Commit ac80a12f authored by Aleksander Morgado's avatar Aleksander Morgado
Browse files

blacklist: Pycom uses Microchip's vid, so blacklist also by pid

The Microchip VID is added to the USB serial adapters greylist
instead, as it is very generic.

https://bugs.freedesktop.org/show_bug.cgi?id=104320
(cherry picked from commit c2b956ae)
parent 16d2223f
......@@ -68,9 +68,6 @@ ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", ENV{ID_MM_DEVICE_IGNORE}="1"
# Atmel Corp at91sam SAMBA bootloader
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", ENV{ID_MM_DEVICE_IGNORE}="1"
# Dangerous Prototypes Bus Pirate v4
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb00", ENV{ID_MM_DEVICE_IGNORE}="1"
# All devices from the Swiss Federal Institute of Technology
ATTRS{idVendor}=="0617", ENV{ID_MM_DEVICE_IGNORE}="1"
......@@ -198,9 +195,12 @@ ATTRS{idVendor}=="0525", ATTRS{idProduct}=="a4a7", ENV{ID_MM_DEVICE_IGNORE}="1"
# Silicon Labs Telegesis ETRX USB Zigbee dongle
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="000f", ENV{ID_MM_DEVICE_IGNORE}="1"
# All devices from Pycom LTD
# Since Pycom is not producing any modems, it is safe to blacklist all
# Pycom LTD devices.
ATTRS{idVendor}=="04d8", ENV{ID_MM_DEVICE_IGNORE}="1"
# Devices using Microchip's VID
# Dangerous Prototypes Bus Pirate v4
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb00", ENV{ID_MM_DEVICE_IGNORE}="1"
# Pycom Pysense
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="f012", ENV{ID_MM_DEVICE_IGNORE}="1"
# Pycom Pytrack
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="f013", ENV{ID_MM_DEVICE_IGNORE}="1"
LABEL="mm_usb_device_blacklist_end"
......@@ -13,6 +13,9 @@ ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0103", ENV{ID_MM_DEVICE_MANUAL_SCAN_
# on the vendor Id.
ATTRS{idVendor}=="0403", ENV{ID_MM_DEVICE_MANUAL_SCAN_ONLY}="1"
# Devices using Microchip's VID
ATTRS{idVendor}=="04d8", ENV{ID_MM_DEVICE_MANUAL_SCAN_ONLY}="1"
# ATEN Intl UC-232A (Prolific)
ATTRS{idVendor}=="0557", ATTRS{idProduct}=="2008", ENV{ID_MM_DEVICE_MANUAL_SCAN_ONLY}="1"
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment