igt@i915_selftest@live@* - Dmesg-Fail - *ERROR* SNPS PHY E failed to calibrate after 25ms
Dmesg:
<6> [204.291298] [IGT] i915_selftest: starting dynamic subtest uncore
<5> [204.541936] Setting dangerous option live_selftests - tainting kernel
<7> [204.586876] i915 0000:03:00.0: [drm:i915_driver_probe [i915]] WOPCM: 2048K
<7> [204.587153] i915 0000:03:00.0: [drm:intel_uc_init_early [i915]] enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)
<6> [204.587294] i915 0000:03:00.0: [drm] Incompatible option enable_guc=3 - HuC is not supported!
<7> [204.587299] i915 0000:03:00.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7> [204.587626] i915 0000:03:00.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 38400 kHz
<7> [204.588119] i915 0000:03:00.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005
<7> [204.588230] i915 0000:03:00.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0003, instances: 0003
<7> [204.588976] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [204.589091] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7> [204.589200] i915 0000:03:00.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6> [204.589306] i915 0000:03:00.0: [drm] VT-d active for gfx access
<6> [204.589317] i915 0000:03:00.0: vgaarb: deactivate vga console
<7> [204.589702] i915 0000:03:00.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000003ffc00147
<7> [204.589879] i915 0000:03:00.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 24576K, usable: 20480K
<7> [204.590291] i915 0000:03:00.0: [drm:i915_gem_stolen_lmem_setup [i915]] Stolen Local memory IO start: 0x00000043fe800000
<7> [204.591072] i915 0000:03:00.0: [drm:intel_gt_setup_lmem [i915]] Local memory: [mem 0x00000000-0x3f9ffffff]
<7> [204.591191] i915 0000:03:00.0: [drm:intel_gt_setup_lmem [i915]] Local memory IO start: 0x0000004000000000
<6> [204.591304] i915 0000:03:00.0: [drm] Local memory available: 0x00000003fa000000
<7> [204.591327] i915 0000:03:00.0: [drm:i915_driver_probe [i915]] can't enable MSI
<7> [204.591426] i915 0000:03:00.0: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
<7> [204.591566] i915 0000:03:00.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x0
<7> [204.591705] i915 0000:03:00.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion not supported!
<7> [204.591942] i915 0000:03:00.0: [drm:intel_pcode_init [i915]] PCODE init status 0
<7> [204.592669] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [204.641323] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found valid VBT in SPI flash
<7> [204.641467] i915 0000:03:00.0: [drm:intel_bios_init [i915]] VBT signature "$VBT DASH G2 ", BDB version 242
<7> [204.641603] i915 0000:03:00.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [204.641752] i915 0000:03:00.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [204.641886] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 242 not known; assuming 39
<7> [204.642019] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7> [204.642157] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [204.642294] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [204.642431] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [204.642568] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
<7> [204.642701] i915 0000:03:00.0: [drm:intel_bios_init [i915]] DRRS supported mode is seamless
<7> [204.642846] i915 0000:03:00.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [204.642980] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [204.643113] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [204.643246] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 9
<7> [204.643378] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port A VBT DP max link rate: 1000000
<7> [204.643511] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [204.643644] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9
<7> [204.643787] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port B VBT DP max link rate: 1000000
<7> [204.643920] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [204.644053] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 9
<7> [204.644216] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port C VBT DP max link rate: 1000000
<7> [204.644351] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port H VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [204.644485] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port H VBT HDMI level shift: 9
<7> [204.644618] i915 0000:03:00.0: [drm:intel_bios_init [i915]] Port H VBT DP max link rate: 1000000
<7> [204.644769] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [204.645076] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [204.645255] i915 0000:03:00.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [204.645514] i915 0000:03:00.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3
<3> [204.670789] i915 0000:03:00.0: [drm] *ERROR* SNPS PHY E failed to calibrate after 25ms.
<7> [204.670855] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [204.671005] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling DC off
<7> [204.671153] i915 0000:03:00.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [204.671355] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [204.671517] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well A
<7> [204.671691] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well B
<7> [204.671859] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well C
<7> [204.672011] i915 0000:03:00.0: [drm:intel_power_well_enable [i915]] enabling power well D
<7> [204.672575] i915 0000:03:00.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/tgl_dmc_ver2_12.bin
<7> [204.673814] i915 0000:03:00.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<6> [204.674894] i915 0000:03:00.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
<3> [204.675454] genirq: Flags mismatch irq 0. 00000080 (i915) vs. 00015a00 (timer)
<3> [204.694367] i915 0000:03:00.0: Device initialization failed (-16)
<4> [204.694388] i915: probe of 0000:03:00.0 failed with error -16Edited by Ravi V