igt@kms_vrr@flip-suspend@pipe-a-edp-1 - abort - This test caused an abort condition: Ping host did not respond to ping, network down

https://gfx-ci.igk.intel.com/cibuglog-ng/testresult/1811413357?query_key=61226739b47fe4f470a1986f35d92c21ff205a72

Stdout	
Using IGT_SRANDOM=1718173822 for randomisation
Opened device: /dev/dri/card0
Starting subtest: flip-suspend
Default Mode:   2880x1800 60 2880 2928 2960 3040 1800 1803 1809 1906 0xa 0x48 347710
Starting dynamic subtest: pipe-A-eDP-1
VRR Test execution on eDP-1, PIPE_A with VRR range: (40-60) Hz
Override Mode:   2880x1800 60 2880 2928 2960 3040 1800 1803 1809 1906 0xa 0x48 347710
Requested rate[0]: 20000000 ns, Expected rate between: 19607844 ns to 20408164 ns
Completed 14 flips, 8 were in threshold for [(50 Hz) 20000000ns]
[cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Wed Jun 12 06:30:39 2024
Requested rate[0]: 20000000 ns, Expected rate between: 19607844 ns to 20408164 ns
Completed 251 flips, 243 were in threshold for [(50 Hz) 20000000ns]
Requested rate[0]: 20000000 ns, Expected rate between: 19607844 ns to 20408164 ns
Completed 251 flips, 0 were in threshold for [(50 Hz) 20000000ns]
Dynamic subtest pipe-A-eDP-1: SUCCESS (14.938s)
Subtest flip-suspend: SUCCESS (15.277s)



This test caused an abort condition: Ping host did not respond to ping, network down

Stderr	
Starting subtest: flip-suspend
Starting dynamic subtest: pipe-A-eDP-1
Dynamic subtest pipe-A-eDP-1: SUCCESS (14.938s)
Subtest flip-suspend: SUCCESS (15.277s)

Dmesg	
<6> [311.029177] Console: switching to colour dummy device 80x25
<6> [311.029417] [IGT] kms_vrr: executing
<7> [311.048946] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7> [311.048974] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7> [311.049134] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7> [311.049214] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7> [311.049584] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7> [311.049596] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7> [311.050312] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [311.050399] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [311.050462] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [311.050522] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [311.050612] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7> [311.050656] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.050675] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.050676] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.050692] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.050693] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [311.050713] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.050729] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.050731] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] ELD monitor 
<7> [311.050750] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.050765] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.050766] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<7> [311.050784] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.050798] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.050821] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7> [311.050898] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [311.051994] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [311.052069] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [311.052566] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.052588] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.052589] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.052604] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.052605] [drm:__displayid_iter_next [drm]] base revision 0x13, length 121, 0 0
<5> [311.052618] [drm] DisplayID checksum invalid, remainder is 248
<7> [311.052642] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7> [311.052652] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [311.052673] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7> [311.052682] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7> [311.052786] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [311.055580] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 14 82 00 01 15 01 01 00 00 00 00 00 00 00
<7> [311.061823] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:198:DP-1][ENCODER:197:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 02 00 01 03
<7> [311.065060] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:198:DP-1][ENCODER:197:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [311.066286] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 14 82 00 01 15 01 01 00 00 00 00 00 00 00
<7> [311.067395] xe 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 00-00-00 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [311.069304] xe 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 0b 78 00 00
<7> [311.070092] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:197:DDI TC1/PHY TC1] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [311.071830] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000, 2000000
<7> [311.071932] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [311.071999] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [311.089974] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [311.090015] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] No deep color support on this HDMI sink.
<7> [311.090033] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] CEA VCDB 0x6a
<7> [311.090050] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] ELD monitor LG ULTRAFINE
<7> [311.090064] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [311.090076] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:198:DP-1] ELD size 36, SAD count 1
<7> [311.090116] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:198:DP-1] VRR capable: no
<7> [311.090215] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:198:DP-1] DFP max bpc 8, max dotclock 0, TMDS clock 25000-300000, PCON Max FRL BW 0Gbps
<7> [311.091400] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [311.091504] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:198:DP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [311.092715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] probed modes:
<7> [311.092733] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x48 0x5
<7> [311.092743] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [311.092753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [311.092762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [311.092770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [311.092778] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [311.092786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0x9
<7> [311.092792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [311.092798] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [311.092803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "1920x1080": 60 138500 1920 1962 2000 2080 1080 1083 1088 1111 0x40 0x9

added feature: display/Other platform: LNL labels

The CI Bug Log issue associated to this bug has been updated by adelaryb.

New filters associated

• LNL: igt@kms_vrr@flip-suspend@pipe-a-edp-1 - abort - This test caused an abort condition: Ping host did not respond to ping, network down
  • https://intel-gfx-ci.01.org/tree/intel-xe/xe-1213-3ac3efef3a1fc9d494b0a63c78bd0039a0b3d009/re-lnl-8/igt@kms_vrr@flip-suspend@pipe-a-edp-1.html
  • https://intel-gfx-ci.01.org/tree/intel-xe/xe-1330-b912a794bf8a370cde8be56c138f5c82de0dde8f/re-lnl-3/igt@kms_vrr@flip-suspend@pipe-a-edp-1.html
  • https://intel-gfx-ci.01.org/tree/intel-xe/xe-1446-1340288da1f2a87e92a52d4e86a7247e4687bd62/re-lnl-8/igt@kms_vrr@flip-suspend@pipe-a-edp-1.html

marked this issue as a duplicate of #2023 (closed)

closed

marked this issue as related to #2023 (closed)

The CI Bug Log issue associated to this bug has been archived.

New failures matching the above filters will not be associated to this bug anymore.