upower cannot get data from MGE usb ups
Submitted by Mat
Assigned to Richard Hughes @hughsient
Description
Created attachment 87756 upowerd -v output
Hello,
UPower does not reads the charge information from my ups.
It's a MGE (Eaton) protection center 675 usb.
The ups is not defective, nut reads the informations correctly from it.
With UPower, the state is always emty and percentage 0%.
upower -d
Device: /org/freedesktop/UPower/devices/ups_hiddev0 native-path: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/usbmisc/hiddev0 vendor: Eaton power supply: yes updated: Thu 01 Jan 1970 01:00:00 AM CET (1381952228 seconds ago) has history: yes has statistics: yes ups present: yes state: empty percentage: 0%
Daemon: daemon-version: 0.9.22 on-battery: no on-low-battery: no lid-is-closed: no lid-is-present: no is-docked: yes
I've attached the output of upowerd -v
it seems to fail reading data from the ups at coldplug, then does not get data:
Polling: /org/freedesktop/UPower/devices/ups_hiddev0 no data
Please tell me if I can give any more helpful informations.
Best regards.
Attachment 87756, "upowerd -v output":
upower.log