- Aug 12, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick the changes in: 23a60f83 ("s390/kvm: diagnose 0x318 sync and reset") None of them trigger any changes in tooling, this time this is just to silence these perf build warnings: Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h' diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Collin Walling <walling@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- Aug 07, 2020
-
-
Athira Rajeev authored
Added support for supported regs which are new in power10 ( MMCR3, SIER2, SIER3 ) to sample_reg_mask in the tool side to use with `-I?` option. Also added PVR check to send extended mask for power10 at kernel while capturing extended regs in each sample. Signed-off-by:
Athira Jajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Reviewed-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by:
-
Anju T Sudhakar authored
Add extended regs to sample_reg_mask in the tool side to use with `-I?` option. Perf tools side uses extended mask to display the platform supported register names (with -I? option) to the user and also send this mask to the kernel to capture the extended registers in each sample. Hence decide the mask value based on the processor version. Currently definitions for `mfspr`, `SPRN_PVR` are part of `arch/powerpc/util/header.c`. Move this to a header file so that these definitions can be re-used in other source files as well. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed--by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 85b23fbc ("x86/cpufeatures: Add enumeration for SERIALIZE instruction") bd657aa3 ("x86/cpufeatures: Add Architectural LBRs feature bit") fbd5969d ("x86/cpufeatures: Mark two free bits in word 3") These should't cause any changes in tooling, it just gets rebuilt by including those headers: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o LD /tmp/build/perf/bench/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf And silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: d6a162a4 x86/msr-index: Add bunch of MSRs for Arch LBR ed7bde7a cpufreq: intel_pstate: Allow enable/disable energy efficiency 99e40204 (tip/x86/cleanups) x86/msr: Move the F15h MSRs where they belong 1068ed45 x86/msr: Lift AMD family 0x15 power-specific MSRs 5cde2653 (tag: perf-core-2020-06-01) perf/x86/rapl: Add AMD Fam17h RAPL support Addressing these tools/perf build warnings: That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-08-07 08:45:18.801298854 -0300 +++ after 2020-08-07 08:45:28.654456422 -0300 @@ -271,6 +271,8 @@ [0xc0010062 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_CTL", [0xc0010063 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_STATUS", [0xc0010064 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PSTATE_DEF_BASE", + [0xc001007a - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_PWR_ACCUMULATOR", + [0xc001007b - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_MAX_PWR_ACCUMULATOR", [0xc0010112 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_ADDR", [0xc0010113 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_MASK", [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR" ^C# # If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR" Using CPUID GenuineIntel-6-8E-A 0xc001007a 0xc001007b New filter for msr:read_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782) 0xc001007a 0xc001007b New filter for msr:write_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782) mmap size 528384B ^C# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by:
-
- Jul 30, 2020
-
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
- Jul 22, 2020
-
-
Athira Rajeev authored
Power ISA v3.1 has added new performance monitoring unit (PMU) special purpose registers (SPRs). They are: Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register A (SIER2) Sampled Instruction Event Register B (SIER3) Add support to save/restore these new SPRs while entering/exiting guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3. Add new SPRs to KVM API documentation. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
-
- Jul 17, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 83d31e52 ("KVM: nVMX: fixes for preemption timer migration") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
- Jul 03, 2020
-
-
Arnaldo Carvalho de Melo authored
To bring in the change made in this cset: e3a9e681 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
- Jun 22, 2020
-
-
Borislav Petkov authored
1068ed45 ("x86/msr: Lift AMD family 0x15 power-specific MSRs") moved the three F15h power MSRs to the architectural list but that was wrong as they belong in the family 0x15 list. That also caused: In file included from trace/beauty/tracepoints/x86_msr.c:10: perf/trace/beauty/generated/x86_arch_MSRs_array.c:292:45: error: initialized field overwritten [-Werror=override-init] 292 | [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", | ^~~~~~~~~~~ perf/trace/beauty/generated/x86_arch_MSRs_array.c:292:45: note: (near initialization for 'x86_AMD_V_KVM_MSRs[640]') due to MSR_F15H_PTSC ending up being defined twice. Move them where they belong and drop the duplicate. Also, drop the respective tools/ changes of the msr-index.h copy the above commit added because perf tool developers prefer to go through those changes themselves in order to figure out whether changes to the kernel headers would need additional handling in perf. Fixes: 1068ed45 ("x86/msr: Lift AMD family 0x15 power-specific MSRs") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
- Jun 17, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: 7e5b3c26 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation") Addressing these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" ^C# Using -v we can see how it sets up the tracepoint filters, converting from the string in the filter to the numeric value: # perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" Using CPUID GenuineIntel-6-8E-A 0x123 New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344) mmap size 528384B ^C# The updating process shows how this affects tooling in more detail: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300 +++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300 @@ -128,6 +128,10 @@ #define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */ #define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */ +/* SRBDS support */ +#define MSR_IA32_MCU_OPT_CTRL 0x00000123 +#define RNGDS_MITG_DIS BIT(0) + #define MSR_IA32_SYSENTER_CS 0x00000174 #define MSR_IA32_SYSENTER_ESP 0x00000175 #define MSR_IA32_SYSENTER_EIP 0x00000176 $ set -o vi $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-17 10:05:49.653114752 -0300 +++ after 2020-06-17 10:06:01.777258731 -0300 @@ -51,6 +51,7 @@ [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", [0x00000122] = "IA32_TSX_CTRL", + [0x00000123] = "IA32_MCU_OPT_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", $ The related change to cpu-features.h affects this: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o This shouldn't be affecting that 'perf bench' entry: $ find tools/perf/ -type f | xargs grep SRBDS $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Gross <mgross@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- Jun 15, 2020
-
-
Borislav Petkov authored
... into the global msr-index.h header because they're used in multiple compilation units. Sort the MSR list a bit. Update the msr-index.h copy in tools. No functional changes. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20200608164847.14232-1-bp@alien8.de
-
- Jun 09, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick the changes in: f97f5a56 ("x86/kvm/hyper-v: Add support for synthetic debugger interface") 850448f3 ("KVM: nVMX: Fix VMX preemption timer migration") 2c4c4132 ("KVM: x86: Print symbolic names of VMX VM-Exit flags in traces") cc440cda ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE") f7d31e65 ("x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit") 72de5fa4 ("KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT") acd05785 ("kvm: add capability for halt polling") 3ecad8c2 ("docs: fix broken references for ReST files that moved around") That do not result in any change in tooling, as the additions are not being used in any table generator. This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Matlack <dmatlack@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jon Doron <arilou@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Shier <pshier@google.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the change in: 700d3a5a ("x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"") That doesn't trigger any changes in tooling and silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/unistd.h' differs from latest version at 'arch/x86/include/uapi/asm/unistd.h' diff -u tools/arch/x86/include/uapi/asm/unistd.h arch/x86/include/uapi/asm/unistd.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- Jun 02, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: 5cde2653 ("perf/x86/rapl: Add AMD Fam17h RAPL support") Addressing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter="msr==AMD_PKG_ENERGY_STATUS || msr==AMD_RAPL_POWER_UNIT" Just like it is now possible with other MSRs: [root@five ~]# uname -a Linux five 5.5.17-200.fc31.x86_64 #1 SMP Mon Apr 13 15:29:42 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@five ~]# grep 'model name' -m1 /proc/cpuinfo model name : AMD Ryzen 5 3600X 6-Core Processor [root@five ~]# [root@five ~]# perf trace -e msr:*/max-stack=16/ --filter="msr==AMD_PERF_CTL" --max-events=2 0.000 kworker/1:1-ev/2327824 msr:write_msr(msr: AMD_PERF_CTL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) [0xffffffffc01d71c3] ([acpi_cpufreq]) [0] ([unknown]) __cpufreq_driver_target ([kernel.kallsyms]) od_dbs_update ([kernel.kallsyms]) dbs_work_handler ([kernel.kallsyms]) process_one_work ([kernel.kallsyms]) worker_thread ([kernel.kallsyms]) kthread ([kernel.kallsyms]) ret_from_fork ([kernel.kallsyms]) 8.597 kworker/2:2-ev/2338099 msr:write_msr(msr: AMD_PERF_CTL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) [0] ([unknown]) [0] ([unknown]) __cpufreq_driver_target ([kernel.kallsyms]) od_dbs_update ([kernel.kallsyms]) dbs_work_handler ([kernel.kallsyms]) process_one_work ([kernel.kallsyms]) worker_thread ([kernel.kallsyms]) kthread ([kernel.kallsyms]) ret_from_fork ([kernel.kallsyms]) [root@five ~]# Longer explanation with what happens in the perf build process, automatically after this is made in synch with the kernel sources: $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-02 10:46:36.217782288 -0300 +++ arch/x86/include/asm/msr-index.h 2020-05-28 10:41:23.313794627 -0300 @@ -301,6 +301,9 @@ #define MSR_PP1_ENERGY_STATUS 0x00000641 #define MSR_PP1_POLICY 0x00000642 +#define MSR_AMD_PKG_ENERGY_STATUS 0xc001029b +#define MSR_AMD_RAPL_POWER_UNIT 0xc0010299 + /* Config TDP MSRs */ #define MSR_CONFIG_TDP_NOMINAL 0x00000648 #define MSR_CONFIG_TDP_LEVEL_1 0x00000649 $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-02 10:47:08.486334348 -0300 +++ after 2020-06-02 10:47:33.075008948 -0300 @@ -286,6 +286,8 @@ [0xc0010240 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTL", [0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR", [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", + [0xc0010299 - x86_AMD_V_KVM_MSRs_offset] = "AMD_RAPL_POWER_UNIT", + [0xc001029b - x86_AMD_V_KVM_MSRs_offset] = "AMD_PKG_ENERGY_STATUS", [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
- Jun 01, 2020
-
-
Arnd Bergmann authored
sh5 never became a product and has probably never really worked. Remove it by recursively deleting all associated Kconfig options and all corresponding files. Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Rich Felker <dalias@libc.org>
-
Makarand Sonare authored
When a nested VM with a VMX-preemption timer is migrated, verify that the nested VM and its parent VM observe the VMX-preemption timer exit close to the original expiration deadline. Signed-off-by:
Makarand Sonare <makarandsonare@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20200526215107.205814-3-makarandsonare@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- May 26, 2020
-
-
Andy Lutomirski authored
Revert 45e29d11 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d11 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by:
Thorsten Glaser <t.glaser@tarent.de> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
- Apr 22, 2020
-
-
The SAVE/RESTORE hints are now unused; remove them. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Reviewed-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115118.926738768@infradead.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Normally objtool ensures a function keeps the stack layout invariant. But there is a useful exception, it is possible to stuff the return stack in order to 'inject' a 'call': push $fun ret In this case the invariant mentioned above is violated. Add an objtool HINT to annotate this and allow a function exit with a modified stack frame. Signed-off-by:
-
- Apr 14, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 077168e2 ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9 ("x86/split_lock: Enable split lock detection by kernel") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Wei Huang <wei.huang2@amd.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: 6650cdd9 ("x86/split_lock: Enable split lock detection by kernel") Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Which causes these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-04-01 12:11:14.789344795 -0300 +++ after 2020-04-01 12:11:56.907798879 -0300 @@ -10,6 +10,7 @@ [0x00000029] = "KNC_EVNTSEL1", [0x0000002a] = "IA32_EBL_CR_POWERON", [0x0000002c] = "EBC_FREQUENCY_ID", + [0x00000033] = "TEST_CTRL", [0x00000034] = "SMI_COUNT", [0x0000003a] = "IA32_FEAT_CTL", [0x0000003b] = "IA32_TSC_ADJUST", @@ -27,6 +28,7 @@ [0x000000c2] = "IA32_PERFCTR1", [0x000000cd] = "FSB_FREQ", [0x000000ce] = "PLATFORM_INFO", + [0x000000cf] = "IA32_CORE_CAPS", [0x000000e2] = "PKG_CST_CONFIG_CONTROL", [0x000000e7] = "IA32_MPERF", [0x000000e8] = "IA32_APERF", $ $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> Now one can do: perf trace -e msr:* --filter=msr==IA32_CORE_CAPS or: perf trace -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' And see only those MSRs being accessed via: # perf trace -v -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' New filter for msr:read_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:write_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:rdpmc: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20200401153325.GC12534@kernel.org/ Signed-off-by:
-
- Mar 27, 2020
-
-
Yu-cheng Yu authored
Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by:Yu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi v. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200204171425.28073-2-yu-cheng.yu@intel.com Signed-off-by:
-
- Mar 26, 2020
-
-
Yu-cheng Yu authored
Add the following CET instructions to the opcode map: INCSSP: Increment Shadow Stack pointer (SSP). RDSSP: Read SSP into a GPR. SAVEPREVSSP: Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK. RSTORSSP: Restore from a "restore token" to SSP. WRSS: Write to kernel-mode SHSTK (kernel-mode instruction). WRUSS: Write to user-mode SHSTK (kernel-mode instruction). SETSSBSY: Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP. CLRSSBSY: Verify the "supervisor token" and clear its busy bit. ENDBR64/ENDBR32: Mark a valid 64/32 bit control transfer endpoint. Detailed information of CET instructions can be found in Intel Software Developer's Manual. Signed-off-by:
-
- Mar 16, 2020
-
-
Ben Gardon authored
The demand paging test is currently a simple page access test which, while potentially useful, doesn't add much versus the existing dirty logging test. To improve the demand paging test, add a basic userfaultfd demand paging implementation. Signed-off-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
- Feb 27, 2020
-
-
Arnaldo Carvalho de Melo authored
Picking the changes from: 5ef8acbd ("KVM: nVMX: Emulate MTF when performing instruction emulation") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h No change in tooling ensues, just the x86 kvm tooling gets rebuilt as those headers are included in its build: $ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h $ make -C tools/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] <SNIP> ... disassembler-four-args: [ on ] DESCEND plugins CC /tmp/build/perf/arch/x86/util/kvm-stat.o <SNIP> LD /tmp/build/perf/arch/x86/util/perf-in.o LD /tmp/build/perf/arch/x86/perf-in.o LD /tmp/build/perf/arch/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> $ As it doesn't seem to be used there: $ grep STATE tools/perf/arch/x86/util/kvm-stat.c $ And the 'perf trace' beautifier table generator isn't interested in these things: $ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from these csets: 21b5ee59 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF") $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ git diff diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index ebe1685e92dd..d5e517d1c3dd 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -512,6 +512,8 @@ #define MSR_K7_HWCR 0xc0010015 #define MSR_K7_HWCR_SMMLOCK_BIT 0 #define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT) +#define MSR_K7_HWCR_IRPERF_EN_BIT 30 +#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT) #define MSR_K7_FID_VID_CTL 0xc0010041 #define MSR_K7_FID_VID_STATUS 0xc0010042 $ That don't result in any change in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ To silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- Feb 12, 2020
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 290a6bb0 ("arm64: KVM: Add UAPI notes for swapped registers") No tools changes are caused by this. This addresses these tools/perf build warnings: Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 85c17291 ("x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured") f444a5ff ("x86/cpufeatures: Add support for fast short REP; MOVSB") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To silence the following tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Picking up the changes in: 45fc24e8 ("x86/mpx: remove MPX from arch/x86") that didn't entail any functionality change in the tooling side. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- Feb 11, 2020
-
-
Arnaldo Carvalho de Melo authored
To get the changes in: 3e3c8ca5 ("arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers") Silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h' diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h Which will probably end up enabling the use of "clone3" in 'perf trace -e', haven't checked the build with this change on an arm64 system. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- Jan 22, 2020
-
-
Masami Hiramatsu authored
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does. Commit 12a78d43 ("x86/decoder: Add new TEST instruction pattern") added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did not add f7 XX/001/XXX (Group 3-2). Actually, this TEST opcode variant (ModRM.reg /1) is not described in the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3, Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map. Without this fix, Randy found a warning by insn_decoder_test related to this issue as below. HOSTCC arch/x86/tools/insn_decoder_test HOSTCC arch/x86/tools/insn_sanity TEST posttest arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx) arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2 arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures TEST posttest arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c) To fix this error, add the TEST opcode according to AMD64 APM Vol.3. [ bp: Massage commit message. ] Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- Jan 13, 2020
-
-
Sean Christopherson authored
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL MSR definitions. Update KVM's VMX selftest and turbostat accordingly. Keep the full name in turbostat's output to avoid breaking someone's workflow, e.g. if a script is looking for the full name. While using the renamed defines is by no means necessary, do the sync now to avoid leaving a landmine that will get stepped on the next time msr-index.h needs to be refreshed for some other reason. No functional change intended. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
- Jan 08, 2020
-
-
Xiaoyao Li authored
Rename interrupt-windown exiting related definitions to match the latest Intel SDM. No functional changes. Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
-
- Dec 02, 2019
-
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: a25bbc26 ("Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") db4d30fb ("x86/bugs: Add ITLB_MULTIHIT bug infrastructure") 1b42f017 ("x86/speculation/taa: Add mitigation for TSX Async Abort") 9d40b85b ("x86/cpufeatures: Add feature bit RDPRU on AMD") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Babu Moger <babu.moger@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Link: https://lkml.kernel.org/n/tip-yufg9yt2nbkh45r9xvxnnscq@git.kernel.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 14edff88 Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD a4b28f5c Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next 58772e9a ("KVM: arm64: Provide VCPU attributes for stolen time") da345174 ("KVM: arm/arm64: Allow user injection of external data aborts") c726200d ("KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace") efe5ddca ("KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs") No tools changes are caused by this, as the only defines so far used from these files are for syscall arg pretty printing are: $ grep KVM tools/perf/trace/beauty/*.sh tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Some are also include by: tools/perf/arch/x86/util/kvm-stat.c tools/perf/arch/powerpc/util/kvm-stat.c This addresses these tools/perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h' diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Fabiano Rosas <farosas@linux.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steven Price <steven.price@arm.com> Link: https://lkml.kernel.org/n/tip-qrjdudhq25mk5bfnhveofbm4@git.kernel.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from these csets: 3f3c8be9 Merge tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip 4e3f77d8 ("xen/mcelog: add PPIN to record when available") db4d30fb ("x86/bugs: Add ITLB_MULTIHIT bug infrastructure") 1b42f017 ("x86/speculation/taa: Add mitigation for TSX Async Abort") c2955f27 ("x86/msr: Add the IA32_TSX_CTRL MSR") These are the changes in tooling that this udpate ensues: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before $ $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2019-12-02 11:54:44.371035723 -0300 +++ /tmp/after 2019-12-02 11:55:31.847859784 -0300 @@ -48,6 +48,7 @@ [0x00000119] = "IA32_BBL_CR_CTL", [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", + [0x00000122] = "IA32_TSX_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", @@ -283,4 +284,6 @@ [0xc0010240 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTL", [0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR", [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", + [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", + [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", }; $ CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o Now it is possible to use these strings when setting up filters for the msr:* tracepoints, like: # perf trace -e msr:* --filter=msr==IA32_TSX_CTRL ^C[root@quaco ~]# If we use an invalid operator we can check what is the filter that is put in place: # perf trace -e msr:* --filter=msr=IA32_TSX_CTRL Failed to set filter "(msr=0x122) && (common_pid != 25976 && common_pid != 25860)" on event msr:read_msr with 22 (Invalid argument) One can as well use -v to see the tracepoints and its filters: # perf trace -v -e msr:* --filter=msr==IA32_TSX_CTRL Using CPUID GenuineIntel-6-8E-A New filter for msr:read_msr: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) New filter for msr:write_msr: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) New filter for msr:rdpmc: (msr==0x122) && (common_pid != 26110 && common_pid != 25860) mmap size 528384B ^C# Better than keep looking up those numbers, works with callchains as well, e.g. for something more common: # perf trace -e msr:*/max-stack=16/ --filter="msr==IA32_SPEC_CTRL" --max-events=2 0.000 SCTP timer/6158 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __sched_text_start ([kernel.kallsyms]) schedule ([kernel.kallsyms]) schedule_hrtimeout_range_clock ([kernel.kallsyms]) poll_schedule_timeout.constprop.0 ([kernel.kallsyms]) do_select ([kernel.kallsyms]) core_sys_select ([kernel.kallsyms]) kern_select ([kernel.kallsyms]) __x64_sys_select ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64 ([kernel.kallsyms]) __select (/usr/lib64/libc-2.29.so) [0] ([unknown]) 0.024 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __sched_text_start ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) start_secondary ([kernel.kallsyms]) [0x2000d4] ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Link: https://lkml.kernel.org/n/tip-n1xd78fpd5lxn4q1brqi2jl6@git.kernel.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
And update linux/linkage.h, which requires in turn that we make these files switch from ENTRY()/ENDPROC() to SYM_FUNC_START()/SYM_FUNC_END(): tools/perf/arch/arm64/tests/regs_load.S tools/perf/arch/arm/tests/regs_load.S tools/perf/arch/powerpc/tests/regs_load.S tools/perf/arch/x86/tests/regs_load.S We also need to switch SYM_FUNC_START_LOCAL() to SYM_FUNC_START() for the functions used directly by 'perf bench', and update tools/perf/check_headers.sh to ignore those changes when checking if the kernel original files drifted from the copies we carry. This is to get the changes from: 6dcc5627 ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*") ef1e0315 ("x86/asm: Make some functions local") e9b9d020 ("x86/asm: Annotate aliases") And address these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tay3l8x8k11p7y3qcpqh9qh5@git.kernel.org Signed-off-by:
-
- Nov 26, 2019
-
-
Adrian Hunter authored
Add to the opcode map the following instructions: v4fmaddps v4fmaddss v4fnmaddps v4fnmaddss vaesdec vaesdeclast vaesenc vaesenclast vcvtne2ps2bf16 vcvtneps2bf16 vdpbf16ps gf2p8affineinvqb vgf2p8affineinvqb gf2p8affineqb vgf2p8affineqb gf2p8mulb vgf2p8mulb vp2intersectd vp2intersectq vp4dpwssd vp4dpwssds vpclmulqdq vpcompressb vpcompressw vpdpbusd vpdpbusds vpdpwssd vpdpwssds vpexpandb vpexpandw vpopcntb vpopcntd vpopcntq vpopcntw vpshldd vpshldq vpshldvd vpshldvq vpshldvw vpshldw vpshrdd vpshrdq vpshrdvd vpshrdvq vpshrdvw vpshrdw vpshufbitqmb For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test e.g. $ perf test -v "new " 2>&1 | grep -i 'v4fmaddps' Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Signed-off-by:
-
- Nov 18, 2019
-
-
Adrian Hunter authored
Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by:Andi Kleen <ak@linux.intel.com> Acked-by:
-
