Commits (20896)

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.

......@@ -8,7 +8,6 @@ config.guess
......@@ -26,4 +25,71 @@ install-sh
# Meson
include: "https://gitlab.freedesktop.org/gstreamer/gst-ci/raw/master/gitlab/ci_template.yml"
[submodule "common"]
path = common
url = git://anongit.freedesktop.org/gstreamer/common
url = https://gitlab.freedesktop.org/gstreamer/common.git
......@@ -2,7 +2,7 @@
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
......@@ -305,7 +305,7 @@ the "copyright" line and a pointer to where the full notice is found.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
......@@ -2,7 +2,7 @@
Version 2, June 1991
Copyright (C) 1991 Free Software Foundation, Inc.
675 Mass Ave, Cambridge, MA 02139, USA
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
......@@ -464,7 +464,7 @@ convey the exclusion of warranty; and each file should have at least the
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
This diff is collapsed.
Basic Installation
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
Installation Names
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
`configure' recognizes the following options to control how it
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
Print a summary of the options to `configure', and exit.
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
/* GStreamer
* Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* Library General Public License for more details.
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
Disclaimer: The GStreamer team makes a real effort to make sure that
the information in this file is as up-to-date and accurate as possible.
However, this file may contain errors and omissions. Some dependant
libraries change their licensing from version-to-version and some of
the libraries listed here as LGPL were under the GPL license in
older releases. Distributions which include GStreamer are responsible
for ensuring that plugins are used in accordance with licensing terms
and other laws.
GStreamer is developed under the terms of the LGPL (see LICENSE file for details).
Some of our plugins however rely on libraries which are available under other
licenses. This means that if you are using an application which has a non-GPL
compatible license, for instance a closed-source application with GStreamer
you have to make sure not to use GPL linked or derived plugins. When using
GPL linked plugins GStreamer is for all practical reasons under the GPL itself.
The plugins which use a GPL library are as follows:
a52dec liba52 (http://liba52.sourceforge.net/)
aasink aalib (http://sourceforge.net/projects/aa-project/)
cdparanoia libcdparanoia (http://www.xiph.org/paranoia/)
dtsdec libdts (http://www.videolan.org/dtsdec.html)
dvdnavsrc libdvdnav (http://dvd.sourceforge.net/)
dxr3 (http://dxr3.sourceforge.net/)
icecastsend libshout (http://www.icecast.org)
mad libmad (http://www.mars.org/home/rob/proj/mpeg/)
mpeg2dec libmpeg2 (http://libmpeg2.sourceforge.net/)
mpeg2enc libmpeg2enc (http://mjpeg.sourceforge.net/)
mplex libmplex (http://mjpeg.sourceforge.net/)
siddec libsidplay 1.36 (http://www.geocities.com/SiliconValley/Lakes/5147/sidplay/,
trm libmusicbrainz (http://www.musicbrainz.org/)
xine libxine (http://xinehq.de/)
xvid libxvidcore (http://www.xvid.org/)
Plugins derived from GPL code are as follows:
dvdreadsrc libdvdread (http://www.dtek.chalmers.se/groups/dvd/)
jack libjack (http://jackit.sourceforge.net/)
Note libjack is LGPL, but plugin is GPL.
monoscope None (Algorithm by Ralph Loader, Joerg Walter,
Richard Boulton, and Andy Lo A Foe)
rtjpeg None (Erik Walthinsen's algorithm)
rtp None (http://www.linphone.org/ortp/)
synaesthesia (http://www.logarithmic.net/pfh/synaesthesia)
system_encode None (Algorithm by Chrisoph Moar, Wim Tayman's and
Erik Walthinsen)
vbidec None (Algorithm by Billy Biggs, Doug Bell,
Erik Walthinsen and David I. Lehn)
Plugins which use a LGPL library are as follows:
alsa alsa (http://alsa-project.org/)
artsdsink aRts (http://arts-project.org/)
cacasink libcaca (http://sam.zoy.org/projects/libcaca/)
colorspacelcs libcolorspace
dvdec libdv (http://libdv.sourceforge.net/)
esdmon,esdsink libesd (ftp.gnome.org/pub/GNOME/stable/sources/esound/)
faac libfaac (http://www.audiocoding.com/modules/mydownloads/)
fameenc libfame (http://fame.sourceforge.net/)
ffmpeg ffmpeg (http://ffmpeg.sourceforge.net/)
gdkpixbuf GTK+ (http://www.gtk.org/)
gnomevfs gnome-vfs (ftp.gnome.org//pub/GNOME/stable/sources/gnome-vfs/)
gst_arts aRts (http://arts-project.org/)
gst1394 libraw1394 (http://www.linux1394.org/)
gstaf libaudiofile (http://www.68k.org/~michael/audiofile/)
gstsf libsndfile (http://www.mega-nerd.com/libsndfile/)
hermescolorspace Hermes (http://www.clanlib.org/hermes/)
kio KDE (http://www.kde.org/)
ladspa (http://www.ladspa.org/)
lame libmp3lame (http://lame.sourceforge.net/)
libvisual libvisual (http://libvisual.sourceforge.net/)
matroska (http://www.matroska.org/)
mikmod libmikmod (http://mikmod.raphnet.net/)
ossaudio (http://www.opensound.com/)
rfbenc librfb
sdlvideosink libsdl (http://www.libsdl.org/)
shout2send libshout2 (http://www.icecast.org)
swfdec (http://swfdec.sourceforge.net/)
tarkin (http://svn.xiph.org/trunk/tarkin/)
textoverlay pango (http://www.pango.org/)
dirac (http://www.bbc.co.uk/rd/projects/dirac/)
effectv (Our ports was relicensed)(http://effectv.sourceforge.net/)
musepack (http://www.musepack.net/)
Plugins which use a BSD covered library are as follows:
ogg libogg/libvorbis (http://www.xiph.org/ogg/vorbis/)
vorbis libogg/libvorbis (http://www.xiph.org/ogg/vorbis/)
gsttheora libtheora (http://www.theora.org/)
speex (http://www.speex.org/)
flac libFLAC (http://flac.sourceforge.net/)
Plugins based on libraries with other free licenses:
ximagesink libXv
xvimagesink libXv
- license: MIT X11 / X Consortium license
gsm libgsm
- license MIT license http://kbs.cs.tu-berlin.de/~jutta/toast.html
festival (http://www.cstr.ed.ac.uk/projects/festival/)
- license: http://www.cstr.ed.ac.uk/projects/festival/freecopyright.shtml
jpeg (http://www.ijg.org/)
- license: IJG license
nas (http://radscan.com/nas.html)
- license: NAS license
snapshot libpng (http://www.libpng.org/pub/png/)
- license: PNG license
mngdec/mngenc libmng (http://gjuyn.xs4all.nl/libmng)
- license PNG license
Plugins using non-free libraries:
divxdec, divxenc (http://www.divx.com/)
osxaudio (http://www.apple.com/macosx/)
sunaudiosink (http://www.sun.com/)
faad libfaad (http://www.audiocoding.com/)
faad's license depends on its major version :
- for FAAD1 : it is LGPL
- for FAAD2 : it is GPL
look at these pages for more information on licenses :
by default, GStreamer faad plugin would compile against FAAD2 if available.
it falls back to FAAD1 if not.
GStreamer is currently maintained by the consensus of a number
of people, including, but not limited to:
David Schleef <ds@schleef.org>
Benjamin Otte <in7y118@public.uni-hamburg.de>
Ronald Bultje <rbultje@ronald.bitfreak.net>
Thomas Vander Stichele <thomas@apestaart.org>
Jan Schmidt <thaytan@noraisin.net>
Wim Taymans <wim.taymans@gmail.com>
David Schleef <ds@schleef.org>
Tim-Philipp Müller <tim centricular net>
Sebastian Dröge <slomo@coaxion.net>
Maintainer-related issues should be addressed to:
# disabled until it actually works
GCONF_DIR = gconf
gst-libs gst sys ext pkgconfig \
m4 common docs tests po tools
EXT_DIR = ext
gst gst-libs sys ext pkgconfig \
m4 common docs tests po tools
depcomp \