Full freeze on boot - kernels after 6.10 - R7 260
On fedora 40, I run an
AMD R7 260 with radeon.cik_support=0 radeon.si_support=0 amdgpu.cik_support=1 amdgpu.si_support=1 amdgpu.dc=1
in order to get 144Hz on this 2560x1440 DisplayPort monitor.
Unfortunately, Fedora started offering kernels 6.11 which broke amdgpu on this older GPU.
I currently run on kernel 6.10.12 which initializes correctly.
I can't get logs from boot failure as journalctl -b -1 doesn't return that particular boot on kernel 6.12.
Activity
Hello @mangix,
I faced the same issue with
R9 280X, so I bisected it to agd5f/linux@e6a901a0.git bisect log
git bisect start # status: waiting for both good and bad commits # bad: [98f7e32f20d28ec452afb208f9cffc08448a2652] Linux 6.11 git bisect bad 98f7e32f20d28ec452afb208f9cffc08448a2652 # status: waiting for good commit(s), bad commit known # good: [a5819099f601c1af5b86b1f5921a56859e45b19a] Merge branch 'runtime-constants' git bisect good a5819099f601c1af5b86b1f5921a56859e45b19a # bad: [2fd4130e53db0958167510eddbca0f09dc858109] Merge tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace git bisect bad 2fd4130e53db0958167510eddbca0f09dc858109 # good: [51835949dda3783d4639cfa74ce13a3c9829de00] Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next git bisect good 51835949dda3783d4639cfa74ce13a3c9829de00 # bad: [ed3165d660d8c4e4ba540bfaa461594e01b3815b] drm/amdgpu/jpeg5: reprogram doorbell setting after power up for each playback git bisect bad ed3165d660d8c4e4ba540bfaa461594e01b3815b # bad: [fe6f61d4729780269b2a454fdd5b5e038f0db0e4] drm/amd/display: Remove reduntant comparisons by Coverity git bisect bad fe6f61d4729780269b2a454fdd5b5e038f0db0e4 # bad: [56116dc7a9fdd2ce2b0e01d16f772a766a0219e0] Revert "drm/amd/display: Enable SYMCLK gating in DCCG" git bisect bad 56116dc7a9fdd2ce2b0e01d16f772a766a0219e0 # bad: [b32edc2340c6ed9164093aaf43f8fe8eb04e20e7] drm/amdgpu: skip dpm check to init imu fw git bisect bad b32edc2340c6ed9164093aaf43f8fe8eb04e20e7 # bad: [8e9f1575d188f8d8c36b55164a672ad6a7b0ec04] drm/amdgpu: Add mmhub v4_1_0 ip block support (v4) git bisect bad 8e9f1575d188f8d8c36b55164a672ad6a7b0ec04 # good: [ff518e13eb5b7efd4740bcb4a25ea1fdfb76be90] drm/amdgpu/mes11: adjust mes initialization sequence git bisect good ff518e13eb5b7efd4740bcb4a25ea1fdfb76be90 # good: [202dc359addab29451d3d18243c3d957da5392c8] drm/amd/display: Defer handling mst up request in resume git bisect good 202dc359addab29451d3d18243c3d957da5392c8 # good: [523ee6f4419bbeccbe43399d999f37381b5958c7] drm/amd/display: For FPO + Vactive check that all pipes support VA git bisect good 523ee6f4419bbeccbe43399d999f37381b5958c7 # bad: [2d696cc837eaf5394d79bfd2b0b0483c4778aa83] drm/amd/display: Change ASSR disable sequence git bisect bad 2d696cc837eaf5394d79bfd2b0b0483c4778aa83 # bad: [d2c5cb0c3561d7aaa5d1cbe30ec4dd50c09291be] drm/amd/display: Enable Replay for DCN315 git bisect bad d2c5cb0c3561d7aaa5d1cbe30ec4dd50c09291be # bad: [e6a901a00822659181c93c86d8bbc2a17779fddc] drm/amd/display: use even ODM slice width for two pixels per container git bisect bad e6a901a00822659181c93c86d8bbc2a17779fddc # good: [a8baec4623aedf36d50767627f6eae5ebf07c6fb] drm/amd/display: Fix FEC_READY write on DP LT git bisect good a8baec4623aedf36d50767627f6eae5ebf07c6fb # first bad commit: [e6a901a00822659181c93c86d8bbc2a17779fddc] drm/amd/display: use even ODM slice width for two pixels per containerdmesg
[ 0.000000] Linux version 6.9.0-rc5-x86_64 (root@heavy) (gcc (Gentoo 14.2.1_p20250301 p8) 14.2.1 20250301, GNU ld (Gentoo 2.43 p3) 2.43.1) #1 SMP PREEMPT_DYNAMIC Thu Mar 6 05:03:31 +03 2025 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.9.0-rc5-x86_64 root=/dev/sda1 ro modprobe.blacklist=radeon amdgpu.si_support=1 amdgpu.dc=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfe9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe9e000-0x00000000cfedffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599/770-C45 (MS-7599), BIOS V1.15 03/04/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3007.478 MHz processor [ 0.005656] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005659] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.014646] AGP: No AGP bridge found [ 0.014730] last_pfn = 0x330000 max_arch_pfn = 0x400000000 [ 0.014737] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.014739] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.014867] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.014877] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.018266] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.018282] Using GB pages for direct mapping [ 0.018419] RAMDISK: [mem 0x37975000-0x37cb1fff] [ 0.018424] ACPI: Early table checksum verification disabled [ 0.018427] ACPI: RSDP 0x00000000000FAB70 000014 (v00 ACPIAM) [ 0.018432] ACPI: RSDT 0x00000000CFE90000 000040 (v01 7599MS A7599100 20110304 MSFT 00000097) [ 0.018437] ACPI: FACP 0x00000000CFE90200 000084 (v01 7599MS A7599100 20110304 MSFT 00000097) [ 0.018443] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615) [ 0.018447] ACPI: DSDT 0x00000000CFE905D0 0098F4 (v01 A7599 A7599100 00000100 INTL 20051117) [ 0.018451] ACPI: FACS 0x00000000CFE9E000 000040 [ 0.018454] ACPI: APIC 0x00000000CFE90390 00007C (v01 7599MS A7599100 20110304 MSFT 00000097) [ 0.018458] ACPI: MCFG 0x00000000CFE90410 00003C (v01 7599MS OEMMCFG 20110304 MSFT 00000097) [ 0.018461] ACPI: OEMB 0x00000000CFE9E040 000072 (v01 7599MS A7599100 20110304 MSFT 00000097) [ 0.018465] ACPI: SRAT 0x00000000CFE99ED0 0000D8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.018468] ACPI: HPET 0x00000000CFE99FB0 000038 (v01 7599MS OEMHPET 20110304 MSFT 00000097) [ 0.018472] ACPI: SSDT 0x00000000CFE99FF0 000672 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.018475] ACPI: Reserving FACP table memory at [mem 0xcfe90200-0xcfe90283] [ 0.018477] ACPI: Reserving DSDT table memory at [mem 0xcfe905d0-0xcfe99ec3] [ 0.018478] ACPI: Reserving FACS table memory at [mem 0xcfe9e000-0xcfe9e03f] [ 0.018479] ACPI: Reserving APIC table memory at [mem 0xcfe90390-0xcfe9040b] [ 0.018480] ACPI: Reserving MCFG table memory at [mem 0xcfe90410-0xcfe9044b] [ 0.018482] ACPI: Reserving OEMB table memory at [mem 0xcfe9e040-0xcfe9e0b1] [ 0.018483] ACPI: Reserving SRAT table memory at [mem 0xcfe99ed0-0xcfe99fa7] [ 0.018484] ACPI: Reserving HPET table memory at [mem 0xcfe99fb0-0xcfe99fe7] [ 0.018485] ACPI: Reserving SSDT table memory at [mem 0xcfe99ff0-0xcfe9a661] [ 0.018516] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.018517] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.018518] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.018521] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.018523] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.018524] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x32fffffff] [ 0.018527] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.018530] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x32fffffff] -> [mem 0x00000000-0x32fffffff] [ 0.018534] NODE_DATA(0) allocated [mem 0x32fffb000-0x32fffffff] [ 0.018566] Zone ranges: [ 0.018567] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018569] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.018571] Normal [mem 0x0000000100000000-0x000000032fffffff] [ 0.018573] Device empty [ 0.018574] Movable zone start for each node [ 0.018575] Early memory node ranges [ 0.018576] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.018577] node 0: [mem 0x0000000000100000-0x00000000cfe8ffff] [ 0.018579] node 0: [mem 0x0000000100000000-0x000000032fffffff] [ 0.018582] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fffffff] [ 0.018587] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018632] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.070065] On node 0, zone Normal: 368 pages in unavailable ranges [ 0.070258] ACPI: PM-Timer IO Port: 0x808 [ 0.070273] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 [ 0.070276] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.070278] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.070283] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.070284] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.070293] CPU topo: Max. logical packages: 3 [ 0.070294] CPU topo: Max. logical dies: 3 [ 0.070295] CPU topo: Max. dies per package: 1 [ 0.070300] CPU topo: Max. threads per core: 1 [ 0.070301] CPU topo: Num. cores per package: 3 [ 0.070302] CPU topo: Num. threads per package: 3 [ 0.070303] CPU topo: Allowing 3 present CPUs plus 3 hotplug CPUs [ 0.070315] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.070317] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.070318] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e5fff] [ 0.070319] PM: hibernation: Registered nosave memory: [mem 0x000e6000-0x000fffff] [ 0.070321] PM: hibernation: Registered nosave memory: [mem 0xcfe90000-0xcfe9dfff] [ 0.070322] PM: hibernation: Registered nosave memory: [mem 0xcfe9e000-0xcfedffff] [ 0.070323] PM: hibernation: Registered nosave memory: [mem 0xcfee0000-0xcfefffff] [ 0.070324] PM: hibernation: Registered nosave memory: [mem 0xcff00000-0xffefffff] [ 0.070325] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.070327] [mem 0xcff00000-0xffefffff] available for PCI devices [ 0.070330] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.075204] setup_percpu: NR_CPUS:256 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.075949] percpu: Embedded 53 pages/cpu s176328 r8192 d32568 u262144 [ 0.075956] pcpu-alloc: s176328 r8192 d32568 u262144 alloc=1*2097152 [ 0.075959] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.075979] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.9.0-rc5-x86_64 root=/dev/sda1 ro modprobe.blacklist=radeon amdgpu.si_support=1 amdgpu.dc=1 [ 0.076036] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.9.0-rc5-x86_64", will be passed to user space. [ 0.080000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.081999] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.082058] Fallback order for Node 0: 0 [ 0.082063] Built 1 zonelists, mobility grouping on. Total pages: 3095957 [ 0.082064] Policy zone: Normal [ 0.082066] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.082068] AGP: Checking aperture... [ 0.091400] AGP: No AGP bridge found [ 0.091402] AGP: Node 0: aperture [bus addr 0xc8000000-0xc9ffffff] (32MB) [ 0.091404] Aperture pointing to e820 RAM. Ignoring. [ 0.091405] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.091406] AGP: Please enable the IOMMU option in the BIOS setup [ 0.091406] AGP: This costs you 64MB of RAM [ 0.091409] AGP: Mapping aperture over RAM [mem 0xc8000000-0xcbffffff] (65536KB) [ 0.091411] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcbffffff] [ 0.091498] software IO TLB: area num 8. [ 0.175582] Memory: 12193704K/12581048K available (12288K kernel code, 2255K rwdata, 4240K rodata, 1416K init, 2836K bss, 387084K reserved, 0K cma-reserved) [ 0.175643] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.175676] ftrace: allocating 35556 entries in 139 pages [ 0.179815] ftrace: allocated 139 pages with 4 groups [ 0.180313] Dynamic Preempt: voluntary [ 0.180367] rcu: Preemptible hierarchical RCU implementation. [ 0.180368] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.180370] Trampoline variant of Tasks RCU enabled. [ 0.180371] Rude variant of Tasks RCU enabled. [ 0.180372] Tracing variant of Tasks RCU enabled. [ 0.180372] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.180374] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.180381] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.180384] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.180386] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.185352] NR_IRQS: 16640, nr_irqs: 472, preallocated irqs: 16 [ 0.185567] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.185636] spurious 8259A interrupt: IRQ7. [ 0.188355] Console: colour VGA+ 80x25 [ 0.188358] printk: legacy console [tty0] enabled [ 0.193320] ACPI: Core revision 20230628 [ 0.193436] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.193493] APIC: Switch to symmetric I/O mode setup [ 0.193884] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.198493] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b59dd602c8, max_idle_ns: 440795202126 ns [ 0.198541] Calibrating delay loop (skipped), value calculated using timer frequency.. 6014.95 BogoMIPS (lpj=3007478) [ 0.198602] LVT offset 0 assigned for vector 0xf9 [ 0.198642] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.198679] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.198724] x86/fpu: x87 FPU will use FXSAVE [ 0.199062] Freeing SMP alternatives memory: 28K [ 0.199101] pid_max: default: 32768 minimum: 301 [ 0.199158] LSM: initializing lsm=capability [ 0.199264] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.199352] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.303513] smpboot: CPU0: AMD Athlon(tm) II X3 440 Processor (family: 0x10, model: 0x5, stepping: 0x2) [ 0.303536] Performance Events: AMD PMU driver. [ 0.303536] ... version: 0 [ 0.303536] ... bit width: 48 [ 0.303536] ... generic registers: 4 [ 0.303536] ... value mask: 0000ffffffffffff [ 0.303536] ... max period: 00007fffffffffff [ 0.303536] ... fixed-purpose events: 0 [ 0.303536] ... event mask: 000000000000000f [ 0.303655] signal: max sigframe size: 1440 [ 0.303727] rcu: Hierarchical SRCU implementation. [ 0.303765] rcu: Max phase no-delay instances is 400. [ 0.304044] MCE: In-kernel MCE decoding enabled. [ 0.304116] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.304652] smp: Bringing up secondary CPUs ... [ 0.304818] smpboot: x86: Booting SMP configuration: [ 0.304856] .... node #0, CPUs: #1 #2 [ 0.306608] smp: Brought up 1 node, 3 CPUs [ 0.306632] smpboot: Total of 3 processors activated (18044.86 BogoMIPS) [ 0.308604] devtmpfs: initialized [ 0.308619] x86/mm: Memory block size: 128MB [ 0.310144] ACPI: PM: Registering ACPI NVS region [mem 0xcfe9e000-0xcfedffff] (270336 bytes) [ 0.310263] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.310308] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.310436] pinctrl core: initialized pinctrl subsystem [ 0.310618] PM: RTC time: 05:07:40, date: 2025-03-06 [ 0.310863] thermal_sys: Registered thermal governor 'fair_share' [ 0.310864] thermal_sys: Registered thermal governor 'step_wise' [ 0.310914] cpuidle: using governor ladder [ 0.310990] cpuidle: using governor menu [ 0.311032] node 0 link 0: io port [1000, ffffff] [ 0.311035] TOM: 00000000d0000000 aka 3328M [ 0.311072] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.311075] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.311078] node 0 link 0: mmio [f0000000, ffffffff] [ 0.311081] node 0 link 0: mmio [a0000, bffff] [ 0.311084] node 0 link 0: mmio [d0000000, dfffffff] [ 0.311086] TOM2: 0000000330000000 aka 13056M [ 0.311122] bus: [bus 00-07] on node 0 link 0 [ 0.311124] bus: 00 [io 0x0000-0xffff] [ 0.311126] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.311127] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.311128] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.311130] bus: 00 [mem 0x330000000-0xfcffffffff] [ 0.311153] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.311153] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.311153] PCI: Using configuration type 1 for base access [ 0.311153] PCI: Using configuration type 1 for extended access [ 0.311153] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.311153] mtrr: probably your BIOS does not setup all CPUs. [ 0.311540] mtrr: corrected configuration. [ 0.311600] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.311724] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.311763] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.311801] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.311838] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.312552] Demotion targets for Node 0: null [ 0.312783] cryptd: max_cpu_qlen set to 1000 [ 0.313007] ACPI: Added _OSI(Module Device) [ 0.313045] ACPI: Added _OSI(Processor Device) [ 0.313082] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.313118] ACPI: Added _OSI(Processor Aggregator Device) [ 0.316095] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.330591] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.330799] ACPI: Interpreter enabled [ 0.330855] ACPI: PM: (supports S0 S1 S4 S5) [ 0.330893] ACPI: Using IOAPIC for interrupt routing [ 0.330974] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.331717] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.331773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.331814] PCI: Using E820 reservations for host bridge windows [ 0.331952] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.336587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336637] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.336869] PCI host bridge to bus 0000:00 [ 0.336907] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.336946] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.336984] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.337025] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.337065] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window] [ 0.337105] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.337146] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.337199] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 conventional PCI endpoint [ 0.337251] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size [ 0.337391] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 PCIe Root Port [ 0.337443] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.337483] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.337522] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.337542] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.337586] pci 0000:00:02.0: enabling Extended Tags [ 0.337649] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.337768] pci 0000:00:05.0: [1002:597b] type 01 class 0x060400 PCIe Root Port [ 0.337820] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.337860] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.337906] pci 0000:00:05.0: enabling Extended Tags [ 0.337967] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.338079] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 PCIe Root Port [ 0.338131] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.338170] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.338209] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.338250] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.338295] pci 0000:00:06.0: enabling Extended Tags [ 0.338356] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.338490] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.338553] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.338599] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.338644] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.338689] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.338734] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.338779] pci 0000:00:11.0: BAR 5 [mem 0xfe8ffc00-0xfe8fffff] [ 0.338931] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.338988] pci 0000:00:12.0: BAR 0 [mem 0xfe8fe000-0xfe8fefff] [ 0.339147] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.339203] pci 0000:00:12.1: BAR 0 [mem 0xfe8fd000-0xfe8fdfff] [ 0.339367] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.339423] pci 0000:00:12.2: BAR 0 [mem 0xfe8ff800-0xfe8ff8ff] [ 0.339567] pci 0000:00:12.2: supports D1 D2 [ 0.339604] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.339718] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.339774] pci 0000:00:13.0: BAR 0 [mem 0xfe8fc000-0xfe8fcfff] [ 0.339932] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.339989] pci 0000:00:13.1: BAR 0 [mem 0xfe8f7000-0xfe8f7fff] [ 0.340157] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.340213] pci 0000:00:13.2: BAR 0 [mem 0xfe8ff400-0xfe8ff4ff] [ 0.340332] pci 0000:00:13.2: supports D1 D2 [ 0.340369] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.340490] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.340684] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.340740] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.340786] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.340831] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.340876] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.340921] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.340978] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.341016] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.341053] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.341091] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.341221] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.341282] pci 0000:00:14.2: BAR 0 [mem 0xfe8f0000-0xfe8f3fff 64bit] [ 0.341387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.341493] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.341685] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.341756] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.341876] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.341933] pci 0000:00:14.5: BAR 0 [mem 0xfe8f6000-0xfe8f6fff] [ 0.342091] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 conventional PCI endpoint [ 0.342179] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 conventional PCI endpoint [ 0.342266] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 conventional PCI endpoint [ 0.342349] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 conventional PCI endpoint [ 0.342435] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 conventional PCI endpoint [ 0.342564] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.342616] pci 0000:01:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.342662] pci 0000:01:00.0: BAR 2 [mem 0xfe9c0000-0xfe9fffff 64bit] [ 0.342704] pci 0000:01:00.0: BAR 4 [io 0xd000-0xd0ff] [ 0.342750] pci 0000:01:00.0: ROM [mem 0xfe9a0000-0xfe9bffff pref] [ 0.342792] pci 0000:01:00.0: enabling Extended Tags [ 0.342845] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.342922] pci 0000:01:00.0: supports D1 D2 [ 0.342959] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.343024] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.343134] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.343548] pci 0000:01:00.1: BAR 0 [mem 0xfe99c000-0xfe99ffff 64bit] [ 0.343612] pci 0000:01:00.1: enabling Extended Tags [ 0.343684] pci 0000:01:00.1: supports D1 D2 [ 0.343792] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.343882] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint [ 0.343940] pci 0000:02:00.0: BAR 0 [mem 0xfeaff000-0xfeafffff 64bit] [ 0.344063] pci 0000:02:00.0: PME# supported from D0 D3cold [ 0.344560] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:05.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.344656] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.344741] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 0.344795] pci 0000:03:00.0: BAR 0 [io 0xe800-0xe8ff] [ 0.344852] pci 0000:03:00.0: BAR 2 [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.344902] pci 0000:03:00.0: BAR 4 [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.344947] pci 0000:03:00.0: ROM [mem 0xfebe0000-0xfebfffff pref] [ 0.345054] pci 0000:03:00.0: supports D1 D2 [ 0.345091] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.345234] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.345286] pci_bus 0000:04: extended config space not accessible [ 0.345385] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.345430] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.345471] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.345511] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.345537] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.345578] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode) [ 0.345618] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.346153] ACPI: PCI: Interrupt link LNKA configured for IRQ 7 [ 0.346225] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.346294] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.346362] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.346431] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.346469] ACPI: PCI: Interrupt link LNKE disabled [ 0.346571] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.346608] ACPI: PCI: Interrupt link LNKF disabled [ 0.346675] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 [ 0.346744] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.346781] ACPI: PCI: Interrupt link LNKH disabled [ 0.346961] iommu: Default domain type: Translated [ 0.346998] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.347145] SCSI subsystem initialized [ 0.347192] libata version 3.00 loaded. [ 0.347196] ACPI: bus type USB registered [ 0.347244] usbcore: registered new interface driver usbfs [ 0.347287] usbcore: registered new interface driver hub [ 0.347331] usbcore: registered new device driver usb [ 0.347379] mc: Linux media interface: v0.10 [ 0.347420] videodev: Linux video capture interface: v2.00 [ 0.347473] EDAC MC: Ver: 3.0.0 [ 0.347612] PCI: Using ACPI for IRQ routing [ 0.356783] PCI: pci_cache_line_size set to 64 bytes [ 0.356842] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.356845] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff] [ 0.356869] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.356869] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.356869] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.356869] vgaarb: loaded [ 0.356869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.356869] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.358600] clocksource: Switched to clocksource tsc-early [ 0.358702] VFS: Disk quotas dquot_6.6.0 [ 0.358748] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.358823] ACPI: Failed to create genetlink family for ACPI event [ 0.358871] pnp: PnP ACPI init [ 0.359184] pnp 00:01: [dma 0 disabled] [ 0.359400] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.359441] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.359659] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.359698] system 00:03: [io 0x040b] has been reserved [ 0.359736] system 00:03: [io 0x04d6] has been reserved [ 0.359774] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.359812] system 00:03: [io 0x0c14] has been reserved [ 0.359850] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.359888] system 00:03: [io 0x0c52] has been reserved [ 0.359926] system 00:03: [io 0x0c6c] has been reserved [ 0.359963] system 00:03: [io 0x0c6f] has been reserved [ 0.360001] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.360040] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.360078] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.360116] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.360154] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.360192] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.360230] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.360268] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.360306] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.360344] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.360382] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.360420] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.360459] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.360612] system 00:04: [io 0x0600-0x06df] has been reserved [ 0.360651] system 00:04: [io 0x0ae0-0x0aef] has been reserved [ 0.360750] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.360877] pnp 00:06: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.360939] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.360978] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.361017] system 00:06: [mem 0x00100000-0xcfefffff] could not be reserved [ 0.361055] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.361177] pnp: PnP ACPI: found 7 devices [ 0.367504] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.367605] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.367645] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.367684] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.367723] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.367766] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.367804] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.367845] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.367883] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.367921] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.367960] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.368003] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.368051] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.368089] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.368126] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.368164] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.368202] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window] [ 0.368240] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.368278] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.368315] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.368353] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.368393] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.368431] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.368468] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.368506] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.368546] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.368587] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.368625] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.368663] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.368701] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff window] [ 0.368739] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.391744] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6b0 took 22384 usecs [ 0.413747] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6b0 took 21425 usecs [ 0.435744] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6b0 took 21249 usecs [ 0.457746] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6b0 took 21425 usecs [ 0.479746] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6b0 took 21236 usecs [ 0.479853] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.480067] PCI: CLS 64 bytes, default 64 [ 0.480119] PCI-DMA: Disabling AGP. [ 0.480213] Unpacking initramfs... [ 0.480246] PCI-DMA: aperture base @ c8000000 size 65536 KB [ 0.480300] PCI-DMA: using GART IOMMU. [ 0.480337] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.480431] software IO TLB: tearing down default memory pool [ 0.482185] LVT offset 1 assigned for vector 0x400 [ 0.482238] LVT offset 1 assigned [ 0.484405] perf: AMD IBS detected (0x0000001f) [ 0.485741] Initialise system trusted keyrings [ 0.485860] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.485918] zbud: loaded [ 0.486090] ntfs3: Max link count 4000 [ 0.486155] fuse: init (API version 7.40) [ 0.502551] Key type asymmetric registered [ 0.502590] Asymmetric key parser 'x509' registered [ 0.502639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.502758] io scheduler mq-deadline registered [ 0.502806] io scheduler kyber registered [ 0.503593] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.503681] ACPI: button: Power Button [PWRB] [ 0.503754] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.503826] ACPI: button: Power Button [PWRF] [ 0.504314] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.504455] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.507290] Non-volatile memory driver v1.3 [ 0.507361] ACPI: bus type drm_connector registered [ 0.507669] loop: module loaded [ 0.507762] ahci 0000:00:11.0: version 3.0 [ 0.508047] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 0.508092] ahci 0000:00:11.0: 6/6 ports implemented (port mask 0x3f) [ 0.508130] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.508918] scsi host0: ahci [ 0.509089] scsi host1: ahci [ 0.509241] scsi host2: ahci [ 0.509390] scsi host3: ahci [ 0.509540] scsi host4: ahci [ 0.509705] scsi host5: ahci [ 0.509792] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 27 lpm-pol 0 [ 0.509834] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 27 lpm-pol 0 [ 0.509875] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 27 lpm-pol 0 [ 0.509916] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 27 lpm-pol 0 [ 0.509957] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 27 lpm-pol 0 [ 0.509998] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 27 lpm-pol 0 [ 0.510373] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 0.510450] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 0.510525] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 0.565859] hub 1-0:1.0: USB hub found [ 0.565910] hub 1-0:1.0: 3 ports detected [ 0.566210] ehci-pci 0000:00:12.2: EHCI Host Controller [ 0.566421] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 0.566464] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.566513] ehci-pci 0000:00:12.2: debug port 1 [ 0.566601] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 0.573616] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.573893] hub 2-0:1.0: USB hub found [ 0.573935] hub 2-0:1.0: 6 ports detected [ 0.625690] hub 1-0:1.0: USB hub found [ 0.625743] hub 1-0:1.0: 3 ports detected [ 0.625933] ehci-pci 0000:00:13.2: EHCI Host Controller [ 0.626038] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 0.626081] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.626131] ehci-pci 0000:00:13.2: debug port 1 [ 0.626213] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 0.632619] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.632895] hub 3-0:1.0: USB hub found [ 0.632938] hub 3-0:1.0: 6 ports detected [ 0.633128] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 0.633210] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.633271] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 0.688858] hub 4-0:1.0: USB hub found [ 0.688911] hub 4-0:1.0: 3 ports detected [ 0.689290] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 0.689385] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.689453] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 0.744866] hub 5-0:1.0: USB hub found [ 0.744919] hub 5-0:1.0: 3 ports detected [ 0.745295] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 0.745382] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.745442] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8f7000 [ 0.800847] hub 6-0:1.0: USB hub found [ 0.800900] hub 6-0:1.0: 3 ports detected [ 0.801279] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 0.801365] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 0.801428] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8f6000 [ 0.820358] ata3: SATA link down (SStatus 0 SControl 300) [ 0.821358] ata4: SATA link down (SStatus 0 SControl 300) [ 0.822356] ata2: SATA link down (SStatus 0 SControl 300) [ 0.823626] ata6: SATA link down (SStatus 0 SControl 300) [ 0.824359] ata5: SATA link down (SStatus 0 SControl 300) [ 0.825361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.825481] ata1.00: ATA-9: OCZ-TRION150, SAFZ12.2, max UDMA/133 [ 0.825539] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.825676] ata1.00: Features: Dev-Sleep [ 0.825914] ata1.00: configured for UDMA/133 [ 0.826086] scsi 0:0:0:0: Direct-Access ATA OCZ-TRION150 12.2 PQ: 0 ANSI: 5 [ 0.826461] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 0.826510] sd 0:0:0:0: [sda] Write Protect is off [ 0.826548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.826560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.826621] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.827198] sda: sda1 [ 0.827292] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.848601] Freeing initrd memory: 3316K [ 0.856840] hub 7-0:1.0: USB hub found [ 0.856893] hub 7-0:1.0: 2 ports detected [ 0.857261] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.857344] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 0.857584] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 0.857810] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.857892] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 0.857934] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 0.858115] hub 8-0:1.0: USB hub found [ 0.858161] hub 8-0:1.0: 1 port detected [ 0.858387] hub 9-0:1.0: USB hub found [ 0.858432] hub 9-0:1.0: 4 ports detected [ 0.858651] usbcore: registered new interface driver usblp [ 0.858715] usbcore: registered new interface driver usb-storage [ 0.858813] i8042: PNP: No PS/2 controller found. [ 0.858850] i8042: Probing ports directly. [ 0.859256] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.859299] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.859472] mousedev: PS/2 mouse device common for all mice [ 0.859695] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 0.859776] rtc_cmos 00:00: RTC can wake from S4 [ 0.860038] rtc_cmos 00:00: registered as rtc0 [ 0.860102] rtc_cmos 00:00: setting system clock to 2025-03-06T05:07:40 UTC (1741237660) [ 0.860156] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.860220] i2c_dev: i2c /dev entries driver [ 0.860295] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20230628/utaddress-204) [ 0.860352] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.860427] usbcore: registered new interface driver uvcvideo [ 0.860777] hid: raw HID events driver (C) Jiri Kosina [ 0.860859] usbcore: registered new interface driver usbhid [ 0.860897] usbhid: USB HID core driver [ 0.861130] microcode: Current revision: 0x010000c6 [ 0.861236] IPI shorthand broadcast: enabled [ 0.862850] sched_clock: Marking stable (854240745, 7942381)->(871084609, -8901483) [ 0.863029] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.863166] Loading compiled-in X.509 certificates [ 0.865657] Loaded X.509 cert 'Build time autogenerated kernel key: b542b9bab76bd085ea92cdd5fe699e5797b2be92' [ 0.874383] Key type encrypted registered [ 0.874529] PM: Magic number: 1:25:112 [ 0.874577] usbmon usbmon8: hash matches [ 0.874791] acpi_cpufreq: overriding BIOS provided _PSD data [ 0.875050] clk: Disabling unused clocks [ 0.876293] Freeing unused kernel image (initmem) memory: 1416K [ 0.876357] Write protecting the kernel read-only data: 18432k [ 0.877170] Freeing unused kernel image (rodata/data gap) memory: 1904K [ 0.877219] Run /init as init process [ 0.877255] with arguments: [ 0.877257] /init [ 0.877258] with environment: [ 0.877259] HOME=/ [ 0.877260] TERM=linux [ 0.877261] BOOT_IMAGE=/boot/vmlinuz-6.9.0-rc5-x86_64 [ 1.062665] usb 1-1: new full-speed USB device number 2 using ohci-pci [ 1.096653] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 1.166653] usb usb9-port1: over-current condition [ 1.225443] hub 8-1:1.0: USB hub found [ 1.225759] hub 8-1:1.0: 4 ports detected [ 1.241141] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/input/input5 [ 1.248471] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0 [ 1.254493] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input6 [ 1.254689] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input7 [ 1.306123] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input8 [ 1.306275] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1 [ 1.311355] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2 [ 1.353019] usb usb9-port2: over-current condition [ 1.429526] udevd[969]: error getting socket: Function not implemented [ 1.429533] udevd[969]: error initializing udev control socket [ 1.441033] tsc: Refined TSC clocksource calibration: 3007.569 MHz [ 1.441060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b5a33a2c32, max_idle_ns: 440795267715 ns [ 1.441113] clocksource: Switched to clocksource tsc [ 1.495769] EXT4-fs (sda1): mounted filesystem 57cc1fc8-dc68-46c4-bf8b-d9370a3bddd5 ro with ordered data mode. Quota mode: none. [ 1.854054] usb 1-2: new full-speed USB device number 3 using ohci-pci [ 2.034625] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/0003:04D9:A073.0004/input/input10 [ 2.087234] hid-generic 0003:04D9:A073.0004: input,hidraw3: USB HID v1.10 Keyboard [Ione USB Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 2.096557] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.1/0003:04D9:A073.0005/input/input11 [ 2.096822] input: Ione USB Gaming Mouse System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.1/0003:04D9:A073.0005/input/input12 [ 2.149201] input: Ione USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.1/0003:04D9:A073.0005/input/input13 [ 2.149380] hid-generic 0003:04D9:A073.0005: input,hiddev2,hidraw4: USB HID v1.10 Mouse [Ione USB Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 2.157715] hid-generic 0003:04D9:A073.0006: hiddev3,hidraw5: USB HID v1.10 Device [Ione USB Gaming Mouse] on usb-0000:00:12.0-2/input2 [ 2.555032] usb 2-4: new high-speed USB device number 4 using ehci-pci [ 3.060056] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 3.228918] input: USB PnP Audio Device as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:0C76:161E.0007/input/input15 [ 3.281937] hid-generic 0003:0C76:161E.0007: input,hidraw6: USB HID v1.00 Device [USB PnP Audio Device] on usb-0000:00:12.1-2/input2 [ 3.543323] v4l2loopback: disagrees about version of symbol module_layout [ 4.354689] EXT4-fs (sda1): re-mounted 57cc1fc8-dc68-46c4-bf8b-d9370a3bddd5 r/w. Quota mode: none. [ 4.381281] EXT4-fs (sda1): re-mounted 57cc1fc8-dc68-46c4-bf8b-d9370a3bddd5 r/w. Quota mode: none. [ 4.599169] Adding 8388604k swap on /root/.swap. Priority:-2 extents:576 across:200155136k SS [ 5.596020] random: crng init done [ 22.043165] [drm] amdgpu kernel modesetting enabled. [ 22.043732] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1462:0x2775 0x00). [ 22.043791] [drm] register mmio base: 0xFE9C0000 [ 22.043795] [drm] register mmio size: 262144 [ 22.043967] [drm] add ip block number 0 <si_common> [ 22.043971] [drm] add ip block number 1 <gmc_v6_0> [ 22.043973] [drm] add ip block number 2 <si_ih> [ 22.043975] [drm] add ip block number 3 <gfx_v6_0> [ 22.043977] [drm] add ip block number 4 <si_dma> [ 22.043979] [drm] add ip block number 5 <si_dpm> [ 22.043981] [drm] add ip block number 6 <dm> [ 22.043982] [drm] add ip block number 7 <uvd_v3_1> [ 22.081573] [drm] BIOS signature incorrect 5b 7 [ 22.081585] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 22.081591] caller pci_map_rom+0x77/0x1d0 mapping multiple BARs [ 22.082736] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 22.082740] amdgpu: ATOM BIOS: 113-C3865000-X77 [ 22.082755] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 22.083934] Console: switching to colour dummy device 80x25 [ 22.083942] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 22.083949] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 22.084032] [drm] PCIE gen 2 link speeds already enabled [ 22.084036] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 22.098293] amdgpu 0000:01:00.0: amdgpu: VRAM: 3072M 0x000000F400000000 - 0x000000F4BFFFFFFF (3072M used) [ 22.098305] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 22.098318] [drm] Detected VRAM RAM=3072M, BAR=256M [ 22.098321] [drm] RAM width 384bits GDDR5 [ 22.098500] [drm] amdgpu: 3072M of VRAM memory ready [ 22.098505] [drm] amdgpu: 5989M of GTT memory ready. [ 22.098524] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 22.098991] amdgpu 0000:01:00.0: amdgpu: PCIE GART of 1024M enabled (table at 0x000000F400A00000). [ 22.103202] [drm] Internal thermal controller with fan control [ 22.103221] [drm] amdgpu: dpm initialized [ 22.107406] [drm] Found UVD firmware Version: 64.0 Family ID: 13 [ 22.283061] amdgpu 0000:01:00.0: [drm] dce60_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 22.283084] amdgpu 0000:01:00.0: [drm] dce60_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4! [ 22.283095] amdgpu 0000:01:00.0: [drm] Unsupported Connector type:0! [ 22.283097] amdgpu 0000:01:00.0: [drm] Unsupported Connector type:0! [ 22.283099] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 6 in connector table of size 6. [ 22.283619] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 7 in connector table of size 6. [ 22.284119] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 8 in connector table of size 6. [ 22.284654] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 9 in connector table of size 6. [ 22.285156] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 10 in connector table of size 6. [ 22.285621] [drm:bios_parser_get_connector_id [amdgpu]] *ERROR* Can't find connector id 11 in connector table of size 6. [ 22.286187] [drm] Display Core v3.2.282 initialized on Unknown [ 22.683887] [drm] UVD initialized successfully. [ 22.683922] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32 [ 23.023110] amdgpu 0000:01:00.0: amdgpu: Runtime PM not available [ 23.023490] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:01:00.0 on minor 0 [ 23.025888] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.025903] #PF: supervisor instruction fetch in kernel mode [ 23.025906] #PF: error_code(0x0010) - not-present page [ 23.025910] PGD 0 P4D 0 [ 23.025914] Oops: 0010 [#1] PREEMPT SMP [ 23.025919] CPU: 0 PID: 75 Comm: kworker/0:4 Not tainted 6.9.0-rc5-x86_64 #1 [ 23.025923] Hardware name: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599/770-C45 (MS-7599), BIOS V1.15 03/04/2011 [ 23.025928] Workqueue: events work_for_cpu_fn [ 23.025935] RIP: 0010:0x0 [ 23.025942] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.025945] RSP: 0018:ffffa844842c78d8 EFLAGS: 00010212 [ 23.025948] RAX: ffffffffc0da7fe0 RBX: 0000000000000000 RCX: ffff9c794d3402d8 [ 23.025952] RDX: 0000000000000000 RSI: ffff9c794d328000 RDI: ffff9c794d028058 [ 23.025955] RBP: ffffa844842c7910 R08: ffff9c794d300000 R09: 0000000000000002 [ 23.025959] R10: 0000000000000000 R11: 00000000ffffffff R12: ffff9c794d028000 [ 23.025962] R13: 0000000000000780 R14: 0000000000000780 R15: 0000000000000001 [ 23.025965] FS: 0000000000000000(0000) GS:ffff9c7b63c00000(0000) knlGS:0000000000000000 [ 23.025969] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.025973] CR2: ffffffffffffffd6 CR3: 0000000102dbc000 CR4: 00000000000006f0 [ 23.025976] Call Trace: [ 23.025980] <TASK> [ 23.025983] ? __die_body.cold+0x19/0x2a [ 23.025990] ? page_fault_oops+0x9a/0x190 [ 23.025994] ? exc_page_fault+0x6c/0x150 [ 23.025999] ? asm_exc_page_fault+0x22/0x30 [ 23.026006] calculate_odm_slice_in_timing_active+0x118/0x1b0 [amdgpu] [ 23.026503] resource_build_scaling_params+0x34/0xc80 [amdgpu] [ 23.026968] ? dce110_get_pix_clk_dividers+0x274/0x2b0 [amdgpu] [ 23.027434] resource_append_dpp_pipes_for_plane_composition+0x169/0x220 [amdgpu] [ 23.027897] dc_state_add_plane+0xb9/0x150 [amdgpu] [ 23.028359] create_validate_stream_for_sink+0x303/0x380 [amdgpu] [ 23.028816] amdgpu_dm_connector_mode_valid+0x5f/0x1c0 [amdgpu] [ 23.029272] ? drm_connector_list_update+0x17a/0x1e0 [ 23.029278] drm_connector_mode_valid+0x30/0x50 [ 23.029284] __drm_helper_update_and_validate+0xfe/0x3f0 [ 23.029289] drm_helper_probe_single_connector_modes+0x319/0x610 [ 23.029294] ? drm_client_modeset_probe+0x123/0x18c0 [ 23.029300] drm_client_modeset_probe+0x230/0x18c0 [ 23.029306] ? drm_exec_fini+0x17/0x50 [drm_exec] [ 23.029313] __drm_fb_helper_initial_config_and_unlock+0x3b/0x420 [ 23.029318] ? amdgpu_driver_open_kms+0xcd/0x250 [amdgpu] [ 23.029738] ? drm_file_alloc+0x1af/0x250 [ 23.029743] drm_fbdev_generic_client_hotplug+0x67/0xa0 [ 23.029750] drm_client_register+0x5a/0x90 [ 23.029756] amdgpu_pci_probe+0x3c0/0x3d0 [amdgpu] [ 23.030177] local_pci_probe+0x3c/0x80 [ 23.030183] work_for_cpu_fn+0x10/0x20 [ 23.030188] process_one_work+0x148/0x310 [ 23.030192] worker_thread+0x31a/0x460 [ 23.030197] ? _raw_spin_lock_irqsave+0x17/0x40 [ 23.030202] ? rescuer_thread+0x470/0x470 [ 23.030206] kthread+0xda/0x110 [ 23.030210] ? kthread_complete_and_exit+0x20/0x20 [ 23.030214] ret_from_fork+0x2d/0x50 [ 23.030219] ? kthread_complete_and_exit+0x20/0x20 [ 23.030222] ret_from_fork_asm+0x11/0x20 [ 23.030227] </TASK> [ 23.030229] Modules linked in: amdgpu(+) i2c_algo_bit drm_ttm_helper ttm drm_exec drm_suballoc_helper amdxcp drm_buddy gpu_sched drm_display_helper [ 23.030243] CR2: 0000000000000000 [ 23.030247] ---[ end trace 0000000000000000 ]--- [ 23.030250] RIP: 0010:0x0 [ 23.030255] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.030258] RSP: 0018:ffffa844842c78d8 EFLAGS: 00010212 [ 23.030262] RAX: ffffffffc0da7fe0 RBX: 0000000000000000 RCX: ffff9c794d3402d8 [ 23.030265] RDX: 0000000000000000 RSI: ffff9c794d328000 RDI: ffff9c794d028058 [ 23.030269] RBP: ffffa844842c7910 R08: ffff9c794d300000 R09: 0000000000000002 [ 23.030272] R10: 0000000000000000 R11: 00000000ffffffff R12: ffff9c794d028000 [ 23.030275] R13: 0000000000000780 R14: 0000000000000780 R15: 0000000000000001 [ 23.030278] FS: 0000000000000000(0000) GS:ffff9c7b63c00000(0000) knlGS:0000000000000000 [ 23.030283] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.030286] CR2: ffffffffffffffd6 CR3: 0000000102dbc000 CR4: 00000000000006f0 [ 23.030290] note: kworker/0:4[75] exited with irqs disabledIt turns out, the root cause of the issue is missing
.is_two_pixels_per_containerhere.Would you mind testing that fix on your machine?
Best regards!
added DC label
added bisected label
mentioned in commit agd5f/linux@bd4b125e
mentioned in commit agd5f/linux@e204aab7
mentioned in commit nouveau@fefa811e
mentioned in commit nouveau@36d04c93
Please register or sign in to reply