igt@i915_pm_rpm@module-reload - incomplete - drm_WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10580/fi-jsl-1/igt@i915_pm_rpm@module-reload.html
<7> [384.540697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<3> [384.541047] i915 0000:00:02.0: [drm] *ERROR* VBT claims to have both internal and external displays on PHY A. Configuring for internal.
<7> [384.541138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [384.541892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [384.542198] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [384.544335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [384.544550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 3
<7> [384.544838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 4
<7> [384.545915] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/icl_dmc_ver1_09.bin
<6> [384.547637] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)
<7> [384.549819] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [384.551601] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [384.551758] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)
<7> [384.551897] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 22 (22.0 usec)
<7> [384.552032] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)
<7> [384.552167] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 32 (32.0 usec)
<7> [384.552302] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 75 (75.0 usec)
<7> [384.552924] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 135 (135.0 usec)
<7> [384.553073] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 142 (142.0 usec)
<7> [384.559232] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [384.565646] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0
<7> [384.565935] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz
<7> [384.566118] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1113600 kHz
<7> [384.572933] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (platform default)
<7> [384.573209] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:238:DDI A/PHY A]
<7> [384.575523] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [384.575735] [drm:intel_pps_dump_state [i915]] vbt t1_t3 0 t8 0 t9 0 t10 0 t11_t12 1000
<7> [384.575906] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [384.576101] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 1
<7> [384.576534] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [384.576770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX A
<7> [384.577135] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] Turning [ENCODER:238:DDI A/PHY A] VDD on
<7> [384.577424] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
<7> [385.216544] i915 0000:00:02.0: [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
<7> [385.216768] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [385.217028] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [385.217204] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:238:DDI A/PHY A] panel power wasn't enabled
<7> [385.424525] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps] AUX A/DDI A/PHY A: DPCD: 14 0a 82 41 00 00 01 c0 02 00 00 00 0f 09 00
<7> [385.425147] i915 0000:00:02.0: [drm:drm_dp_read_desc] AUX A/DDI A/PHY A: DP sink: OUI 00-1c-f8 dev-ID \223\006UA\023\001 HW-rev 10.0 SW-rev 2.24 quirks 0x0000
<7> [385.427418] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 ff ef
<7> [385.428164] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
<7> [385.429638] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
<7> [385.431823] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 01 11 01 00 01 00 01 c0 00 01 06 00 00 00 00
<7> [385.432005] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0
<7> [385.442510] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [385.442520] [drm:drm_add_display_info] non_desktop set to 0
<7> [385.442542] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [385.442546] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [385.442550] [drm:drm_add_display_info] non_desktop set to 0
<7> [385.442580] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [385.442584] [drm:drm_add_display_info] non_desktop set to 0
<7> [385.442608] i915 0000:00:02.0: [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:239:eDP-1] using preferred mode from EDID:
<7> [385.442809] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 90 214000 1920 1936 1952 2104 1080 1083 1097 1128 0x48 0xa
<7> [385.442822] i915 0000:00:02.0: [drm:intel_drrs_init [i915]] VBT doesn't support DRRS
<7> [385.443134] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/96000
<7> [385.445833] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
<7> [385.446101] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:246:DDI B/PHY B]
<7> [385.448906] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [385.450790] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:246:DDI B/PHY B]
<7> [385.451229] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port B (platform default)
<7> [385.454117] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default)
<7> [385.454855] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI C (TC)/PHY C]
<7> [385.457135] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [385.457361] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:262:DDI C (TC)/PHY C]
<7> [385.457592] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port C (platform default)
<7> [385.458164] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (platform default)
<7> [385.458668] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:272:DDI D (TC)/PHY A]
<7> [385.461127] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [385.461605] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:272:DDI D (TC)/PHY A]
<7> [385.461970] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port D (platform default)
<4> [385.462281] ------------[ cut here ]------------
<4> [385.462283] i915 0000:00:02.0: drm_WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
<4> [385.462586] WARNING: CPU: 1 PID: 5372 at drivers/gpu/drm/i915/display/intel_gmbus.c:919 intel_gmbus_get_adapter+0x54/0x60 [i915]
<4> [385.464534] Modules linked in: i915(+) vgem fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm r8169 i2c_i801 i2c_smbus realtek ttm intel_lpss_pci prime_numbers [last unloaded: i915]
<4> [385.464589] CPU: 1 PID: 5372 Comm: i915_pm_rpm Not tainted 5.15.0-rc1-CI-CI_DRM_10580+ #1
<4> [385.464593] Hardware name: Intel Corporation Jasper Lake Client Platform/Jasperlake DDR4 SODIMM RVP, BIOS JSLSFWI1.R00.2385.D02.2010160831 10/16/2020
<4> [385.464597] RIP: 0010:intel_gmbus_get_adapter+0x54/0x60 [i915]
<4> [385.464791] Code: 48 8b 5f 50 48 85 db 75 03 48 8b 1f e8 15 3c 46 e1 48 c7 c1 58 f1 39 a0 48 89 da 48 c7 c7 23 bb 3b a0 48 89 c6 e8 48 26 7d e1 <0f> 0b 31 c0 5b c3 66 0f 1f 44 00 00 8b 87 b4 07 00 00 80 e4 fc 09
<4> [385.464794] RSP: 0018:ffffc90000f43968 EFLAGS: 00010286
<4> [385.464799] RAX: 0000000000000000 RBX: ffff88810313ab90 RCX: 0000000000000001
<4> [385.464802] RDX: 0000000080000001 RSI: ffffffff8231421d RDI: 00000000ffffffff
<4> [385.464805] RBP: ffff88810f09a000 R08: 0000000000000000 R09: c0000000ffff9485
<4> [385.464807] R10: fffffffffff7ad48 R11: ffffc90000f43780 R12: ffff888240820000
<4> [385.464810] R13: 0000000000000004 R14: 0000000000000003 R15: ffff888240820000
<4> [385.464812] FS: 00007fa4fe1a6c00(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
<4> [385.464816] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [385.464818] CR2: 00005562e785c1d0 CR3: 000000011d600000 CR4: 0000000000350ee0
<4> [385.464821] Call Trace:
<4> [385.464826] intel_hdmi_init_connector+0x182/0x860 [i915]
<4> [385.465000] intel_ddi_init+0x857/0xc00 [i915]
<4> [385.465172] intel_modeset_init_nogem+0x9b8/0x1330 [i915]
<4> [385.465877] ? _raw_spin_unlock_irqrestore+0x3d/0x60
<4> [385.465888] ? gen11_fwtable_read32+0x8f/0x2f0 [i915]
<4> [385.466047] i915_driver_probe+0x844/0xdb0 [i915]
<4> [385.466216] ? __pm_runtime_resume+0x4f/0x80
<4> [385.466227] i915_pci_probe+0x43/0x1d0 [i915]
<4> [385.468421] ? _raw_spin_unlock_irqrestore+0x3d/0x60
<4> [385.468435] pci_device_probe+0x9b/0x110
<4> [385.468444] really_probe+0x1b0/0x3b0
<4> [385.468452] __driver_probe_device+0xf6/0x170
<4> [385.468458] driver_probe_device+0x1a/0x90
<4> [385.468464] __driver_attach+0x93/0x160
<4> [385.468468] ? __device_attach_driver+0xd0/0xd0
<4> [385.468473] ? __device_attach_driver+0xd0/0xd0
<4> [385.468478] bus_for_each_dev+0x72/0xc0
<4> [385.468486] bus_add_driver+0x14b/0x1f0
<4> [385.468493] driver_register+0x66/0xb0
<4> [385.468497] i915_init+0x1f/0x91 [i915]
<4> [385.468660] ? 0xffffffffa0580000
<4> [385.468664] do_one_initcall+0x53/0x2e0
<4> [385.468670] ? 0xffffffffa0580000
<4> [385.468678] do_init_module+0x55/0x200
<4> [385.468685] load_module+0x2700/0x2980
<4> [385.468712] ? __do_sys_finit_module+0xaa/0x110
<4> [385.468717] __do_sys_finit_module+0xaa/0x110
<4> [385.468735] do_syscall_64+0x37/0xb0
<4> [385.468741] entry_SYSCALL_64_after_hwframe+0x44/0xae
<4> [385.468746] RIP: 0033:0x7fa500d3689d