Forked from
drm / kernel
Source project has a limited visibility.
-
Chris Packham authored
Add support for the I2C controller on the RTL9300 SoC. There are two I2C controllers in the RTL9300 that are part of the Ethernet switch register block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst I2C controller, GPIO17 for the second). There are 8 possible SDA pins (GPIO9-16) that can be assigned to either I2C controller. This relationship is represented in the device tree with a child node for each SDA line in use. This is based on the openwrt implementation[1] but has been significantly modified [1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Chris Packham authoredAdd support for the I2C controller on the RTL9300 SoC. There are two I2C controllers in the RTL9300 that are part of the Ethernet switch register block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst I2C controller, GPIO17 for the second). There are 8 possible SDA pins (GPIO9-16) that can be assigned to either I2C controller. This relationship is represented in the device tree with a child node for each SDA line in use. This is based on the openwrt implementation[1] but has been significantly modified [1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c Signed-off-by:
