Commit ac920dae authored by Adam Jackson's avatar Adam Jackson 🎧

Prep for modular builds by adding guarded #include "config.h" everywhere.

parent f90f6616
......@@ -27,6 +27,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_accel.c,v 1.21 2004/01/02 20:22:17 dawes Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/*
* Reformatted with GNU indent (2.2.8), using the following options:
*
......
......@@ -27,6 +27,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_cursor.c,v 1.6 2002/09/11 00:29:31 dawes Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/*
* Reformatted with GNU indent (2.2.8), using the following options:
*
......
......@@ -34,7 +34,11 @@
* with <TAB> characters expanded at 8-column intervals.
*/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_dga.c,v 1.6 2003/02/26 04:19:36 dawes Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_dga.c,v 1.5 2002/09/11 00:29:31 dawes Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
......
......@@ -12,6 +12,10 @@
* with <TAB> characters expanded at 8-column intervals.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86_ansic.h"
......
......@@ -27,6 +27,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_driver.c,v 1.101 2004/01/02 20:15:47 dawes Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/*
* Reformatted with GNU indent (2.2.8), using the following options:
*
......
......@@ -34,6 +34,9 @@ THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_hwmc.c,v 1.3 2001/12/04 21:17:56 tsi Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
......
......@@ -24,7 +24,11 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_io.c,v 1.5 2002/09/11 00:29:32 dawes Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_io.c,v 1.4 2002/01/25 21:56:04 tsi Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/*
* Reformatted with GNU indent (2.2.8), using the following options:
......
......@@ -26,6 +26,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/*
* Reformatted with GNU indent (2.2.8), using the following options:
*
......
......@@ -34,6 +34,10 @@ THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* Matt Sottek <matthew.j.sottek@intel.com>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Resources.h"
......
......@@ -25,7 +25,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_wmark.c,v 1.8 2002/10/30 12:52:18 alanh Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810_wmark.c,v 1.7 2002/09/11 00:29:32 dawes Exp $ */
/*
* Reformatted with GNU indent (2.2.8), using the following options:
......@@ -45,6 +45,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* Keith Whitwell <keith@tungstengraphics.com>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "i810.h"
......
......@@ -2,6 +2,11 @@
* XXX So far, for GXxor this is about 40% of the speed of SW, but CPU
* utilisation falls from 95% to < 5%.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#ifndef DO_SCANLINE_IMAGE_WRITE
#define DO_SCANLINE_IMAGE_WRITE 0
#endif
......
......@@ -54,6 +54,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86_ansic.h"
......
......@@ -36,6 +36,10 @@
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i830_dga.c,v 1.2 2002/11/05 02:01:18 dawes Exp $ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86_ansic.h"
......
......@@ -58,6 +58,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* DHD 07/2002
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86_ansic.h"
......
......@@ -148,6 +148,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* - Add Intel(R) 945G support.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#ifndef PRINT_MODE_INFO
#define PRINT_MODE_INFO 0
#endif
......
......@@ -50,6 +50,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* Alan Hourihane <alanh@tungstengraphics.com>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_ansic.h"
#include "xf86_OSproc.h"
......
......@@ -34,6 +34,10 @@
* to support extended BIOS modes for the Intel chipsets
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_ansic.h"
#include "vbe.h"
......
......@@ -10,6 +10,10 @@
* Helmar Spangenberg <hspangenberg@frey.de> and Dima Dorfman
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "i830.h"
#include "shadowfb.h"
......
......@@ -60,6 +60,10 @@ THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* XXX Could support more formats.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Resources.h"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment