- Feb 20, 2025
-
-
Visweswara Tanuku authored
In case of interrupt delay for any reason, slim_do_transfer() returns timeout error but the transaction ID (TID) is not freed. This results into invalid memory access inside qcom_slim_ngd_rx_msgq_cb() due to invalid TID. Fix the issue by freeing the TID in slim_do_transfer() before returning timeout error to avoid invalid memory access. Call trace: __memcpy_fromio+0x20/0x190 qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl] vchan_complete+0x2a0/0x4a0 tasklet_action_common+0x274/0x700 tasklet_action+0x28/0x3c _stext+0x188/0x620 run_ksoftirqd+0x34/0x74 smpboot_thread_fn+0x1d8/0x464 kthread+0x178/0x238 ret_from_fork+0x10/0x20 Code: aa0003e8 91000429 f100044a 3940002b (3800150b) ---[ end trace 0fe00bec2b975c99 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt. Fixes: afbdcc7c ("slimbus: Add messaging APIs to slimbus framework") Cc: stable <stable@kernel.org> Signed-off-by:
Visweswara Tanuku <quic_vtanuku@quicinc.com> Link: https://lore.kernel.org/r/20250124125740.16897-1-quic_vtanuku@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
The vboxguest driver depends on port I/O for debug output: include/asm-generic/io.h:626:15: error: call to '_outl' declared with attribute error: outl() requires CONFIG_HAS_IOPORT 626 | #define _outl _outl include/asm-generic/io.h:663:14: note: in expansion of macro '_outl' 663 | #define outl _outl | ^~~~~ drivers/virt/vboxguest/vboxguest_utils.c:102:9: note: in expansion of macro 'outl' 102 | outl(phys_req, gdev->io_port + VMMDEV_PORT_OFF_REQUEST); | ^~~~ Most arm64 platforms don't actually support port I/O, though it is currently enabled unconditionally. Refine the vbox dependency to allow turning HAS_IOPORT off in the future when building for platforms without port I/O and allow compile-testing on all architectures. Fixes: 5cf8f938 ("vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250122065445.1469218-1-arnd@kernel.org Signed-off-by:
-
Qiu-ji Chen authored
Fixed a possible UAF problem in driver_override_show() in drivers/cdx/cdx.c This function driver_override_show() is part of DEVICE_ATTR_RW, which includes both driver_override_show() and driver_override_store(). These functions can be executed concurrently in sysfs. The driver_override_store() function uses driver_set_override() to update the driver_override value, and driver_set_override() internally locks the device (device_lock(dev)). If driver_override_show() reads cdx_dev->driver_override without locking, it could potentially access a freed pointer if driver_override_store() frees the string concurrently. This could lead to printing a kernel address, which is a security risk since DEVICE_ATTR can be read by all users. Additionally, a similar pattern is used in drivers/amba/bus.c, as well as many other bus drivers, where device_lock() is taken in the show function, and it has been working without issues. This potential bug was detected by our experimental static analysis tool, which analyzes locking APIs and paired functions to identify data races and atomicity violations. Fixes: 1f86a00c ("bus/fsl-mc: add support for 'driver_override' in the mc-bus") Cc: stable <stable@kernel.org> Signed-off-by:
Qiu-ji Chen <chenqiuji666@gmail.com> Link: https://lore.kernel.org/r/20250118070833.27201-1-chenqiuji666@gmail.com Signed-off-by:
-
Alexander Shishkin authored
Add support for the Trace Hub in Panther Lake-P/U. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20250211185017.1759193-6-alexander.shishkin@linux.intel.com Signed-off-by:
-
Alexander Shishkin authored
Add support for the Trace Hub in Panther Lake-H. Signed-off-by:
-
Pawel Chmielewski authored
Add support for the Trace Hub in Arrow Lake. Signed-off-by:
Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by:
-
Alexander Shishkin authored
Correct function comments to prevent kernel-doc warnings found when using "W=1" that the drive-by fixers had trouble documenting and skipped over. msu.c:168: warning: Function parameter or struct member 'msu_base' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'work' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'switch_on_unlock' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'iter_list' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'stop_on_full' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'do_irq' not described in 'msc' msu.c:168: warning: Function parameter or struct member 'multi_is_broken' not described in 'msc' Signed-off-by:
-
Andy Shevchenko authored
Correct function comments to prevent kernel-doc warnings found when using "W=1". msu.c:162: warning: Function parameter or struct member 'mbuf_priv' not described in 'msc' msu.c:164: warning: Function parameter or struct member 'orig_addr' not described in 'msc' msu.c:164: warning: Function parameter or struct member 'orig_sz' not described in 'msc' Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'mhi-fixes-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus Manivannan writes: MHI Host ======== - Use pci_try_reset_function() to reset the MHI function during recovery process to avoid the deadlock reported on the X1E80100 CRD device. The deadlock can happen if the caller has already acquired the 'device_lock()' while calling the recovery function. So using pci_try_reset_function() avoids the deadlock by returning -EAGAIN if the lock was already acquired. * tag 'mhi-fixes-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
-
- Feb 19, 2025
-
-
Eddie James authored
Due to job transitions, both Joel and Jeremy can no longer maintain the FSI subsystem. I will take over. I also replaced Alistair with Ninad as a reviewer, as Alistair doesn't have access to hardware and hasn't been active. I also removed the link to Joel's FSI tree as he won't be maintaining it. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Link: https://lore.kernel.org/r/20250213225746.2159118-1-eajames@linux.ibm.com Signed-off-by:
-
Mike Lothian authored
This allows ntsync to be usuable by non-root processes out of the box Signed-off-by:
Mike Lothian <mike@fireburn.co.uk> Reviewed-by:
Elizabeth Figura <zfigura@codeweavers.com> Link: https://lore.kernel.org/r/20250214122759.2629-2-mike@fireburn.co.uk Signed-off-by:
-
Manivannan Sadhasivam authored
There are multiple places from where the recovery work gets scheduled asynchronously. Also, there are multiple places where the caller waits synchronously for the recovery to be completed. One such place is during the PM shutdown() callback. If the device is not alive during recovery_work, it will try to reset the device using pci_reset_function(). This function internally will take the device_lock() first before resetting the device. By this time, if the lock has already been acquired, then recovery_work will get stalled while waiting for the lock. And if the lock was already acquired by the caller which waits for the recovery_work to be completed, it will lead to deadlock. This is what happened on the X1E80100 CRD device when the device died before shutdown() callback. Driver core calls the driver's shutdown() callback while holding the device_lock() leading to deadlock. And this deadlock scenario can occur on other paths as well, like during the PM suspend() callback, where the driver core would hold the device_lock() before calling driver's suspend() callback. And if the recovery_work was already started, it could lead to deadlock. This is also observed on the X1E80100 CRD. So to fix both issues, use pci_try_reset_function() in recovery_work. This function first checks for the availability of the device_lock() before trying to reset the device. If the lock is available, it will acquire it and reset the device. Otherwise, it will return -EAGAIN. If that happens, recovery_work will fail with the error message "Recovery failed" as not much could be done. Cc: stable@vger.kernel.org # 5.12 Reported-by:
Johan Hovold <johan@kernel.org> Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com Fixes: 7389337f ("mhi: pci_generic: Add suspend/resume/recovery procedure") Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Tested-by:
Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
Hans de Goede authored
The _CRS ACPI resources table has 2 entries for the host wakeup GPIO, the first one being a regular GpioIo () resource while the second one is a GpioInt () resource for the same pin. The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio () resource to "wakeuphost-gpios" where as the second GpioInt () entry is mapped to "wakeuphostint-gpios". Using "wakeuphost" to request the GPIO as was done until now, means that the gpiolib-acpi code does not know that the GPIO is active-low as that info is only available in the GpioInt () entry. Things were still working before due to the following happening: 1. Since the 2 entries point to the same pin they share a struct gpio_desc 2. The SPI core creates the SPI device vsc-tp.c binds to and calls acpi_dev_gpio_irq_get(). This does use the second entry and sets FLAG_ACTIVE_LOW in gpio_desc.flags . 3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the active-low flag set by acpi_dev_gpio_irq_get() But there is a possible scenario where things do not work: 1. - 3. happen as above 4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested next, but its USB GPIO controller is not available yet, so this call returns -EPROBE_DEFER. 5. The gpio_desc for "wakeuphost" is put() and during this the active-low flag is cleared from gpio_desc.flags . 6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it is not marked active-low. The difference can also be seen in /sys/kernel/debug/gpio, which contains the following line for this GPIO: gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW If the second scenario is hit the "ACTIVE LOW" at the end disappears and things do not work. Fix this by requesting the GPIO through the "wakeuphostint" mapping instead which provides active-low info without relying on acpi_dev_gpio_irq_get() pre-populating this info in the gpio_desc. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918 Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: 566f5ca9 ("mei: Add transport driver for IVSC device") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com Signed-off-by:
-
Alexander Usyskin authoredAdd Panther Lake P device id. Cc: stable <stable@kernel.org> Co-developed-by:
Tomas Winkler <tomasw@gmail.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com Signed-off-by:
-
- Feb 12, 2025
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.14 cycle hid-sensors - Fix an ABI issue that occurred when we gained multiple proximity sensor support. adi,adi-axi-adc - Fix missing pwm-names inItems entry in dt binding. adi,ad3552r - Make sure to clear the reset bit in the status flag so future resets can be detected. adi,ad7192 - Fix use of value where it should be bit(value) to select channel. adi,ad7606 - Fix up reporting of wrong available scales. adi,admv8818 - Force SDO line to be initialized without relying on it already being intialized to read back current register value. atmel,sama5d2 - Fix wrong number of bits reported for readings from sama7g5 avago,apds9306 - Fix wrong scaling of scale values (missing a few zeros). microchip,pac1921 - Fix resource leak by moving ACPI_FREE() call up a few lines. tyhx,hx9023s - Fix a use after free caused by releasing firmware a few lines early. * tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: filter: admv8818: Force initialization of SDO iio: adc: ad7606: fix wrong scale available dt-bindings: iio: dac: adi-axi-adc: fix ad7606 pwm-names iio: dac: ad3552r: clear reset status flag iio: adc: ad7192: fix channel select iio: hid-sensor-prox: Split difference from multiple channels iio: proximity: Fix use-after-free in hx9023s_send_cfg() iio: adc: at91-sama5d2_adc: fix sama7g5 realbits value iio: adc: pac1921: Move ACPI_FREE() to cover all branches iio: light: apds9306: fix max_scale_nano values
-
- Feb 09, 2025
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf warnings regardless of the W= option - Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get() - Fix a build regression of the Debian linux-headers package * tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: install-extmod-build: add missing quotation marks for CC variable kbuild: fix misspelling in scripts/Makefile.lib kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "Fix a recently introduced kernel crash due to a NULL pointer dereference during system-wide suspend (Rafael Wysocki)" * tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Restrict power.set_active propagation
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Correctly clean the BSS to the PoC before allowing EL2 to access it on nVHE/hVHE/protected configurations - Propagate ownership of debug registers in protected mode after the rework that landed in 6.14-rc1 - Stop pretending that we can run the protected mode without a GICv3 being present on the host - Fix a use-after-free situation that can occur if a vcpu fails to initialise the NV shadow S2 MMU contexts - Always evaluate the need to arm a background timer for fully emulated guest timers - Fix the emulation of EL1 timers in the absence of FEAT_ECV - Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0 s390: - move some of the guest page table (gmap) logic into KVM itself, inching towards the final goal of completely removing gmap from the non-kvm memory management code. As an initial set of cleanups, move some code from mm/gmap into kvm and start using __kvm_faultin_pfn() to fault-in pages as needed; but especially stop abusing page->index and page->lru to aid in the pgdesc conversion. x86: - Add missing check in the fix to defer starting the huge page recovery vhost_task - SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits) KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking KVM: remove kvm_arch_post_init_vm KVM: selftests: Fix spelling mistake "initally" -> "initially" kvm: x86: SRSO_USER_KERNEL_NO is not synthesized KVM: arm64: timer: Don't adjust the EL2 virtual timer offset KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV KVM: arm64: timer: Always evaluate the need for a soft timer KVM: arm64: Fix nested S2 MMU structures reallocation KVM: arm64: Fail protected mode init if no vgic hardware is present KVM: arm64: Flush/sync debug state in protected mode KVM: s390: selftests: Streamline uc_skey test to issue iske after sske KVM: s390: remove the last user of page->index KVM: s390: move PGSTE softbits KVM: s390: remove useless page->index usage KVM: s390: move gmap_shadow_pgt_lookup() into kvm KVM: s390: stop using lists to keep track of used dat tables KVM: s390: stop using page->index for non-shadow gmaps KVM: s390: move some gmap shadowing functions away from mm/gmap.c KVM: s390: get rid of gmap_translate() KVM: s390: get rid of gmap_fault() ... -
Rafael J. Wysocki authored
Commit 3775fc53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") exposed an issue related to simple_pm_bus_pm_ops that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as bus type PM callbacks for the noirq phases of system-wide suspend and resume. The problem is that pm_runtime_force_suspend() does not distinguish runtime-suspended devices from devices for which runtime PM has never been enabled, so if it sees a device with runtime PM status set to RPM_ACTIVE, it will assume that runtime PM is enabled for that device and so it will attempt to suspend it with the help of its runtime PM callbacks which may not be ready for that. As it turns out, this causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer dereference. Another problem related to the above commit and simple_pm_bus_pm_ops is that setting runtime PM status of a device handled by the latter to RPM_ACTIVE will actually prevent it from being resumed because pm_runtime_force_resume() only resumes devices with runtime PM status set to RPM_SUSPENDED. To mitigate these issues, do not allow power.set_active to propagate beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that will need to be resumed, which should be a sufficient stop-gap for the time being, but they will need to be properly addressed in the future because in general during system-wide resume it is necessary to resume all devices in a dependency chain in which at least one device is going to be resumed. Fixes: 3775fc53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/ Reported-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
-
- Feb 08, 2025
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fixes from Kees Cook: "Address a KUnit stack initialization regression that got tickled on m68k, and solve a Clang(v14 and earlier) bug found by 0day: - Fix stackinit KUnit regression on m68k - Use ARRAY_SIZE() for memtostr*()/strtomem*()" * tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*() compiler.h: Introduce __must_be_byte_array() compiler.h: Move C string helpers into C-only kernel section stackinit: Fix comment for test_small_end stackinit: Keep selftest union size small on m68k
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull seccomp fix from Kees Cook: "This is really a work-around for x86_64 having grown a syscall to implement uretprobe, which has caused problems since v6.11. This may change in the future, but for now, this fixes the unintended seccomp filtering when uretprobe switched away from traps, and does so with something that should be easy to backport. - Allow uretprobe on x86_64 to avoid behavioral complications (Eyal Birger)" * tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: validate uretprobe syscall passes through seccomp seccomp: passthrough uretprobe systemcall without filtering -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull execve fix from Kees Cook: "This is an alpha-specific fix, but since it touched ELF I was asked to carry it. - alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support (Eric W. Biederman)" * tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A number of fairly small fixes, mostly in drivers but two in the core to change a retry for depopulation (a trendy new hdd thing that reorganizes blocks away from failing elements) and one to fix a GFP_ annotation to avoid a lock dependency (the third core patch is all in testing)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla1280: Fix kernel oops when debug level > 2 scsi: ufs: core: Fix error return with query response scsi: storvsc: Set correct data length for sending SCSI command without payload scsi: ufs: core: Fix use-after free in init error and remove paths scsi: core: Do not retry I/Os during depopulation scsi: core: Use GFP_NOIO to avoid circular locking dependency scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed scsi: ufs: core: Ensure clk_gating.lock is used only after initialization scsi: ufs: core: Simplify temperature exception event handling scsi: target: core: Add line break to status show scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions scsi: core: Add passthrough tests for success and no failure definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c reverts from Wolfram Sang: "It turned out the new mechanism for handling created devices does not handle all muxing cases. Revert the changes to give a proper solution more time" * tag 'i2c-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: Replace list-based mechanism for handling auto-detected clients" Revert "i2c: Replace list-based mechanism for handling userspace-created clients"
-
https://github.com/Rust-for-Linux/linuxLinus Torvalds authored
Pull rust fixes from Miguel Ojeda: - Do not export KASAN ODR symbols to avoid gendwarfksyms warnings - Fix future Rust 1.86.0 (to be released 2025-04-03) x86_64 builds - Clean future Rust 1.86.0 (to be released 2025-04-03) warning - Fix future GCC 15 (to be released in a few months) builds - Fix `rusttest` target in macOS * tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux: x86: rust: set rustc-abi=x86-softfloat on rustc>=1.86.0 rust: kbuild: do not export generated KASAN ODR symbols rust: kbuild: add -fzero-init-padding-bits to bindgen_skip_cflags rust: init: use explicit ABI to clean warning in future compilers rust: kbuild: use host dylib naming in rusttestlib-kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Function graph fix of notrace functions. When the function graph tracer was restructured to use the global section of the meta data in the shadow stack, the bit logic was changed. There's a TRACE_GRAPH_NOTRACE_BIT that is the bit number in the mask that tells if the function graph tracer is currently in the "notrace" mode. The TRACE_GRAPH_NOTRACE is the mask with that bit set. But when the code we restructured, the TRACE_GRAPH_NOTRACE_BIT was used when it should have been the TRACE_GRAPH_NOTRACE mask. This made notrace not work properly" * tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Fix a build regression on GCC 15 builds, caused by GCC changing the default C version that is overriden in the main Makefile but not in the x86 boot code Makefile" * tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Use '-std=gnu11' to fix build with GCC 15
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Fix a PREEMPT_RT bug in the clocksource verification code that caused false positive warnings. Also fix a timer migration setup bug when new CPUs are added" * tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/migration: Fix off-by-one root mis-connection clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Fix a cfs_rq->h_nr_runnable accounting bug that trips up a defensive SCHED_WARN_ON() on certain workloads. The bug is believed to be (accidentally) self-correcting, hence no behavioral side effects are expected. Also print se.slice in debug output, since this value can now be set via the syscall ABI and can be useful to track" * tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Provide slice length for fair tasks sched/fair: Fix inaccurate h_nr_runnable accounting with delayed dequeue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Another followup fix for the procps genirq output formatting regression caused by an optimization" * tag 'irq-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fix a dangling pointer bug in the futex code used by the uring code. It isn't causing problems at the moment due to uring ABI limitations leaving it essentially unused in current usages, but is a good idea to fix nevertheless" * tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Pass in task to futex_queue()
-
Steven Rostedt authored
The code was restructured where the function graph notrace code, that would not trace a function and all its children is done by setting a NOTRACE flag when the function that is not to be traced is hit. There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used TRACE_GRAPH_NOTRACE. For example: # cd /sys/kernel/tracing # echo set_track_prepare stack_trace_save > set_graph_notrace # echo function_graph > current_tracer # cat trace [..] 0) | __slab_free() { 0) | free_to_partial_list() { 0) | arch_stack_walk() { 0) | __unwind_start() { 0) 0.501 us | get_stack_info(); Where a non filter trace looks like: # echo > set_graph_notrace # cat trace 0) | free_to_partial_list() { 0) | set_track_prepare() { 0) | stack_trace_save() { 0) | arch_stack_walk() { 0) | __unwind_start() { Where the filter should look like: # cat trace 0) | free_to_partial_list() { 0) | _raw_spin_lock_irqsave() { 0) 0.350 us | preempt_count_add(); 0) 0.351 us | do_raw_spin_lock(); 0) 2.440 us | } Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250208001511.535be150@batman.local.home Fixes: b8421489 ("function_graph: Move graph notrace bit to shadow stack global var") Signed-off-by:Steven Rostedt (Google) <rostedt@goodmis.org>
-
Sam Winchenbach authored
When a weak pull-up is present on the SDO line, regmap_update_bits fails to write both the SOFTRESET and SDOACTIVE bits because it incorrectly reads them as already set. Since the soft reset disables the SDO line, performing a read-modify-write operation on ADI_SPI_CONFIG_A to enable the SDO line doesn't make sense. This change directly writes to the register instead of using regmap_update_bits. Fixes: f34fe888 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by:
Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/SA1P110MB106904C961B0F3FAFFED74C0BCF5A@SA1P110MB1069.NAMP110.PROD.OUTLOOK.COM Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Nathan Chancellor authored
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which caused the kernel to move it to W=1 in commit 75b5ab13 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1") because there were numerous instances that would break builds with -Werror. Unfortunately, this is not a full solution, as more and more developers, subsystems, and distributors are building with W=1 as well, so they continue to see the numerous instances of this warning. Since the move to W=1, there have not been many new instances that have appeared through various build reports and the ones that have appeared seem to be following similar existing patterns, suggesting that most instances of this warning will not be real issues. The only alternatives for silencing this warning are adding casts (which is generally seen as an ugly practice) or refactoring the enums to macro defines or a unified enum (which may be undesirable because of type safety in other parts of the code). Move the warning to W=2, where warnings that occur frequently but may be relevant should reside. Cc: stable@vger.kernel.org Fixes: 75b5ab13 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1") Link: https://lore.kernel.org/ZwRA9SOcOjjLJcpi@google.com/ Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - Three DFS fixes: DFS mount fix, fix for noisy log msg and one to remove some unused code - SMB3 Lease fix * tag 'v6.14rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: change lease epoch type from unsigned int to __u16 smb: client: get rid of kstrdup() in get_ses_refpath() smb: client: fix noisy when tree connecting to DFS interlink targets smb: client: don't trust DFSREF_STORAGE_SERVER bit
-
- Feb 07, 2025
-
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just regular drm fixes, amdgpu, xe and i915 mostly, but a few scattered fixes. I think one of the i915 fixes fixes some build combos that Guenter was seeing. amdgpu: - Add new tiling flag for DCC write compress disable - Add BO metadata flag for DCC - Fix potential out of bounds access in display - Seamless boot fix - CONFIG_FRAME_WARN fix - PSR1 fix xe: - OA uAPI related fixes - Fix SRIOV migration initialization - Restore devcoredump to a sane state i915: - Fix the build error with clamp after WARN_ON on gcc 13.x+ - HDCP related fixes - PMU fix zero delta busyness issue - Fix page cleanup on DMA remap failure - Drop 64bpp YUV formats from ICL+ SDR planes - GuC log related fix - DisplayPort related fixes ivpu: - Fix error handling komeda: - add return check zynqmp: - fix locking in DP code ast: - fix AST DP timeout cec: - fix broken CEC adapter check" * tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel: (29 commits) drm/i915/dp: Fix potential infinite loop in 128b/132b SST Revert "drm/amd/display: Use HW lock mgr for PSR1" drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml files accel/amdxdna: Add MODULE_FIRMWARE() declarations drm/i915/dp: Iterate DSC BPP from high to low on all platforms drm/xe: Fix and re-enable xe_print_blob_ascii85() drm/xe/devcoredump: Move exec queue snapshot to Contexts section drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked drm/xe/pf: Fix migration initialization drm/xe/oa: Preserve oa_ctrl unused bits drm/amd/display: Fix seamless boot sequence drm/amd/display: Fix out-of-bound accesses drm/amdgpu: add a BO metadata flag to disable write compression for Vulkan drm/i915/backlight: Return immediately when scale() finds invalid parameters drm/i915/dp: Return min bpc supported by source instead of 0 drm/i915/dp: fix the Adaptive sync Operation mode for SDP drm/i915/guc: Debug print LRC state entries only if the context is pinned drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes drm/i915: Fix page cleanup on DMA remap failure drm/i915/pmu: Fix zero delta busyness issue ...
-
Linus Torvalds authored
Merge tag 'stable/for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull ibft fixes from Konrad Rzeszutek Wilk: "Two tiny fixes to IBFT code: one for Kconfig and another for IPv6" * tag 'stable/for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entry
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - MD pull request via Song: - fix an error handling path for md-linear - NVMe pull request via Keith: - Connection fixes for fibre channel transport (Daniel) - Endian fixes (Keith, Christoph) - Cleanup fix for host memory buffer (Francis) - Platform specific power quirks (Georg) - Target memory leak (Sagi) - Use appropriate controller state accessor (Daniel) - Fixup for a regression introduced last week, where sunvdc wasn't updated for an API change, causing compilation failures on sparc64. * tag 'block-6.14-20250207' of git://git.kernel.dk/linux: drivers/block/sunvdc.c: update the correct AIP call md: Fix linear_set_limits() nvme-fc: use ctrl state getter nvme: make nvme_tls_attrs_group static nvmet: add a missing endianess conversion in nvmet_execute_admin_connect nvmet: the result field in nvmet_alloc_ctrl_args is little endian nvmet: fix a memory leak in controller identify nvme-fc: do not ignore connectivity loss during connecting nvme: handle connectivity loss in nvme_set_queue_count nvme-fc: go straight to connecting state when initializing nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk nvme-pci: remove redundant dma frees in hmb nvmet: fix rw control endian access -
Avenger-285714 authored
While attempting to build a Debian packages with CC="ccache gcc", I saw the following error as builddeb builds linux-headers-$KERNELVERSION: make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts make[6]: *** No rule to make target 'gcc'. Stop. Upon investigation, it seems that one instance of $(CC) variable reference in ./scripts/package/install-extmod-build was missing quotation marks, causing the above error. Add the missing quotation marks around $(CC) to fix build. Fixes: 5f73e7d0 ("kbuild: refactor cross-compiling linux-headers package") Co-developed-by:
Mingcong Bai <jeffbai@aosc.io> Signed-off-by:
WangYuli <wangyuli@uniontech.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
