size: 39
<7> [408.269596] i915 0000:00:02.0: [drm] device info: is_mobile: no
<7> [408.269601] i915 0000:00:02.0: [drm] device info: is_lp: yes
<7> [408.269606] i915 0000:00:02.0: [drm] device info: require_force_probe: no
<7> [408.269610] i915 0000:00:02.0: [drm] device info: is_dgfx: no
<7> [408.269615] i915 0000:00:02.0: [drm] device info: has_64bit_reloc: yes
<7> [408.269620] i915 0000:00:02.0: [drm] device info: has_64k_pages: no
<7> [408.269624] i915 0000:00:02.0: [drm] device info: gpu_reset_clobbers_display: no
<7> [408.269640] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:DP-1] disconnected
<7> [408.269646] i915 0000:00:02.0: [drm] device info: has_reset_engine: yes
<7> [408.269654] i915 0000:00:02.0: [drm] device info: has_3d_pipeline: yes
<7> [408.269659] i915 0000:00:02.0: [drm] device info: has_flat_ccs: no
<7> [408.269665] i915 0000:00:02.0: [drm] device info: has_global_mocs: no
<7> [408.269663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2]
<7> [408.269672] i915 0000:00:02.0: [drm] device info: has_gmd_id: no
<7> [408.269678] i915 0000:00:02.0: [drm] device info: has_gt_uc: yes
<7> [408.269684] i915 0000:00:02.0: [drm] device info: has_heci_pxp: no
<7> [408.269690] i915 0000:00:02.0: [drm] device info: has_heci_gscfi: no
<7> [408.269695] i915 0000:00:02.0: [drm] device info: has_guc_deprivilege: no
<7> [408.269701] i915 0000:00:02.0: [drm] device info: has_guc_tlb_invalidation: no
<7> [408.269706] i915 0000:00:02.0: [drm] device info: has_l3_ccs_read: no
<7> [408.269712] i915 0000:00:02.0: [drm] device info: has_l3_dpf: no
<7> [408.269717] i915 0000:00:02.0: [drm] device info: has_llc: no
<7> [408.269723] i915 0000:00:02.0: [drm] device info: has_logical_ring_contexts: yes
<7> [408.269728] i915 0000:00:02.0: [drm] device info: has_logical_ring_elsq: no
<7> [408.269734] i915 0000:00:02.0: [drm] device info: has_media_ratio_mode: no
<7> [408.269739] i915 0000:00:02.0: [drm] device info: has_mslice_steering: no
<7> [408.269745] i915 0000:00:02.0: [drm] device info: has_oa_bpc_reporting: no
<7> [408.269750] i915 0000:00:02.0: [drm] device info: has_oa_slice_contrib_limits: no
<7> [408.269756] i915 0000:00:02.0: [drm] device info: has_oam: no
<7> [408.269761] i915 0000:00:02.0: [drm] device info: has_one_eu_per_fuse_bit: no
<7> [408.269767] i915 0000:00:02.0: [drm] device info: has_pxp: no
<7> [408.269772] i915 0000:00:02.0: [drm] device info: has_rc6: yes
<7> [408.269778] i915 0000:00:02.0: [drm] device info: has_rc6p: no
<7> [408.269783] i915 0000:00:02.0: [drm] device info: has_rps: yes
<7> [408.269789] i915 0000:00:02.0: [drm] device info: has_runtime_pm: yes
<7> [408.269794] i915 0000:00:02.0: [drm] device info: has_snoop: yes
<7> [408.269800] i915 0000:00:02.0: [drm] device info: has_coherent_ggtt: no
<7> [408.269805] i915 0000:00:02.0: [drm] device info: tuning_thread_rr_after_dep: no
<7> [408.269811] i915 0000:00:02.0: [drm] device info: unfenced_needs_alignment: no
<7> [408.269816] i915 0000:00:02.0: [drm] device info: hws_needs_physical: no
<7> [408.269822] i915 0000:00:02.0: [drm] device info: has_pooled_eu: no
<7> [408.269827] i915 0000:00:02.0: [drm] device info: rawclk rate: 266667 kHz
<7> [408.269930] i915 0000:00:02.0: [drm] device info: iommu: enabled
<7> [408.269939] i915 0000:00:02.0: [drm] device info: available engines: 40403
<7> [408.269946] i915 0000:00:02.0: [drm] device info: slice total: 1, mask=0001
<7> [408.269952] i915 0000:00:02.0: [drm] device info: subslice total: 2
<7> [408.269680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:123:DP-2]
<7> [408.269958] i915 0000:00:02.0: [drm] device info: slice0: 2 subslices, mask=00000006
<7> [408.269965] i915 0000:00:02.0: [drm] device info: EU total: 12
<7> [408.269969] i915 0000:00:02.0: [drm] device info: EU per subslice: 6
<7> [408.269974] i915 0000:00:02.0: [drm] device info: has slice power gating: no
<7> [408.269979] i915 0000:00:02.0: [drm] device info: has subslice power gating: yes
<7> [408.269984] i915 0000:00:02.0: [drm] device info: has EU power gating: yes
<6> [408.269989] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [408.269993] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [408.269997] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<6> [408.270005] i915: Performing live selftests with st_random_seed=0xf3c478e6 st_timeout=500
<6> [408.270011] i915: Running hugepages
<7> [408.270330] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:DP-2] disconnected
<7> [408.270355] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [408.270365] [drm:drm_client_modeset_probe] connector 111 enabled? no
<7> [408.270373] [drm:drm_client_modeset_probe] connector 123 enabled? no
<7> [408.270070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a
<7> [408.270457] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [408.270481] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [408.270519] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [408.270537] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [408.373980] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<4> [408.414560] i915: probe of 0000:00:02.0 failed with error -25
<6> [409.305724] [IGT] i915_selftest: finished subtest hugepages, FAIL
<6> [409.307334] [IGT] i915_selftest: finished subtest live, FAIL
<6> [409.314304] [IGT] i915_selftest: exiting, ret=98