Calibration failed 04f3:0903
I just installed fprintd, and wanted to enroll a fingerprint, but it is giving me an error.
This is the device:
Couldn't open device, some information will be missing
Bus 003 Device 004: ID 04f3:0903 Elan Microelectronics Corp. ELAN:Fingerprint
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04f3 Elan Microelectronics Corp.
idProduct 0x0903
bcdDevice 1.70
iManufacturer 1 ELAN
iProduct 2 ELAN:Fingerprint
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003e
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 09 21 10 01 00 01 22 15 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
When I run fprintd-enroll, it waits for me to roll my finger, when I do it it gives me an error:
Using device /net/reactivated/Fprint/Device/0
Enrolling right-index-finger finger.
Enroll result: enroll-stage-passed
Enroll result: enroll-unknown-error
Logs from journalctl:
Dec 29 11:03:07 gregasus systemd[1]: Starting Fingerprint Authentication Daemon...
Dec 29 11:03:07 gregasus systemd[1]: Started Fingerprint Authentication Daemon.
Dec 29 11:03:28 gregasus fprintd[658]: Failed to clear storage before first enrollment: Device has no storage.
Dec 29 11:03:32 gregasus fprintd[658]: Device reported an error during enroll: Calibration failed!
Dec 29 11:04:17 gregasus systemd[1]: fprintd.service: Deactivated successfully.