igt@i915_selftest@live@mman - Incomplete - No errors/warnings
https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6133/shard-skl1/igt@i915_selftest@live@mman.html
Dmesg
<6> [1203.043628] [IGT] i915_selftest: starting dynamic subtest mman
<5> [1204.024970] Setting dangerous option enable_psr - tainting kernel
<5> [1204.025019] Setting dangerous option live_selftests - tainting kernel
<3> [1204.364663] debugfs: File 'page_pool' in directory 'ttm' already present!
<3> [1204.364950] debugfs: File 'page_pool_shrink' in directory 'ttm' already present!
<3> [1204.365275] debugfs: File 'tt_shrink' in directory 'ttm' already present!
<3> [1204.365785] debugfs: File 'buffer_objects' in directory 'ttm' already present!
<7> [1204.366317] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] WOPCM: 1024K
<7> [1204.368933] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no)
<7> [1204.370689] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
<7> [1204.372281] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02
<7> [1204.375485] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [1204.376911] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [1204.383062] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [1204.384510] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [1204.385984] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [1204.387455] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [1204.387599] i915 0000:00:02.0: vgaarb: deactivate vga console
<7> [1204.392811] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047
<7> [1204.394465] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [1204.396273] [drm:i915_driver_probe [i915]] Initialized 5 GT workarounds on global
<7> [1204.399488] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7ab5f5e0
<7> [1204.401493] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [1204.403090] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [1204.404932] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [1204.406531] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [1204.408170] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [1204.409789] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: LPDDR3
<7> [1204.411144] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no
<7> [1204.412497] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [1204.413792] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
<7> [1204.415058] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no
<7> [1204.416526] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [1204.417781] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
<7> [1204.419047] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes
<7> [1204.420435] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2
<7> [1204.421683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [1204.427084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [1204.428295] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203
<7> [1204.429498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [1204.431104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [1204.432739] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [1204.434476] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [1204.436101] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [1204.437756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
<7> [1204.439310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS supported mode is static
<7> [1204.440950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT legacy lfp table:
<7> [1204.442486] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [1204.442550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 0, level 255, controller 0
<7> [1204.444211] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS State Enabled:1
<7> [1204.445808] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [1204.447490] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [1204.449112] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0
<7> [1204.450701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [1204.452277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8
<7> [1204.453878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [1204.455435] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8
<7> [1204.457088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [1204.459104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [1204.460706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC IO power well
<7> [1204.462479] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [1204.467513] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
<7> [1204.468639] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz
<7> [1204.469826] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [1204.471816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [1204.473287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
<7> [1204.474525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.15 [i915]] Setting DC state from 00 to 00
<7> [1204.475975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [1204.477797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
<7> [1204.479207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
<7> [1204.480812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
<7> [1204.482057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
<7> [1204.483782] i915 0000:00:02.0: [drm:intel_dmc_ucode_init [i915]] Loading i915/skl_dmc_ver1_27.bin
<6> [1204.491257] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
<6> [1204.491276] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
<7> [1204.491293] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
<7> [1204.495293] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [1204.496475] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
<7> [1204.497806] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
<7> [1204.499099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
<7> [1204.500458] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
<7> [1204.501718] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
<7> [1204.503027] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
<7> [1204.504293] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
<7> [1204.519772] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [1204.534470] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [1204.536475] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
<7> [1204.538316] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]
<7> [1204.540925] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [1204.542626] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7> [1204.544267] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [1204.545838] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7> [1204.547693] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<7> [1204.550735] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] Turning [ENCODER:94:DDI A/PHY A] VDD on
<7> [1204.552478] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
<7> [1205.179851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
<7> [1205.181205] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [1205.182692] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008
<7> [1205.184277] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] panel power wasn't enabled
<7> [1205.390612] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00
<7> [1205.393208] i915 0000:00:02.0: [drm:drm_dp_read_desc] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [1205.395028] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff
<7> [1205.398241] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
<7> [1205.420118] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [1205.420175] [drm:drm_add_display_info] non_desktop set to 0
<7> [1205.420303] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [1205.420509] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [1205.420548] [drm:drm_add_display_info] non_desktop set to 0
<7> [1205.420710] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [1205.420748] [drm:drm_add_display_info] non_desktop set to 0
<7> [1205.420979] i915 0000:00:02.0: [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:95:eDP-1] using preferred mode from EDID:
<7> [1205.422574] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa
<7> [1205.422661] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
<7> [1205.426712] i915 0000:00:02.0: [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/187
<7> [1205.430549] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)
<7> [1205.432313] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]
<7> [1205.437054] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [1205.438272] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]
<7> [1205.439630] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
<7> [1205.443146] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
<7> [1205.444918] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI C/PHY C]
<7> [1205.448912] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported
<7> [1205.450314] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI C/PHY C]
<7> [1205.451444] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
<7> [1205.453986] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port D is not present
<7> [1205.455306] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port E is not present
<7> [1205.456837] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] VBT says port F is not present
<7> [1205.459776] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<7> [1205.461645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled
<7> [1205.464302] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled
<7> [1205.465678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [1205.467320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [1205.468655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A
<7> [1205.470440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B
<7> [1205.471999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B
<7> [1205.473290] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B
<7> [1205.475001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C
<7> [1205.476498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C