- Dec 14, 2024
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20241212144311.432886635@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luiz Augusto von Dentz authored
commit 7967dc8f upstream. Since 61a939c6 ("Bluetooth: Queue incoming ACL data until BT_CONNECTED state is reached") there is no long the need to call mgmt_device_connected as ACL data will be queued until BT_CONNECTED state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458 Link: https://github.com/bluez/bluez/issues/1014 Fixes: 333b4fd1 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Karsten Graul authored
commit 49b7d376 upstream. Child sockets may inherit the af_ops from the parent listen socket. When the listen socket is released then the af_ops of the child socket points to released memory. Solve that by restoring the original af_ops for child sockets which inherited the parent af_ops. And clear any inherited user_data of the parent socket. Fixes: 8270d9c2 ("net/smc: Limit backlog connections") Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ameer Hamza authored
commit 8403fdd7 upstream. The venus_helper_alloc_dpb_bufs() implementation allows an early return on an error path when checking the id from ida_alloc_min() which would not release the earlier buffer allocation. Move the direct kfree() from the error checking of dma_alloc_attrs() to the common fail path to ensure that allocations are released on all error paths in this function. Addresses-Coverity: 1494120 ("Resource leak") cc: stable@vger.kernel.org # 5.16+ Fixes: 40d87aaf ("media: venus: vdec: decoded picture buffer handling during reconfig sequence") Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit b5a23a60 upstream. When CONFIG_DMA_ENGINE is disabled, the driver now fails to build: drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx': drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma' 1822 | if (uap->using_rx_dma) { | ^~ drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr' 1823 | uap->dmacr |= UART011_RXDMAE; | ^~ drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr' 1824 | pl011_write(uap->dmacr, uap, REG_DMACR); | ^~ Add the missing #ifdef check around these field accesses, matching what other parts of this driver do. Fixes: 2bcacc1c ("serial: amba-pl011: Fix RX stall when DMA is used") Cc: stable <stable@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 73dae652 upstream. Split resume into a 3rd step to handle displays when DCC is enabled on DCN 4.0.1. Move display after the buffer funcs have been re-enabled so that the GPU will do the move and properly set the DCC metadata for DCN. v2: fix fence irq resume ordering Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wayne Lin authored
commit ad28d7c3 upstream. [Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Guocai He <guocai.he.cn@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tristram Ha authored
commit 4bdf79d6 upstream. The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jörg Sommer <joerg@jo-so.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luiz Augusto von Dentz authored
commit 333b4fd1 upstream. [Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported-by: <syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com> Tested-by: <syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=c12e2f941af1feb5632c Fixes: 7b064eda ("Bluetooth: Fix authentication if acl data comes before remote feature evt") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com> Signed-off-by: Guocai He <guocai.he.cn@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rutland authored
commit 8c462d56 upstream. SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID (AKA "FID") to indicate that it is acceptable for the SMCCC implementation to discard SVE and/or SME state over a specific SMCCC call. The kernel support for using this hint is broken and SMCCC calls may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD state is unaffected. The kernel support is intended to use the hint when there is no SVE or SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE is set or TIF_SVE is clear in assembly code: | ldr <flags>, [<current_task>, #TSK_TI_FLAGS] | tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state? | tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE? | | 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT | 2: | << SMCCC call using FID >> This is not safe as-is: (1) SMCCC calls can be made in a preemptible context and preemption can result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no guarantee. (2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in the CPU does not belong to the current task, and does not indicate that clobbering this state is acceptable. When the live CPU state is clobbered it is necessary to update fpsimd_last_state.st to ensure that a subsequent context switch will reload FP/SVE/SME state from memory rather than consuming the clobbered state. This and the SMCCC call itself must happen in a critical section with preemption disabled to avoid races. (3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only TIF_SME set), and checking TIF_SVE alone is insufficient. Remove the broken support for the SMCCCv1.3 SVE saving hint. This is effectively a revert of commits: * cfa7ff95 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint") * a7c3acca ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()") ... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT definitions, since these are simply definitions from the SMCCC specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS. If we want to bring this back in future, we'll probably want to handle this logic in C where we can use all the usual FPSIMD/SVE/SME helper functions, and that'll likely require some rework of the SMCCC code and/or its callers. Fixes: cfa7ff95 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> [ Mark: fix conflicts in <linux/arm-smccc.h> and drivers/firmware/smccc/smccc.c ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 751ecf6a upstream. The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. Fixes: cccb78ce ("arm64/sve: Rework SVE access trap to convert state in registers") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ziwei Xiao authored
commit 278a370c upstream. Netpoll will explicilty pass the polling call with a budget of 0 to indicate it's clearing the Tx path only. For the gve_rx_poll and gve_xdp_poll, they were mistakenly taking the 0 budget as the indication to do all the work. Add check to avoid the rx path and xdp path being called when budget is 0. And also avoid napi_complete_done being called when budget is 0 for netpoll. Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit a7d6840b upstream. The MODE SELECT(6) command allows handling mode page buffers that are up to 255 bytes, including the 4 byte header needed in front of the page buffer. For requests larger than this limit, automatically use the MODE SELECT(10) command. In both cases, since scsi_mode_select() adds the mode select page header, checks on the buffer length value must include this header size to avoid overflows of the command CDB allocation length field. While at it, use put_unaligned_be16() for setting the header block descriptor length and CDB allocation length when using MODE SELECT(10). [mkp: fix MODE SENSE vs. MODE SELECT confusion] Link: https://lore.kernel.org/r/20210820070255.682775-3-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Zekun authored
This reverts commit aaf6160a. The origin mainline patch fix a buffer overflow issue in amdgpu_debugfs_gprwave_read(), but it has not been introduced in kernel 6.1 and older kernels. This patch add a check in a wrong function in the same file. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willem de Bruijn authored
commit dd89a81d upstream. Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 27013661 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks"). Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Libo Chen <libo.chen.cn@windriver.com>
-
Stefan Berger authored
commit be84f32b upstream. ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead. Link: https://lore.kernel.org/all/20240202182732.GE2087318@ZenIV/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Libo Chen <libo.chen.cn@windriver.com>
-
Weili Qian authored
commit b04f06fc upstream. The master ooo cannot be completely closed when the accelerator core reports memory error. Therefore, the driver needs to inject the qm error to close the master ooo. Currently, the qm error is injected after stopping queue, memory may be released immediately after stopping queue, causing the device to access the released memory. Therefore, error is injected to close master ooo before stopping queue to ensure that the device does not access the released memory. Fixes: 6c6dd580 ("crypto: hisilicon/qm - add controller reset interface") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Libo Chen <libo.chen.cn@windriver.com>
-
Heming Zhao authored
This reverts commit dfe6c569 ("ocfs2: fix the la space leak when unmounting an ocfs2 volume"). In commit dfe6c569, the commit log "This bug has existed since the initial OCFS2 code." is wrong. The correct introduction commit is 30dd3478 ("ocfs2: correctly use ocfs2_find_next_zero_bit()"). The influence of commit dfe6c569 is that it provides a correct fix for the latest kernel. however, it shouldn't be pushed to stable branches. Let's use this commit to revert all branches that include dfe6c569 and use a new fix method to fix commit 30dd3478. Fixes: dfe6c569 ("ocfs2: fix the la space leak when unmounting an ocfs2 volume") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Hung authored
commit 8b0ddf19 upstream. BIOS images may fail to load and null checks are added before they are used. This fixes 6 NULL_RETURNS issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy-ld Lu authored
commit 29122045 upstream. In the probe function, it goes to 'release_mem' label and returns after some procedure failure. But if the clocks (partial or all) have been enabled previously, they would not be disabled in msdc_runtime_suspend, since runtime PM is not yet enabled for this case. That cause mmc related clocks always on during system suspend and block suspend flow. Below log is from a SDCard issue of MT8196 chromebook, it returns -ETIMEOUT while polling clock stable in the msdc_ungate_clock() and probe failed, but the enabled clocks could not be disabled anyway. [ 129.059253] clk_chk_dev_pm_suspend() [ 129.350119] suspend warning: msdcpll is on [ 129.354494] [ck_msdc30_1_sel : enabled, 1, 1, 191999939, ck_msdcpll_d2] [ 129.362787] [ck_msdcpll_d2 : enabled, 1, 1, 191999939, msdcpll] [ 129.371041] [ck_msdc30_1_ck : enabled, 1, 1, 191999939, ck_msdc30_1_sel] [ 129.379295] [msdcpll : enabled, 1, 1, 383999878, clk26m] Add a new 'release_clk' label and reorder the error handle functions to make sure the clocks be disabled after probe failure. Fixes: ffaea6eb ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") Fixes: 7a2fa8ee ("mmc: mtk-sd: use devm_mmc_alloc_host") Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable@vger.kernel.org Message-ID: <20241107121215.5201-1-andy-ld.lu@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 9044ad57 upstream. Don't flush all pending DbC data requests when an endpoint halts. An endpoint may halt and xHC DbC triggers a STALL error event if there's an issue with a bulk data transfer. The transfer should restart once xHC DbC receives a ClearFeature(ENDPOINT_HALT) request from the host. Once xHC DbC restarts it will start from the TRB pointed to by dequeue field in the endpoint context, which might be the same TRB we got the STALL event for. Turn the TRB to a no-op in this case to make sure xHC DbC doesn't reuse and tries to retransmit this same TRB after we already handled it, and gave its corresponding data request back. Other STALL events might be completely bogus. Lukasz Bartosik discovered that xHC DbC might issue spurious STALL events if hosts sends a ClearFeature(ENDPOINT_HALT) request to non-halted endpoints even without any active bulk transfers. Assume STALL event is spurious if it reports 0 bytes transferred, and the endpoint stopped on the STALLED TRB. Don't give back the data request corresponding to the TRB in this case. The halted status is per endpoint. Track it with a per endpoint flag instead of the driver invented DbC wide DS_STALLED state. DbC remains in DbC-Configured state even if endpoints halt. There is no Stalled state in the DbC Port state Machine (xhci section 7.6.6) Reported-by: Łukasz Bartosik <ukaszb@chromium.org> Closes: https://lore.kernel.org/linux-usb/20240725074857.623299-1-ukaszb@chromium.org/ Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240905143300.1959279-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheng Yejian authored
commit f3c7a1ed upstream. Patch series "mm/damon/vaddr: Fix issue in damon_va_evenly_split_region()". v2. According to the logic of damon_va_evenly_split_region(), currently following split case would not meet the expectation: Suppose DAMON_MIN_REGION=0x1000, Case: Split [0x0, 0x3000) into 2 pieces, then the result would be acutually 3 regions: [0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000) but NOT the expected 2 regions: [0x0, 0x1000), [0x1000, 0x3000) !!! The root cause is that when calculating size of each split piece in damon_va_evenly_split_region(): `sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);` both the dividing and the ALIGN_DOWN may cause loss of precision, then each time split one piece of size 'sz_piece' from origin 'start' to 'end' would cause more pieces are split out than expected!!! To fix it, count for each piece split and make sure no more than 'nr_pieces'. In addition, add above case into damon_test_split_evenly(). And add 'nr_piece == 1' check in damon_va_evenly_split_region() for better code readability and add a corresponding kunit testcase. This patch (of 2): According to the logic of damon_va_evenly_split_region(), currently following split case would not meet the expectation: Suppose DAMON_MIN_REGION=0x1000, Case: Split [0x0, 0x3000) into 2 pieces, then the result would be acutually 3 regions: [0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000) but NOT the expected 2 regions: [0x0, 0x1000), [0x1000, 0x3000) !!! The root cause is that when calculating size of each split piece in damon_va_evenly_split_region(): `sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);` both the dividing and the ALIGN_DOWN may cause loss of precision, then each time split one piece of size 'sz_piece' from origin 'start' to 'end' would cause more pieces are split out than expected!!! To fix it, count for each piece split and make sure no more than 'nr_pieces'. In addition, add above case into damon_test_split_evenly(). After this patch, damon-operations test passed: # ./tools/testing/kunit/kunit.py run damon-operations [...] ============== damon-operations (6 subtests) =============== [PASSED] damon_test_three_regions_in_vmas [PASSED] damon_test_apply_three_regions1 [PASSED] damon_test_apply_three_regions2 [PASSED] damon_test_apply_three_regions3 [PASSED] damon_test_apply_three_regions4 [PASSED] damon_test_split_evenly ================ [PASSED] damon-operations ================= Link: https://lkml.kernel.org/r/20241022083927.3592237-1-zhengyejian@huaweicloud.com Link: https://lkml.kernel.org/r/20241022083927.3592237-2-zhengyejian@huaweicloud.com Fixes: 3f49584b ("mm/damon: implement primitives for the virtual memory address spaces") Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Ye Weihua <yeweihua4@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
SeongJae Park authored
commit 044cd975 upstream. On some configuration[1], 'damon_test_split_evenly()' kunit test function has >1024 bytes frame size, so below build warning is triggered: CC mm/damon/vaddr.o In file included from mm/damon/vaddr.c:672: mm/damon/vaddr-test.h: In function 'damon_test_split_evenly': mm/damon/vaddr-test.h:309:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 309 | } | ^ This commit fixes the warning by separating the common logic in the function. [1] https://lore.kernel.org/linux-mm/202111182146.OV3C4uGr-lkp@intel.com/ Link: https://lkml.kernel.org/r/20211201150440.1088-6-sj@kernel.org Fixes: 17ccae8b ("mm/damon: add kunit tests") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Weinberger authored
commit b29bf711 upstream. The fix for a memory corruption contained a off-by-one error and caused the compressor to fail in legit cases. Cc: Kinsey Moore <kinsey.moore@oarcorp.com> Cc: stable@vger.kernel.org Fixes: fe051552 ("jffs2: Prevent rtime decompress memory corruption") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kinsey Moore authored
commit fe051552 upstream. The rtime decompression routine does not fully check bounds during the entirety of the decompression pass and can corrupt memory outside the decompression buffer if the compressed data is corrupted. This adds the required check to prevent this failure mode. Cc: stable@vger.kernel.org Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kunkun Jiang authored
commit 7602ffd1 upstream. When DISCARD frees an ITE, it does not invalidate the corresponding ITE. In the scenario of continuous saves and restores, there may be a situation where an ITE is not saved but is restored. This is unreasonable and may cause restore to fail. This patch clears the corresponding ITE when DISCARD frees an ITE. Cc: stable@vger.kernel.org Fixes: eff484e0 ("KVM: arm64: vgic-its: ITT save and restore") Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> [Jing: Update with entry write helper] Signed-off-by: Jing Zhang <jingzhangos@google.com> Link: https://lore.kernel.org/r/20241107214137.428439-6-jingzhangos@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kunkun Jiang authored
commit e9649129 upstream. vgic_its_save_device_tables will traverse its->device_list to save DTE for each device. vgic_its_restore_device_tables will traverse each entry of device table and check if it is valid. Restore if valid. But when MAPD unmaps a device, it does not invalidate the corresponding DTE. In the scenario of continuous saves and restores, there may be a situation where a device's DTE is not saved but is restored. This is unreasonable and may cause restore to fail. This patch clears the corresponding DTE when MAPD unmaps a device. Cc: stable@vger.kernel.org Fixes: 57a9a117 ("KVM: arm64: vgic-its: Device table save/restore") Co-developed-by: Shusen Li <lishusen2@huawei.com> Signed-off-by: Shusen Li <lishusen2@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> [Jing: Update with entry write helper] Signed-off-by: Jing Zhang <jingzhangos@google.com> Link: https://lore.kernel.org/r/20241107214137.428439-5-jingzhangos@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jing Zhang authored
commit 7fe28d7e upstream. In all the vgic_its_save_*() functinos, they do not check whether the data length is 8 bytes before calling vgic_write_guest_lock. This patch adds the check. To prevent the kernel from being blown up when the fault occurs, KVM_BUG_ON() is used. And the other BUG_ON()s are replaced together. Cc: stable@vger.kernel.org Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> [Jing: Update with the new entry read/write helpers] Signed-off-by: Jing Zhang <jingzhangos@google.com> Link: https://lore.kernel.org/r/20241107214137.428439-4-jingzhangos@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 231825b2 upstream. This reverts commit 5c26d2f1. It turns out that we can't do this, because while the old behavior of ignoring ignorable code points was most definitely wrong, we have case-folding filesystems with on-disk hash values with that wrong behavior. So now you can't look up those names, because they hash to something different. Of course, it's also entirely possible that in the meantime people have created *new* files with the new ("more correct") case folding logic, and reverting will just make other things break. The correct solution is to not do case folding in filesystems, but sadly, people seem to never really understand that. People still see it as a feature, not a bug. Reported-by: Qi Han <hanqi@vivo.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586 Cc: Gabriel Krisman Bertazi <krisman@suse.de> Requested-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu (Google) authored
[ Upstream commit 494b3320 ] Fix eprobe event to unregister event call and release eprobe when it fails to add dynamic event correctly. Link: https://lore.kernel.org/all/173289886698.73724.1959899350183686006.stgit@devnote2/ Fixes: 7491e2c4 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Filipe Manana authored
[ Upstream commit 9c803c47 ] When activating a swap file we acquire the root's snapshot drew lock and then check if the root is dead, failing and returning with -EPERM if it's dead but without unlocking the root's snapshot lock. Fix this by adding the missing unlock. Fixes: 60021bd7 ("btrfs: prevent subvol with swapfile from being deleted") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
K Prateek Nayak authored
[ Upstream commit e932c4ab ] Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on from the IPI handler on the idle CPU. If the SMP function is invoked from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd because soft interrupts are handled before ksoftirqd get on the CPU. Adding a trace_printk() in nohz_csd_func() at the spot of raising SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup, and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the current behavior: <idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ from nohz_csd_func <idle>-0 [000] dN.4.: sched_wakeup: comm=ksoftirqd/0 pid=16 prio=120 target_cpu=000 <idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED] <idle>-0 [000] .Ns1.: softirq_exit: vec=7 [action=SCHED] <idle>-0 [000] d..2.: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=16 next_prio=120 ksoftirqd/0-16 [000] d..2.: sched_switch: prev_comm=ksoftirqd/0 prev_pid=16 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120 ... Use __raise_softirq_irqoff() to raise the softirq. The SMP function call is always invoked on the requested CPU in an interrupt handler. It is guaranteed that soft interrupts are handled at the end. Following are the observations with the changes when enabling the same set of events: <idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ for nohz_idle_balance <idle>-0 [000] dN.1.: softirq_raise: vec=7 [action=SCHED] <idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED] No unnecessary ksoftirqd wakeups are seen from idle task's context to service the softirq. Fixes: b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") Closes: https://lore.kernel.org/lkml/fcf823f-195e-6c9a-eac3-25f870cb35ac@inria.fr/ [1] Reported-by: Julia Lawall <julia.lawall@inria.fr> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20241119054432.6405-5-kprateek.nayak@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
K Prateek Nayak authored
[ Upstream commit ff47a0ac ] Commit b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") optimizes IPIs to idle CPUs in TIF_POLLING_NRFLAG mode by setting the TIF_NEED_RESCHED flag in idle task's thread info and relying on flush_smp_call_function_queue() in idle exit path to run the call-function. A softirq raised by the call-function is handled shortly after in do_softirq_post_smp_call_flush() but the TIF_NEED_RESCHED flag remains set and is only cleared later when schedule_idle() calls __schedule(). need_resched() check in _nohz_idle_balance() exists to bail out of load balancing if another task has woken up on the CPU currently in-charge of idle load balancing which is being processed in SCHED_SOFTIRQ context. Since the optimization mentioned above overloads the interpretation of TIF_NEED_RESCHED, check for idle_cpu() before going with the existing need_resched() check which can catch a genuine task wakeup on an idle CPU processing SCHED_SOFTIRQ from do_softirq_post_smp_call_flush(), as well as the case where ksoftirqd needs to be preempted as a result of new task wakeup or slice expiry. In case of PREEMPT_RT or threadirqs, although the idle load balancing may be inhibited in some cases on the ilb CPU, the fact that ksoftirqd is the only fair task going back to sleep will trigger a newidle balance on the CPU which will alleviate some imbalance if it exists if idle balance fails to do so. Fixes: b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241119054432.6405-4-kprateek.nayak@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Valentin Schneider authored
[ Upstream commit efd984c4 ] A following patch will trigger NOHZ idle balances as a means to update nohz.next_balance. Vincent noted that blocked load updates can have non-negligible overhead, which should be avoided if the intent is to only update nohz.next_balance. Add a new NOHZ balance kick flag, NOHZ_NEXT_KICK. Gate NOHZ blocked load update by the presence of NOHZ_STATS_KICK - currently all NOHZ balance kicks will have the NOHZ_STATS_KICK flag set, so no change in behaviour is expected. Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210823111700.2842997-2-valentin.schneider@arm.com Stable-dep-of: ff47a0ac ("sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
K Prateek Nayak authored
[ Upstream commit ea9cffc0 ] The need_resched() check currently in nohz_csd_func() can be tracked to have been added in scheduler_ipi() back in 2011 via commit ca38062e ("sched: Use resched IPI to kick off the nohz idle balance") Since then, it has travelled quite a bit but it seems like an idle_cpu() check currently is sufficient to detect the need to bail out from an idle load balancing. To justify this removal, consider all the following case where an idle load balancing could race with a task wakeup: o Since commit f3dd3f67 ("sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle") a target perceived to be idle (target_rq->nr_running == 0) will return true for ttwu_queue_cond(target) which will offload the task wakeup to the idle target via an IPI. In all such cases target_rq->ttwu_pending will be set to 1 before queuing the wake function. If an idle load balance races here, following scenarios are possible: - The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual IPI is sent to the CPU to wake it out of idle. If the nohz_csd_func() queues before sched_ttwu_pending(), the idle load balance will bail out since idle_cpu(target) returns 0 since target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after sched_ttwu_pending() it should see rq->nr_running to be non-zero and bail out of idle load balancing. - The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI, the sender will simply set TIF_NEED_RESCHED for the target to put it out of idle and flush_smp_call_function_queue() in do_idle() will execute the call function. Depending on the ordering of the queuing of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in nohz_csd_func() should either see target_rq->ttwu_pending = 1 or target_rq->nr_running to be non-zero if there is a genuine task wakeup racing with the idle load balance kick. o The waker CPU perceives the target CPU to be busy (targer_rq->nr_running != 0) but the CPU is in fact going idle and due to a series of unfortunate events, the system reaches a case where the waker CPU decides to perform the wakeup by itself in ttwu_queue() on the target CPU but target is concurrently selected for idle load balance (XXX: Can this happen? I'm not sure, but we'll consider the mother of all coincidences to estimate the worst case scenario). ttwu_do_activate() calls enqueue_task() which would increment "rq->nr_running" post which it calls wakeup_preempt() which is responsible for setting TIF_NEED_RESCHED (via a resched IPI or by setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key thing to note in this case is that rq->nr_running is already non-zero in case of a wakeup before TIF_NEED_RESCHED is set which would lead to idle_cpu() check returning false. In all cases, it seems that need_resched() check is unnecessary when checking for idle_cpu() first since an impending wakeup racing with idle load balancer will either set the "rq->ttwu_pending" or indicate a newly woken task via "rq->nr_running". Chasing the reason why this check might have existed in the first place, I came across Peter's suggestion on the fist iteration of Suresh's patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was: sched_ttwu_do_pending(list); if (unlikely((rq->idle == current) && rq->nohz_balance_kick && !need_resched())) raise_softirq_irqoff(SCHED_SOFTIRQ); Since the condition to raise the SCHED_SOFIRQ was preceded by sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in the current upstream kernel, the need_resched() check was necessary to catch a newly queued task. Peter suggested modifying it to: if (idle_cpu() && rq->nohz_balance_kick && !need_resched()) raise_softirq_irqoff(SCHED_SOFTIRQ); where idle_cpu() seems to have replaced "rq->idle == current" check. Even back then, the idle_cpu() check would have been sufficient to catch a new task being enqueued. Since commit b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") overloads the interpretation of TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based on Peter's suggestion. Fixes: b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Thomas Gleixner authored
[ Upstream commit 79124056 ] The compiler can fully inline the actual handler function of an interrupt entry into the .irqentry.text entry point. If such a function contains an access which has an exception table entry, modpost complains about a section mismatch: WARNING: vmlinux.o(__ex_table+0x447c): Section mismatch in reference ... The relocation at __ex_table+0x447c references section ".irqentry.text" which is not in the list of authorized sections. Add .irqentry.text to OTHER_SECTIONS to cure the issue. Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # needed for linux-5.4-y Link: https://lore.kernel.org/all/20241128111844.GE10431@google.com/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 19331e84 ] Commit 6c730bfc ("modpost: handle -ffunction-sections") added ".text.*" to the OTHER_TEXT_SECTIONS macro to fix certain section mismatch warnings. Unfortunately, this makes it impossible for modpost to warn about section mismatches with LTO, which implies '-ffunction-sections', as all functions are put in their own '.text.<func_name>' sections, which may still reference functions in sections they are not supposed to, such as __init. Fix this by moving ".text.*" into TEXT_SECTIONS, so that configurations with '-ffunction-sections' will see warnings about mismatched sections. Link: https://lore.kernel.org/Y39kI3MOtVI5BAnV@google.com/ Reported-by: Vincent Donnefort <vdonnefort@google.com> Reviewed-and-tested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Stable-dep-of: 79124056 ("modpost: Add .irqentry.text to OTHER_SECTIONS") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Parker Newman authored
[ Upstream commit 7738a7ab ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Ellerman authored
[ Upstream commit cf89c943 ] On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit 045b14ca ("of: WARN on deprecated #address-cells/#size-cells handling"). For example: Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000 WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac ... Call Trace: of_bus_n_size_cells+0x98/0x108 (unreliable) of_bus_default_count_cells+0x40/0x60 __of_get_address+0xc8/0x21c __of_address_to_resource+0x5c/0x228 pmz_init_port+0x5c/0x2ec pmz_probe.isra.0+0x144/0x1e4 pmz_console_init+0x10/0x48 console_init+0xcc/0x138 start_kernel+0x5c4/0x694 As powermacs boot via prom_init it's possible to add the missing properties to the device tree during boot, avoiding the warning. Note that `escc-legacy` nodes are also missing `#size-cells` properties, but they are skipped by the macio driver, so leave them alone. Depends-on: 045b14ca ("of: WARN on deprecated #address-cells/#size-cells handling") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xi Ruoyao authored
[ Upstream commit 4fbd66d8 ] Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415f ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a). Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-