1. 02 Nov, 2017 1 commit
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  2. 31 Aug, 2017 1 commit
    • Bart Van Assche's avatar
      compat_hdio_ioctl: Fix a declaration · 8363dae2
      Bart Van Assche authored
      This patch avoids that sparse reports the following warning messages:
      
      block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces)
      block/compat_ioctl.c:85:11:    expected unsigned long *[noderef] <asn:1>p
      block/compat_ioctl.c:85:11:    got void [noderef] <asn:1>*
      block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces)
      block/compat_ioctl.c:91:21:    expected void const volatile [noderef] <asn:1>*<noident>
      block/compat_ioctl.c:91:21:    got unsigned long *[noderef] <asn:1>p
      block/compat_ioctl.c:87:53: warning: dereference of noderef expression
      block/compat_ioctl.c:91:21: warning: dereference of noderef expression
      
      Fixes: commit d597580d ("generic ...copy_..._user primitives")
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      8363dae2
  3. 24 Aug, 2017 1 commit
    • Bart Van Assche's avatar
      compat_hdio_ioctl: Fix a declaration · 6a934bb8
      Bart Van Assche authored
      This patch avoids that sparse reports the following warning messages:
      
      block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces)
      block/compat_ioctl.c:85:11:    expected unsigned long *[noderef] <asn:1>p
      block/compat_ioctl.c:85:11:    got void [noderef] <asn:1>*
      block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces)
      block/compat_ioctl.c:91:21:    expected void const volatile [noderef] <asn:1>*<noident>
      block/compat_ioctl.c:91:21:    got unsigned long *[noderef] <asn:1>p
      block/compat_ioctl.c:87:53: warning: dereference of noderef expression
      block/compat_ioctl.c:91:21: warning: dereference of noderef expression
      
      Fixes: commit d597580d ("generic ...copy_..._user primitives")
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6a934bb8
  4. 29 Jun, 2017 2 commits
  5. 08 Apr, 2017 1 commit
  6. 02 Feb, 2017 1 commit
  7. 04 Apr, 2016 1 commit
    • Kirill A. Shutemov's avatar
      mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros · 09cbfeaf
      Kirill A. Shutemov authored
      PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
      ago with promise that one day it will be possible to implement page
      cache with bigger chunks than PAGE_SIZE.
      
      This promise never materialized.  And unlikely will.
      
      We have many places where PAGE_CACHE_SIZE assumed to be equal to
      PAGE_SIZE.  And it's constant source of confusion on whether
      PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
      especially on the border between fs and mm.
      
      Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
      breakage to be doable.
      
      Let's stop pretending that pages in page cache are special.  They are
      not.
      
      The changes are pretty straight-forward:
      
       - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
      
       - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
      
       - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
      
       - page_cache_get() -> get_page();
      
       - page_cache_release() -> put_page();
      
      This patch contains automated changes generated with coccinelle using
      script below.  For some reason, coccinelle doesn't patch header files.
      I've called spatch for them manually.
      
      The only adjustment after coccinelle is revert of changes to
      PAGE_CAHCE_ALIGN definition: we are going to drop it later.
      
      There are few places in the code where coccinelle didn't reach.  I'll
      fix them manually in a separate patch.  Comments and documentation also
      will be addressed with the separate patch.
      
      virtual patch
      
      @@
      expression E;
      @@
      - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
      + E
      
      @@
      expression E;
      @@
      - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
      + E
      
      @@
      @@
      - PAGE_CACHE_SHIFT
      + PAGE_SHIFT
      
      @@
      @@
      - PAGE_CACHE_SIZE
      + PAGE_SIZE
      
      @@
      @@
      - PAGE_CACHE_MASK
      + PAGE_MASK
      
      @@
      expression E;
      @@
      - PAGE_CACHE_ALIGN(E)
      + PAGE_ALIGN(E)
      
      @@
      expression E;
      @@
      - page_cache_get(E)
      + get_page(E)
      
      @@
      expression E;
      @@
      - page_cache_release(E)
      + put_page(E)
      Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      09cbfeaf
  8. 08 Sep, 2014 1 commit
    • Tejun Heo's avatar
      block, bdi: an active gendisk always has a request_queue associated with it · ff9ea323
      Tejun Heo authored
      bdev_get_queue() returns the request_queue associated with the
      specified block_device.  blk_get_backing_dev_info() makes use of
      bdev_get_queue() to determine the associated bdi given a block_device.
      
      All the callers of bdev_get_queue() including
      blk_get_backing_dev_info() assume that bdev_get_queue() may return
      NULL and implement NULL handling; however, bdev_get_queue() requires
      the passed in block_device is opened and attached to its gendisk.
      Because an active gendisk always has a valid request_queue associated
      with it, bdev_get_queue() can never return NULL and neither can
      blk_get_backing_dev_info().
      
      Make it clear that neither of the two functions can return NULL and
      remove NULL handling from all the callers.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Chris Mason <clm@fb.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      ff9ea323
  9. 14 Jul, 2014 1 commit
  10. 01 Jul, 2014 1 commit
  11. 11 Sep, 2013 1 commit
    • Mathieu Desnoyers's avatar
      kernel-wide: fix missing validations on __get/__put/__copy_to/__copy_from_user() · 3ddc5b46
      Mathieu Desnoyers authored
      I found the following pattern that leads in to interesting findings:
      
        grep -r "ret.*|=.*__put_user" *
        grep -r "ret.*|=.*__get_user" *
        grep -r "ret.*|=.*__copy" *
      
      The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat,
      since those appear in compat code, we could probably expect the kernel
      addresses not to be reachable in the lower 32-bit range, so I think they
      might not be exploitable.
      
      For the "__get_user" cases, I don't think those are exploitable: the worse
      that can happen is that the kernel will copy kernel memory into in-kernel
      buffers, and will fail immediately afterward.
      
      The alpha csum_partial_copy_from_user() seems to be missing the
      access_ok() check entirely.  The fix is inspired from x86.  This could
      lead to information leak on alpha.  I also noticed that many architectures
      map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I
      wonder if the latter is performing the access checks on every
      architectures.
      Signed-off-by: default avatarMathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: Matt Turner <mattst88@gmail.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3ddc5b46
  12. 03 Jul, 2013 1 commit
  13. 11 Jan, 2012 1 commit
  14. 01 Jul, 2011 1 commit
    • Johannes Stezenbach's avatar
      compat_ioctl: fix warning caused by qemu · 390192b3
      Johannes Stezenbach authored
      On Linux x86_64 host with 32bit userspace, running
      qemu or even just "qemu-img create -f qcow2 some.img 1G"
      causes a kernel warning:
      
      ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
      ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img
      
      ioctl 00005326 is CDROM_DRIVE_STATUS,
      ioctl 801c0204 is FDGETPRM.
      
      The warning appears because the Linux compat-ioctl handler for these
      ioctls only applies to block devices, while qemu also uses the ioctls on
      plain files.
      Signed-off-by: default avatarJohannes Stezenbach <js@sig21.net>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarJens Axboe <jaxboe@fusionio.com>
      390192b3
  15. 17 Nov, 2010 1 commit
  16. 10 Nov, 2010 1 commit
  17. 12 Aug, 2010 1 commit
  18. 07 Aug, 2010 1 commit
  19. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  20. 03 Dec, 2009 1 commit
    • Martin K. Petersen's avatar
      block: Allow devices to indicate whether discarded blocks are zeroed · 98262f27
      Martin K. Petersen authored
      The discard ioctl is used by mkfs utilities to clear a block device
      prior to putting metadata down.  However, not all devices return zeroed
      blocks after a discard.  Some drives return stale data, potentially
      containing old superblocks.  It is therefore important to know whether
      discarded blocks are properly zeroed.
      
      Both ATA and SCSI drives have configuration bits that indicate whether
      zeroes are returned after a discard operation.  Implement a block level
      interface that allows this information to be bubbled up the stack and
      queried via a new block device ioctl.
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      98262f27
  21. 03 Oct, 2009 1 commit
  22. 22 May, 2009 2 commits
  23. 16 Apr, 2009 1 commit
  24. 29 Dec, 2008 1 commit
  25. 04 Dec, 2008 2 commits
  26. 23 Oct, 2008 1 commit
  27. 21 Oct, 2008 5 commits
  28. 09 Oct, 2008 1 commit
  29. 13 May, 2008 1 commit
  30. 17 Apr, 2008 1 commit
    • Bartlomiej Zolnierkiewicz's avatar
      ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3) · 93de00fd
      Bartlomiej Zolnierkiewicz authored
      hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
      and given the number of bugs we can assume that there are no real users:
      
      * DMA has no chance of working because DMA resources are released by
        ide_unregister() and they are never allocated again.
      
      * Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
        don't work for almost all hosts with "non-standard" (== non ISA-like)
        layout of IDE taskfile registers (there is a lot of such host drivers).
      
      * ide_port_init_devices() is not called when probing IDE devices so:
        - drive->autotune is never set and IDE host/devices are not programmed
          for the correct PIO/DMA transfer modes (=> possible data corruption)
        - host specific I/O 32-bit and IRQ unmasking settings are not applied
          (=> possible data corruption)
        - host specific ->port_init_devs method is not called (=> no luck with
          ht6560b, qd65xx and opti621 host drivers)
      
      * ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).
      
      * ->serialized flag is not preserved (=> possible data corruption when
         using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
         (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).
      
      * ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
        gayle and macide host drivers).
      
      * ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
        isn't initialized again (SiI3112 support needs them).
      
      * To issue an ioctl() there need to be at least one IDE device present
        in the system.
      
      * ->cable_detect method is not preserved + it is not called when probing
        IDE devices so cable detection is broken (however since DMA support is
        also broken it doesn't really matter ;-).
      
      * Some objects which may have already been freed in ide_unregister()
        are restored by ide_hwif_restore() (i.e. ->hwgroup).
      
      * ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
        slot cannot be found.
      
      * When IDE host drivers are modular unregistered port may be re-used by
        different host driver that owned it first causing subtle bugs.
      
      Since we now have a proper warm-plug support remove these ioctls,
      then remove no longer needed:
      - ide_register_hw() and ide_hwif_restore() functions
      - 'init_default' and 'restore' arguments of ide_unregister()
      - zeroeing of hwif->{dma,extra}_* fields in ide_unregister()
      
      As an added bonus IDE core code size shrinks by ~3kB (x86-32).
      
      v2:
      * fix ide_unregister() arguments in cleanup_module() (Andrew Morton).
      
      v3:
      * fix ide_unregister() arguments in palm_bk3710.c.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: Bartlomiej Zolnierkiewicz's avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
      93de00fd
  31. 28 Jan, 2008 1 commit
  32. 29 Oct, 2007 1 commit
  33. 10 Oct, 2007 1 commit