media: uvcvideo: Require entities to have a non-zero unique ID
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
So, deny allocating an entity with ID 0 or an ID that belongs to a unit that is already added to the list of entities.
This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737]
Cc: stable@vger.kernel.org Reported-by: syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675 Reported-by: syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b Fixes: a3fbc2e6 ("media: mc-entity.c: use WARN_ON, validate link pads") Signed-off-by: Thadeu Lima de Souza Cascardo cascardo@igalia.com Reviewed-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Link: https://lore.kernel.org/r/20240913180601.1400596-2-cascardo@igalia.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl