-
-
-
gpio-v3.19-2170680ab · ·
This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially. - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously. - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace. - New driver and device tree bindings for 74xx ICs. - New driver and device tree bindings for the VF610 Vybrid. - Support the RCAR r8a7793 and r8a7794. - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties. - Suspend/resume support for the MVEBU driver. - A slew of minor fixes and improvements.
-
-
-
gpio-v3.19-1256965d7 · ·
This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially. - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously. - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace. - New driver and device tree bindings for 74xx ICs. - New driver and device tree bindings for the VF610 Vybrid. - Support the RCAR r8a7793 and r8a7794. - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties. - Suspend/resume support for the MVEBU driver. - A slew of minor fixes and improvements.
-
drm-intel-next-2014-12-0593dc1b65 · ·
- dual-dsi enabling from Gaurav with prep work from Jani - reshuffling the ring init code to move towards a clean sw/hw state setup split - ring free space refactoring from Dave Gordon - s/seqno/request/ rework from John Harrison - psr support for vlv/chv from Rodrigo - skl mmio flip support from Damien - and the usual bits&pieces all over
-
-
-
-
-
-
sunxi-clocks-for-3.19c1ec5160 · ·
Allwinner Clocks additions for 3.19 A few patches that should go through the clock tree, mostly fixes, cleanups, and new clocks additions to start to support the A80.
-
sunxi-dt-for-3.19-bis109588fd · ·
Allwinner Device Tree Changes for 3.19 A lot of things happened during that merge window, but mostly: - Preliminary Support for the A80 - New Boards Support + Mele M3 + Banana Pi + Optimus + OLinuXino Lime2 - Device Tree Relicensing to GPLv2/X11 dual license
-
sunxi-simplefb-for-3.19a9f8cda3 · ·
Allwinner simple frambuffer support This enables the simple framebuffer on all the supported Allwinner SoCs (but the A80). That allows to have at last a video display usable by using the framebuffer the firmware might have set up.
-
drm-intel-next-2014-11-21e7f1d0b7 · ·
- infoframe tracking (for fastboot) from Jesse - start of the dri1/ums support removal - vlv forcewake timeout fixes (Imre) - bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom O'Rourke) - on-demand pinning for execlist contexts - vlv/chv backlight improvements (Ville) - gen8+ render ctx w/a work from various people - skl edp programming (Satheeshakrishna et al.) - psr docbook (Rodrigo) - piles of little fixes and improvements all over, as usual
-
sunxi-core-for-3.1902c24f7d · ·
Allwinner Core Additions for 3.19 This has mostly been about introducing A80 support
-
sunxi-dt-for-3.192f28e337 · ·
Allwinner Device Tree Changes for 3.19 A lot of things happened during that merge window, but mostly: - Preliminary Support for the A80 - New Boards Support + Mele M3 + Banana Pi + Optimus + OLinuXino Lime2 - Device Tree Relicensing to GPLv2/X11 dual license