release: bump version to 1.23.95

!1315

Signed-off-by: Dan Williams <dan@ioncontrol.co>

Signed-off-by: Dan Williams <dan@ioncontrol.co>

port-probe: ensure port is open for all plugin AT probes

!1305

If multiple plugins are selected for probing a modem with AT probes,
earlier plugins may only request some probes but not all.  When
those probes complete successfully, subsequent plugins won't re-do
the probes that were already completed, but jump to ones that
haven't yet been done.

For example, plugin A may request only AT probes but plugin B
may request AT, AT_PRODUCT, and AT_VENDOR. Plugin B will start
with AT_PRODUCT probes because plugin A already completed the AT
probe.

The code in probe_step() only opened the serial port for the
AT probe, I guess assuming that all AT-type probes would be
done in sequence. But in the above scenario they are not.

Instead, make sure the port is opened for all AT style probes
that have not yet been executed.

Fixes: 7937a89a port-probe: rework and consolidate port probe flow for AT/QCDM/QMI/MBIM

Signed-off-by: Dan Williams <dan@ioncontrol.co>

fcc-unlock: Case-insensitive grep for for 105b (MBIM) and 14c3 (AT)

!1312

Signed-off-by: Jongmin Kim <jmkim@debian.org>

Signed-off-by: Jongmin Kim <jmkim@debian.org>

fcc-unlock: combine Quectel FCC unlock scripts and add support for RM520N

!1308

Signed-off-by: Jongmin Kim <jmkim@debian.org>

Add symlinks for new supported Quectel RM520N:

- RM520N (standard)       2c7c:0801
- RM520N (HP shipped)     1eac:1004
- RM520N (Lenovo shipped) 1eac:1007

Signed-off-by: Jongmin Kim <jmkim@debian.org>

Both scripts control MBIM ports and can be merged into a single script.

Signed-off-by: Jongmin Kim <jmkim@debian.org>

broadband-modem,cli: slightly bump 3GPP scan timeout; add some cli dbus timeout slack

!1307

Add some mmcli D-Bus timeout slack, making them slightly higher than the
ModemManager internal timeout, to ensure the cli doesn't time out the
D-Bus call when MM succeeds.

For 3GPP scan, some modems appear to have internal 5 minute timeouts,
so ensure MM doesn't time out right before the modem returns results:

ModemManager[282578]: <dbg> [1741054422.321400] [ttyUSB2/at] --> 'AT+COPS=?<CR>'
ModemManager[282578]: <wrn> [1741054722.247806] [modem1] failed scanning networks: Serial command timed out
ModemManager[282578]: <dbg> [1741054724.119770] [ttyUSB2/at] <-- '<CR><LF>+COPS: (1,"T-Mobile","T-Mobile","310260",0),,(0,1,2,3,4),(0,1,2)<CR><LF><CR><LF>OK<CR><LF>'

Signed-off-by: Dan Williams <dan@ioncontrol.co>

Fix some typos on the source code

!1309

Guido Günther authored 3 weeks ago and Dan Williams committed 2 weeks ago

All in debug messages or code comments so not user / client visible.

Signed-off-by: Guido Günther <agx@sigxcpu.org>

Guido Günther authored 3 weeks ago and Dan Williams committed 2 weeks ago

Signed-off-by: Guido Günther <agx@sigxcpu.org>

cli: Added bearer path print after successful modem connect

!1279

Anagh G authored 2 weeks ago and Dan Williams committed 2 weeks ago

For a ModemManager simple connect using mmcli, added the bearer
path on which call is connected. This helps in determining the
bearer path to directly retrieve bearer information easily
of this particular call.

Signed-off-by: Anagh G <quic_anaghg@quicinc.com>

ci: ensure DCO check exits with correct error code on failure

!1306

Signed-off-by: Dan Williams <dan@ioncontrol.co>

broadband-modem-qmi: implement UE mode get/set

!1302

Instead of relying on getting/setting the UE mode via AT +CEMODE command
which on Quectel RM520N (And I assume other QMI based modems) only allows
getting the value and not setting one it has special AT commands for CS/PS
and voice/data centric values.

So lets instead use the QMI Get/Set System Selection Preference TLV which
offers service domain and usage domain preference info so we can use those
to get/set the 3GPP TS 24.301 UE mode values.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

api,enums: added NGRAN-67 band

!1291

Slark Xiao authored 1 month ago and Dan Williams committed 3 weeks ago

According to 3GPP Rel17.2, TS 38104, band NGRAN-67 is supported.
Currently Qualcomm SDX72 chip support this band and MM would show
a '(null)' info in the "Bands" area.
Band info as below:
n67, 738MHz-758MHz, SDL

Signed-off-by: Slark Xiao <slark_xiao@163.com>

messaging: load default storage from modem during initialization

!1253

Akula Susmitha authored 5 months ago and Dan Williams committed 3 weeks ago

Signed-off-by: Akula Susmitha <quic_asusmith@quicinc.com>

ci: fix a couple DCO check issues

!1299

With the FDO CI templates, the first container used must
be .fdo.container-build@ubuntu which builds the actual
container the rest of the pipeline can use with
.fdo.distribution-image@ubuntu.

.fdo.container-build@ubuntu uses a static 'image:' tag for
its job base image and then pushes to the project registry.
If the first job incorrectly uses .fdo.distribution-image@ubuntu
instead, it appears to fail for MR branches because that target
uses CI_REGISTRY_USER as part of the 'image:' tag which gitlab
sets to the username of the submitter. Which of course fails
because that user has never built the image before...

Using Docker executor with image registry.freedesktop.org/<username>/modemmanager/ubuntu/20.04:2023-01-03.1 ...
Authenticating with credentials from job payload (GitLab Registry)
Pulling docker image registry.freedesktop.org/<username>/modemmanager/ubuntu/20.04:2023-01-03.1 ...

Signed-off-by: Dan Williams <dan@ioncontrol.co>

Only print out the specific commits that fail DCO.

Signed-off-by: Dan Williams <dan@ioncontrol.co>

iface-modem-firmware: report new ID's based on PCI SSVID/SSPID

!1297

Sushrut Shree Trivedi authored 4 weeks ago and Dan Williams committed 4 weeks ago

Add new device ID based on PCI SSVID/SSPID to enable
FW download based on the same.

Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@quicinc.com>

cli: fix Cell Broadcast Message short-path conflict with Call

!1296

Closes #962

Dan Williams authored 4 weeks ago and Dan Williams committed 4 weeks ago

They both used 'o', but Call had it first. Change CBM to 'c'.

Fixes: #962



Signed-off-by: Dan Williams <dan@ioncontrol.co>

ci: only run DCO check on merge requests

!1298

Signed-off-by: Dan Williams <dan@ioncontrol.co>

ci: add DCO check action

!1292

Check each commit in an MR for Signed-off-by: Name <email>

Signed-off-by: Dan Williams <dan@ioncontrol.co>

SIM7600 audio bug fix and sample rate change

!1293