The long lines stood out, break them by putting the summary on its own
line.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>

It makes the structure consistent with most other protocols and
provides a clear separation between what is done by the server and what
is done by the client.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Split out toplevel window like requests and events into a new interface
called xdg_toplevel, and turn xdg_surface into a generic base interface
which others extends.

xdg_popup is changed to extend the xdg_surface.

The configure event in xdg_surface was split up making
xdg_surface.configure an event only carrying the serial number, while a
new xdg_toplevel.configure event carries the other data previously sent
via xdg_surface.configure. xdg_toplevel.configure is made to extend,
via the latch-state mechanism, xdg_surface.configure and depends on
that event to synchronize state.

Other future xdg_surface based extensions are meant to also extend
xdg_surface.configure for relevant window type dependend state
synchronization.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike@samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Olivier Fourdan authored 8 years ago and Jonas Ådahl committed 8 years ago

Some application may wish to restrict their window in size, but
xdg-shell has no mechanism for the client to specify a maximum or
minimum size.

As a result, the compositor may try to maximize or fullscreen a window
while the client would not allow for the requested size.

Add new requests "set_max_size" and "set_min_size" to xdg-shell so that
the client can tell the compositor what would be its smallest/largest
acceptable size, and that the compositor can decide if maximize or
fullscreen is achievable, draw an accurate animation, etc.

Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=764413


Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Mike Blumenkrantz authored 9 years ago and Jonas Ådahl committed 8 years ago

this change ensures that the client will set its initial state
before performing any drawing, ensuring that there is no mismatch
when creating a surface with a non-default state
(eg. maximize, fullscreen, ...)

looking at the following event flows:
1) wl_surface.attach, wl_surface.commit, xdg_shell.get_xdg_surface

2) wl_surface.attach, xdg_shell.get_xdg_surface, wl_surface.commit

3) xdg_shell.get_xdg_surface, wl_surface.commit, xdg_surface.configure,
   wl_surface.attach, wl_surface.commit

only 3) is now valid, while 1) and 2) will trigger errors as a result
of handling buffers prior to creating the xdg surface

Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

As of version 6, the new unstable protocol discovery semantics are
used, so lets remove the enum and request that made up the old one.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>

This copies the version 5 of the XML to a new version 6 version, while
at the same time the interface names are changed to use the unstable
naming convention.

A whitespace cleanup was done as no git-blame:ability would be lost
anyway.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>

Bryce Harrington authored 8 years ago and Jonas Ådahl committed 8 years ago

This interface allows disabling of screensaver/screenblanking on a
per-surface basis.  As long as the surface remains visible and
non-occluded it blocks the screensaver, etc. from activating on the
output(s) that the surface is visible on.

To uninhibit, simply destroy the inhibitor object.

Signed-off-by: Bryce Harrington <bryce@bryceharrington.org>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

xdg-foreign is a protocol meant to enable setting up inter surface
relationships across clients. Potential use cases are out-of-process
dialogs, such as file dialogs, meant to be used by sandboxed processes
that may not have the access it needs to implement such dialogs.

It works by enabling a client to export a surface, creating a handle
for the exported surface. The handle, in form of a unique string, may
be shared in some way with other clients (for example the provider of
the file dialog) which can then import the exported surface.

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>

Carlos Garnacho authored 8 years ago and Jonas Ådahl committed 8 years ago

The pad's interface is similar to the tool interface, a client is notified of
the pad after the tablet_added event.

The pad has three functionalities: buttons, rings and strips.
Buttons are fairly straightforward, rings and strips are separate interfaces
with pointer-axis-like source/value/frame events.
The two interfaces are effectively identical but for the actual value they
send (degrees vs normalized position).

Buttons are sequentially indexed starting with zero, unlike other protocols
where a linux/input.h-style semantic event code is used. Since we expect all
buttons to have client-specific functionality, an additional event tells the
client when a given button index is not available, usually because the
compositor assignes some function to it (e.g. mode switching, see below).

Specific to the pad device is the set_feedback request which enables a client
to set a user-defined string to display for an OSD on the current mappings.
This request is available for buttons, rings and strips.

Finally, the pad supports groups, effectively sets of button/ring/strip
configurations. Those groups may have multiple modes each, so that
users/clients may map several actions to a single element.

Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Peter Hutterer authored 8 years ago and Jonas Ådahl committed 8 years ago

The initial approach was to allow one surface to be re-used between tools,
seats and even used together as wl_pointer cursor surface. This has a few
drawbacks, most of which are related to managing the surface correctly in the
compositor. For example, the same cursor surface could have two different
hotspots. Animated cursors should animate independently rather than update at
the same time.

Furthermore: a client cannot know when a surface will cease being used as a
cursor surface. The basic assumption of "after focus out" is an implementation
detail in the compositor and unless the client unsets the cursor it is not
guaranteed that the surface is released. This again makes sharing a surface
less obvious - you cannot know if the wl_pointer surface is still in use when
you set it for a new wp_tablet_tool.

Avoid these headaches (and push some of them to the client) by simply
restricting a wl_surface to be assigned to a single tool. For the 99% use case
where we have one tablet with two tools (pen + eraser) this means we merely
get two extra surfaces, and the two don't usually share the same cursor shape
anyway. If sharing is absolutely necessary, a client may still opt to share
the underlying wl_buffer.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Peter Hutterer authored 8 years ago and Jonas Ådahl committed 8 years ago

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Peter Hutterer authored 8 years ago and Jonas Ådahl committed 8 years ago

This is a straightforward copy/paste with a _v1 -> _v2 rename. No functional
changes otherwise.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Bryce Harrington authored 8 years ago and Bryce Harrington committed 8 years ago

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>

Signed-off-by: Jonas Ådahl <jadahl@gmail.com>

Rather than silenty doing things, make them explicit and error if
anything is not quite right. Suggested by Daniel Stone.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: updated copyright years]
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

Cc: Yong Bakos <ybakos@humanoriented.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: s/culled/ignored/]
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

Rename interfaces and the protocol to follow the policy.

Reset interface versions.

Replace "surface coordinates" with "surface local coordinates".

Hook up to build and install.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

Remove the old, redundant request. The new way is to call both
wp_viewport.set_source and wp_viewport.set_destination when you want to
set everything.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

This XML file has been copied verbatim from Weston 1.10.0 release,
protocol/scaler.xml.

The interfaces still need renaming according to wayland-protocols
policy. Also a redundant request needs to be removed. These will be done
in a follow-up patch to clearly show the changes.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>

Jussi Kukkonen authored 9 years ago and Pekka Paalanen committed 8 years ago

Check autoconfs $cross_compiling instead as AC_CANONICAL_HOST call
will fail if the host cpu is not recognised (which can happen when
e.g. Yocto builds for "allarch").

Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

In addition, simplify relevant x/y coordinate parameter summaries.

See https://lists.freedesktop.org/archives/wayland-devel/2016-April/028249.html

.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

See https://lists.freedesktop.org/archives/wayland-devel/2016-April/028249.html

.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Attempting to clarify the paragraph. The key points are that feedback is
double-buffered, part of a commit as all double-buffered state is, and
it defines the term "content update" used later.

The new phrasing defines not only a content update, but also content
submission which is used further on in the spec. It implies the
double-buffered state semantics without actually using the term (it's
not really state to be applied), and makes a link with the very next
paragraph describing the prensentation time.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Move compositor implementors' guidelines to the end. Recombine the
affected paragraphs.

No changes to the wording are made.

Suggested-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Suggested-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Associates better with the surrounding paragraphs by not jumping topics
back and forth.

Suggested-by: Bill Spitzak <spitzak@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Add missing periods that terminate sentences.
Correct ARBITRARY_MODE to match the actual enum value name.
Adjust one post-period space to match the rest of the content.
Downcase summary description to match the rest of the document.
Add line breaks between sequential enum elements to match conventions
in this, and other, protocol xml docs.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Adds one line between two sequential request elements, to match conventions
within this, and other, protocol xml docs.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Remove line breaks preceding closing interface tags, to match conventions
in this, and other, protocol xml docs.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Downcase the protocol summary description to match other protocols.
Replace 'surface-relative' with 'surface local' for consistency and clarity.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Adjust double-space after period to be consistent with all content.
Adjust vertical whitespace surrounding first and last protocol tag to
match conventions in this, and other, protocol xml docs.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Downcase the protocol description summary.
Adjust two double-spaces to one, like the rest of the content.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Yong Bakos authored 8 years ago and Bryce Harrington committed 8 years ago

Correcting minor grammar and punctuation affords clarity.
Standardize the use of 'surface local coordinates' in lieu of 'surface relative'.
Capitalize Wayland where appropriate, similar to other occurences.

Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>