-
gpio-v4.20-210547d95 · ·
GPIO fixes for the v4.20 series: - Do not lose an IDA on the gpiochip register errorpath. - Fix the PXA non-pincontrol GPIO-using platforms. - Fix the direction on the mockup GPIO driver. - Add some MAINTAINERS stuff: Bartosz stepped up as GPIO co-maintainer, and Andy established an Intel git tree.
-
-
gpio-v4.20-140f5ff4f · ·
This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver.
-
gpio-v4.19-43e779a2e · ·
GPIO fix for the v4.19 series: - Fix up the interrupt parent for the irqdomains.
-
gpio-v4.19-319a4fbff · ·
A single GPIO fix: Free the last used descriptor, an off by one error. This is tagged for stable as well.
-
-
uvcg-201809253fb2fd76 · ·
UVC gadget updates for v4.20 - configfs cleanups, fixes and extensions - Endianness fixes - Miscellaneous cleanups
-
gpio-v4.19-2d49b48f0 · ·
GPIO fixes for the v4.19 cycle: - Atomic contexts, cansleep* calls and such fastpath/slopwpath things. - Defer ACPI event handler registration to late_initcall() so IRQs do not fire in our face before other drivers have a chance to register handlers. - Race condition if a consumer requests a GPIO after gpiochip_add_data_with_key() but before of_gpiochip_add() - Probe errorpath in the dwapb driver.
-
gpio-v4.19-1a5ec96dd · ·
This is the bulk of GPIO changes for the v4.19 kernel cycle: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers.
-
drm-intel-next-fixes-2018-08-063237c0db · ·
- Fix gvt compilation broken on a silent conflict on fixes vs next merge - Fix runtime PM for LPE audio - Revert on ICL workaround - Interactive RPS mode - Fix for PSR sink status report
-
gpio-v4.18-3ca876c74 · ·
GPIO fixes for v4.18: This is a single fix affecting X86 ACPI, and as such pretty important. It is going to stable as well and have all the high-notch x86 platform developers agreeing on it.