PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.

Fixes: 0cce5f28 ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e3fcd29)
Cc: stable@vger.kernel.org # 6.12.x

[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.

After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.

[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.

v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.

Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42c854b8)
Cc: stable@vger.kernel.org

Need to use the correct IP block type.  VCE vs VCN.
Fixes mclk issues on Hawaii.

Suggested by selendym.

Fixes: 82ae6619 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Closes: drm/amd#3997


Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 02438acd)
Cc: stable@vger.kernel.org

[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.

[How]
Cancel the delayed work when destroying workqueue.

Closes: drm/amd#4006


Fixes: da3fd7ac ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 725a04ba)
Cc: stable@vger.kernel.org

[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.

It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.

Also fixes the indentation in get_norm_pix_clk.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 274a87eb)
Cc: stable@vger.kernel.org

[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.

[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.

Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e19e2b5)
Cc: stable@vger.kernel.org

[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54 ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().

[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC).  This avoids a
brightness flicker from kernel changing the value.  Userspace may however
still change it during boot.

Fixes: 2fe87f54 ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0747acf3)
Cc: stable@vger.kernel.org

[Why]

It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.

In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).

But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.

This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.

[How]

Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1ba19e)
Cc: stable@vger.kernel.org

When userspace invokes S4 the flow is:

1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system

Then on resume amdgpu_pmops_restore() is called.

This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.

This includes turning the display hardware back on and discovering
connectors again.

This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.

Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: drm/amd#2038


Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com


Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8d)

Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.

So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.

Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: drm/amd#3942


Fixes: e6a901a0 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd4b125e)
Cc: stable@vger.kernel.org

We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.

Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba795235)
Cc: stable@vger.kernel.org # 6.12.x

Merge tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Use the specified $(LD) when building userprogs with Clang

 - Pass the correct target triple when compile-testing UAPI headers
   with Clang

 - Fix pacman-pkg build error with KBUILD_OUTPUT

* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
  docs: Kconfig: fix defconfig description
  kbuild: hdrcheck: fix cross build with clang
  kbuild: userprogs: use correct lld when linking through clang

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for some reported issues. These
  contain:

   - typec driver fixes

   - dwc3 driver fixes

   - xhci driver fixes

   - renesas controller fixes

   - gadget driver fixes

   - a new USB quirk added

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Fix NULL pointer access
  usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
  usb: xhci: Fix host controllers "dying" after suspend and resume
  usb: dwc3: Set SUSPENDENABLE soon after phy init
  usb: hub: lack of clearing xHC resources
  usb: renesas_usbhs: Flush the notify_hotplug_work
  usb: renesas_usbhs: Use devm_usb_get_phy()
  usb: renesas_usbhs: Call clk_put()
  usb: dwc3: gadget: Prevent irq storm when TH re-executes
  usb: gadget: Check bmAttributes only if configuration is valid
  xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
  usb: xhci: Enable the TRB overfetch quirk on VIA VL805
  usb: gadget: Fix setting self-powered state on suspend
  usb: typec: ucsi: increase timeout for PPM reset operations
  acpi: typec: ucsi: Introduce a ->poll_cci method
  usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
  usb: gadget: Set self-powered based on MaxPower and bmAttributes
  usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
  usb: atm: cxacru: fix a flaw in existing endpoint checks

Merge tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core fix that resolves a reported memory leak.

  It's been in linux-next for 2 weeks now with no reported problems"

* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: core: fix device leak in __fw_devlink_relax_cycles()

Pull char/misc/IIO driver fixes from Greg KH:
 "Here are a number of misc and char and iio driver fixes that have been
  sitting in my tree for way too long. They contain:

   - iio driver fixes for reported issues

   - regression fix for rtsx_usb card reader

   - mei and mhi driver fixes

   - small virt driver fixes

   - ntsync permissions fix

   - other tiny driver fixes for reported problems.

  All of these have been in linux-next for quite a while with no
  reported issues"

* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
  Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
  ntsync: Check wait count based on byte size.
  bus: simple-pm-bus: fix forced runtime PM use
  char: misc: deallocate static minor in error path
  eeprom: digsy_mtc: Make GPIO lookup table match the device
  drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
  binderfs: fix use-after-free in binder_devices
  slimbus: messaging: Free transaction ID in delayed interrupt scenario
  vbox: add HAS_IOPORT dependency
  cdx: Fix possible UAF error in driver_override_show()
  intel_th: pci: Add Panther Lake-P/U support
  intel_th: pci: Add Panther Lake-H support
  intel_th: pci: Add Arrow Lake support
  intel_th: msu: Fix less trivial kernel-doc warnings
  intel_th: msu: Fix kernel-doc warnings
  MAINTAINERS: change maintainer for FSI
  ntsync: Set the permissions to be 0666
  bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
  mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
  mei: me: add panther lake P DID
  ...

Pull KVM fixes from Paolo Bonzini:
 "arm64:

   - Fix a couple of bugs affecting pKVM's PSCI relay implementation
     when running in the hVHE mode, resulting in the host being entered
     with the MMU in an unknown state, and EL2 being in the wrong mode

  x86:

   - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow

   - Ensure DEBUGCTL is context switched on AMD to avoid running the
     guest with the host's value, which can lead to unexpected bus lock
     #DBs

   - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
     properly emulate BTF. KVM's lack of context switching has meant BTF
     has always been broken to some extent

   - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
     the guest can enable DebugSwap without KVM's knowledge

   - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
     to RO memory" phase without actually generating a write-protection
     fault

   - Fix a printf() goof in the SEV smoke test that causes build
     failures with -Werror

   - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
     PERFMON_V2 isn't supported by KVM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
  KVM: selftests: Fix printf() format goof in SEV smoke test
  KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
  KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
  KVM: SVM: Save host DR masks on CPUs with DebugSwap
  KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
  KVM: arm64: Initialize HCR_EL2.E2H early
  KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
  KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
  KVM: x86: Snapshot the host's DEBUGCTL in common x86
  KVM: SVM: Suppress DEBUGCTL.BTF on AMD
  KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
  KVM: selftests: Assert that STI blocking isn't set after event injection
  KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow

KVM x86 fixes for 6.14-rcN #2

 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.

 - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
   the host's value, which can lead to unexpected bus lock #DBs.

 - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
   emulate BTF.  KVM's lack of context switching has meant BTF has always been
   broken to some extent.

 - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
   can enable DebugSwap without KVM's knowledge.

 - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
   memory" phase without actually generating a write-protection fault.

 - Fix a printf() goof in the SEV smoke test that causes build failures with
   -Werror.

 - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
   isn't supported by KVM.

Merge tag 'kvmarm-fixes-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.14, take #4

- Fix a couple of bugs affecting pKVM's PSCI relay implementation
  when running in the hVHE mode, resulting in the host being entered
  with the MMU in an unknown state, and EL2 being in the wrong mode.

Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "33 hotfixes. 24 are cc:stable and the remainder address post-6.13
  issues or aren't considered necessary for -stable kernels.

  26 are for MM and 7 are for non-MM.

   - "mm: memory_failure: unmap poisoned folio during migrate properly"
     from Ma Wupeng fixes a couple of two year old bugs involving the
     migration of hwpoisoned folios.

   - "selftests/damon: three fixes for false results" from SeongJae Park
     fixes three one year old bugs in the SAMON selftest code.

  The remainder are singletons and doubletons. Please see the individual
  changelogs for details"

* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
  mm/page_alloc: fix uninitialized variable
  rapidio: add check for rio_add_net() in rio_scan_alloc_net()
  rapidio: fix an API misues when rio_add_net() fails
  MAINTAINERS: .mailmap: update Sumit Garg's email address
  Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
  mm: fix finish_fault() handling for large folios
  mm: don't skip arch_sync_kernel_mappings() in error paths
  mm: shmem: remove unnecessary warning in shmem_writepage()
  userfaultfd: fix PTE unmapping stack-allocated PTE copies
  userfaultfd: do not block on locking a large folio with raised refcount
  mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
  mm: shmem: fix potential data corruption during shmem swapin
  mm: fix kernel BUG when userfaultfd_move encounters swapcache
  selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
  selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
  selftests/damon/damos_quota: make real expectation of quota exceeds
  include/linux/log2.h: mark is_power_of_2() with __always_inline
  NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
  mm, swap: avoid BUG_ON in relocate_cluster()
  mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
  ...

Pull more x86 fixes from Ingo Molnar:

 - Add more model IDs to the AMD microcode version check, more people
   are hitting these checks

 - Fix a Xen guest boot warning related to AMD northbridge setup

 - Fix SEV guest bugs related to a recent changes in its locking logic

 - Fix a missing definition of PTRS_PER_PMD that assembly builds can hit

* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Add some forgotten models to the SHA check
  x86/mm: Define PTRS_PER_PMD for assembly code too
  virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
  virt: sev-guest: Allocate request data dynamically
  x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()

Borislav Petkov (AMD) authored 2 weeks ago and Ingo Molnar committed 2 weeks ago

Add some more forgotten models to the SHA check.

Fixes: 50cef76d ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix bugs in kernel build, hibernation, memory management and KVM"

* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Fix GPA size issue about VM
  LoongArch: KVM: Reload guest CSR registers after sleep
  LoongArch: KVM: Add interrupt checking for AVEC
  LoongArch: Set hugetlb mmap base address aligned with pmd size
  LoongArch: Set max_pfn with the PFN of the last page
  LoongArch: Use polling play_dead() when resuming from hibernation
  LoongArch: Eliminate superfluous get_numa_distances_cnt()
  LoongArch: Convert unreachable() to BUG()

Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.

Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.

Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.

Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.

Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.

Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.

Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

With ltp test case "testcases/bin/hugefork02", there is a dmesg error
report message such as:

 kernel BUG at mm/hugetlb.c:5550!
 Oops - BUG[#1]:
 CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241
 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940
 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000
 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000
 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000
 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001
 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280
 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10
 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08
    ra: 9000000000485538 unmap_vmas+0x130/0x218
   ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0
  PRMD: 00000004 (PPLV0 +PIE -PWE)
  EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
  ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
 ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
 Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64)
 Call Trace:
 [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0
 [<9000000000485534>] unmap_vmas+0x12c/0x218
 [<9000000000494068>] exit_mmap+0xe0/0x308
 [<900000000025fdc4>] mmput+0x74/0x180
 [<900000000026a284>] do_exit+0x294/0x898
 [<900000000026aa30>] do_group_exit+0x30/0x98
 [<900000000027bed4>] get_signal+0x83c/0x868
 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0
 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138
 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4

The problem is that base address allocated from hugetlbfs is not aligned
with pmd size. Here add a checking for hugetlbfs and align base address
with pmd size. After this patch the test case "testcases/bin/hugefork02"
passes to run.

This is similar to the commit 7f24cbc9 ("mm/mmap: teach
generic_get_unmapped_area{_topdown} to handle hugetlb mappings").

Cc: stable@vger.kernel.org  # 6.13+
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".

 # stress-ng --verbose --physpage 1 -t 1
 stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
 stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
 stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
 ...

After applying this patch, the kernel can pass the test.

 # stress-ng --verbose --physpage 1 -t 1
 stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
 stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
 stress-ng: debug: [1700] physpage: [1701] terminated (success)

Cc: stable@vger.kernel.org  # 6.8+
Fixes: ff6c3d81 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.

So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.

This solution is a little similar to commit 406f992e ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").

Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In LoongArch, get_numa_distances_cnt() isn't in use, resulting in a
compiler warning.

Fix follow errors with clang-18 when W=1e:

arch/loongarch/kernel/acpi.c:259:28: error: unused function 'get_numa_distances_cnt' [-Werror,-Wunused-function]
  259 | static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
      |                            ^~~~~~~~~~~~~~~~~~~~~~
1 error generated.

Link: https://lore.kernel.org/all/Z7bHPVUH4lAezk0E@kernel.org/


Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:

  kexec_reboot() falls through to next function crash_shutdown_secondary()

Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).

Cc: stable@vger.kernel.org  # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull s390 fixes from Vasily Gorbik:

 - Fix return address recovery of traced function in ftrace to ensure
   reliable stack unwinding

 - Fix compiler warnings and runtime crashes of vDSO selftests on s390
   by introducing a dedicated GNU hash bucket pointer with correct
   32-bit entry size

 - Fix test_monitor_call() inline asm, which misses CC clobber, by
   switching to an instruction that doesn't modify CC

* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ftrace: Fix return address recovery of traced function
  selftests/vDSO: Fix GNU hash table entry size for s390x
  s390/traps: Fix test_monitor_call() inline assembly

Andy reported the following build warning from head_32.S:

  In file included from arch/x86/kernel/head_32.S:29:
  arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
       59 | #if PTRS_PER_PMD > 1

The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.

Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com

Pull slab fix from Vlastimil Babka:

 - Stable fix for kmem_cache_destroy() called from a WQ_MEM_RECLAIM
   workqueue causing a warning due to the new kvfree_rcu_barrier()
   (Uladzislau Rezki)

* tag 'slab-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq

Pull ACPI fix from Rafael Wysocki:
 "Restore the previous behavior of the ACPI platform_profile sysfs
  interface that has been changed recently in a way incompatible with
  the existing user space (Mario Limonciello)"

* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86/amd: pmf: Add balanced-performance to hidden choices
  platform/x86/amd: pmf: Add 'quiet' to hidden choices
  ACPI: platform_profile: Add support for hidden choices

Pull core dumping fix from Kees Cook:

 - Only sort VMAs when core_sort_vma sysctl is set

* tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  coredump: Only sort VMAs when core_sort_vma sysctl is set

Pull btrfs fixes from David Sterba:

 - fix leaked extent map after error when reading chunks

 - replace use of deprecated strncpy

 - in zoned mode, fixed range when ulocking extent range, causing a hang

* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix a leaked chunk map issue in read_one_chunk()
  btrfs: replace deprecated strncpy() with strscpy()
  btrfs: zoned: fix extent range end unlock in cow_file_range()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - TCP use after free fix on polling (Sagi)
      - Controller memory buffer cleanup fixes (Icenowy)
      - Free leaking requests on bad user passthrough commands (Keith)
      - TCP error message fix (Maurizio)
      - TCP corruption fix on partial PDU (Maurizio)
      - TCP memory ordering fix for weakly ordered archs (Meir)
      - Type coercion fix on message error for TCP (Dan)

 - Name the RQF flags enum, fixing issues with anon enums and BPF import
   of it

 - ublk parameter setting fix

 - GPT partition 7-bit conversion fix

* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
  block: Name the RQF flags enum
  nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
  block: fix conversion of GPT partition name to 7-bit
  ublk: set_params: properly check if parameters can be applied
  nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
  nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
  nvme-tcp: Fix a C2HTermReq error message
  nvmet: remove old function prototype
  nvme-ioctl: fix leaked requests on mapping error
  nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
  nvme-pci: clean up CMBMSC when registering CMB fails
  nvme-tcp: fix possible UAF in nvme_tcp_poll

Pull io_uring fix from Jens Axboe:
 "A single fix for a regression introduced in the 6.14 merge window,
  causing stalls/hangs with IOPOLL reads or writes"

* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
  io_uring/rw: ensure reissue path is correctly handled for IOPOLL