igt@i915_selftest@live@coherency - incomplete - No warnings/errors
<6> [252.741730] [IGT] i915_selftest: starting dynamic subtest coherency
<5> [252.854977] Setting dangerous option live_selftests - tainting kernel
<7> [252.885142] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no slpc:no)
<7> [252.885317] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found WildcatPoint LP PCH
<7> [252.885425] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
<7> [252.885693] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [252.885817] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [252.886575] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [252.886712] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [252.886829] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [252.887024] i915 0000:00:02.0: vgaarb: deactivate vga console
<7> [252.887419] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = a7f00057
<7> [252.887569] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [252.888166] i915 0000:00:02.0: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
<7> [252.888369] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xa2c92018
<7> [252.888614] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [252.888813] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [252.889054] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x
<7> [252.889253] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported
<7> [252.896530] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483
<7> [252.896718] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [252.896932] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [252.897132] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [252.897786] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [252.897996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 189
<7> [252.898184] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [252.898387] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [252.898589] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6
<7> [252.898801] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7> [252.899052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [252.903893] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
<7> [252.904054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
<7> [252.904194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS supported mode is static
<7> [252.904345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [252.904486] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT initial LVDS value 300
<7> [252.904625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
<7> [252.904771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<7> [252.904953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS State Enabled:1
<7> [252.905151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [252.905355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [252.905559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0
<7> [252.905758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [252.906006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 6
<7> [252.906209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [252.906413] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 6
<7> [252.906744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [252.906993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [252.907743] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [252.908309] i915 0000:00:02.0: [drm:intel_init_pm [i915]] SAGV supported: no, original SAGV block time: 0 us
<7> [252.908479] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec)
<7> [252.908646] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Primary WM1 latency 50 (25.0 usec)
<7> [252.908815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Primary WM2 latency 90 (45.0 usec)
<7> [252.909026] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Primary WM3 latency 130 (65.0 usec)
<7> [252.909192] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec)
<7> [252.909341] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec)
<7> [252.909500] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 50 (25.0 usec)
<7> [252.909654] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 90 (45.0 usec)
<7> [252.909762] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 130 (65.0 usec)
<7> [252.909949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec)
<7> [252.910064] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec)
<7> [252.910173] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 50 (25.0 usec)
<7> [252.910281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 90 (45.0 usec)
<7> [252.910389] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 130 (65.0 usec)
<7> [252.910497] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec)
<7> [252.914972] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [252.916458] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 2
<7> [252.916669] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz
<7> [252.916919] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 540000 kHz
<7> [252.917160] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
<7> [252.917379] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:76:DDI B/PHY B]
<7> [252.917576] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
<7> [252.918106] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
<7> [252.918329] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:84:DDI C/PHY C]
<7> [252.918944] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:84:DDI C/PHY C]