1. 18 Feb, 2018 1 commit
  2. 25 Jan, 2018 1 commit
    • Jia-Ju Bai's avatar
      ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command · eada8598
      Jia-Ju Bai authored
      After checking all possible call chains to it821x_firmware_command here,
      my tool finds that it821x_firmware_command
      is never called in atomic context,
      namely never in an interrupt handler or holding a spinlock.
      And it821x_firmware_command calls kmalloc(GFP_KERNEL),
      so it proves again that it821x_firmware_command
      can call functions which can sleep.
      Thus mdelay can be replaced with usleep_range to avoid busy wait.
      
      This is found by a static analysis tool named DCNS written by myself.
      Signed-off-by: default avatarJia-Ju Bai <baijiaju1990@gmail.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      eada8598
  3. 15 Oct, 2015 1 commit
  4. 10 May, 2014 1 commit
  5. 13 Feb, 2014 1 commit
  6. 03 Jun, 2013 1 commit
  7. 25 Jul, 2012 1 commit
    • Axel Lin's avatar
      ata: use module_pci_driver · 2fc75da0
      Axel Lin authored
      This patch converts the drivers in drivers/ata/* to use module_pci_driver()
      macro which makes the code smaller and a bit simpler.
      Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Mikael Pettersson <mikpe@it.uu.se>
      Cc: Mark Lord <kernel@teksavvy.com>
      Cc: Jeremy Higdon <jeremy@sgi.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      2fc75da0
  8. 23 Jul, 2011 2 commits
    • Jean Delvare's avatar
      pata_it821x: Fix RAID type display, by adding missing comma · 1c30c027
      Jean Delvare authored
      The missing comma causes the wrong RAID type to be displayed.
      Introduced by commit 963e4975 three
      years ago, odd that nobody noticed before.
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      1c30c027
    • Joe Perches's avatar
      ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level> · a9a79dfe
      Joe Perches authored
      Saves text by removing nearly duplicated text format strings by
      creating ata_<foo>_printk functions and printf extension %pV.
      
      ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
      
      Format string duplication comes from:
      
       #define ata_link_printk(link, lv, fmt, args...) do { \
             if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link)    \
                     printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id,   \
                            (link)->pmp , ##args); \
             else \
                     printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
             } while(0)
      
      Coalesce long formats.
      
      $ size drivers/ata/built-in.*
         text	   data	    bss	    dec	    hex	filename
       544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
       558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.allyesconfig.dev_level.o
       141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
       149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.defconfig.dev_level.o
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      a9a79dfe
  9. 02 Mar, 2011 1 commit
  10. 18 Oct, 2010 1 commit
  11. 25 May, 2010 1 commit
  12. 19 May, 2010 2 commits
    • Tejun Heo's avatar
      libata-sff: separate out BMDMA qc_issue · 360ff783
      Tejun Heo authored
      Separate out ata_bmdma_qc_issue() from ata_sff_qc_issue() such that
      ata_sff_qc_issue() only deals with non-BMDMA SFF protocols (PIO and
      nodata) while ata_bmdma_qc_issue() deals with the BMDMA protocols and
      uses ata_sff_qc_issue() for non-DMA commands.  All the users are
      updated accordingly.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      360ff783
    • Tejun Heo's avatar
      libata-sff: clean up BMDMA initialization · c7087652
      Tejun Heo authored
      When BMDMA initialization failed or BMDMA was not available for
      whatever reason, bmdma_addr was left at zero and used as an indication
      that BMDMA shouldn't be used.  This leads to the following problems.
      
      p1. For BMDMA drivers which don't use traditional BMDMA register,
          ata_bmdma_mode_filter() incorrectly inhibits DMA modes.  Those
          drivers either have to inherit from ata_sff_port_ops or clear
          ->mode_filter explicitly.
      
      p2. non-BMDMA drivers call into BMDMA PRD table allocation.  It
          doesn't actually allocate PRD table if bmdma_addr is not
          initialized but is still confusing.
      
      p3. For BMDMA drivers which don't use traditional BMDMA register, some
          methods might not be invoked as expected (e.g. bmdma_stop from
          ata_sff_post_internal_cmd()).
      
      p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
          worrying libata core might call into one of them.
      
      These problems are caused by the muddy line between SFF and BMDMA and
      the assumption that all BMDMA controllers initialize bmdma_addr.
      
      This patch fixes p1 and p2 by removing the bmdma_addr assumption and
      moving prd allocation to BMDMA port start.  Later patches will fix the
      remaining issues.
      
      This patch improves BMDMA initialization such that
      
      * When BMDMA register initialization fails, falls back to PIO instead
        of failing.  ata_pci_bmdma_init() never fails now.
      
      * When ata_pci_bmdma_init() falls back to PIO, it clears
        ap->mwdma_mask and udma_mask instead of depending on
        ata_bmdma_mode_filter().  This makes ata_bmdma_mode_filter()
        unnecessary thus resolving p1.
      
      * ata_port_start() which actually is BMDMA specific is moved to
        ata_bmdma_port_start().  ata_port_start() and ata_sff_port_start()
        are killed.
      
      * ata_sff_port_start32() is moved and renamed to
        ata_bmdma_port_start32().
      
      Drivers which no longer call into PRD table allocation are...
      
        pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
        drivers which inherit from ata_sff_port_ops.
      
      pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
      but is a BMDMA controller and doesn't have custom port_start like
      other such controllers.
      
      Note that with the previous patch which makes all and only BMDMA
      drivers inherit from ata_bmdma_port_ops, this change doesn't break
      drivers which need PRD table.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      c7087652
  13. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  14. 01 Mar, 2010 1 commit
  15. 03 Dec, 2009 1 commit
  16. 25 Mar, 2009 1 commit
  17. 25 Feb, 2009 1 commit
    • Ondrej Zary's avatar
      pata_it821x: resume from hibernation fails with RAID volume · 7ba07d16
      Ondrej Zary authored
      Hibernation didn't work for me since I started to use IT8212 controller.
      I did some debugging (booting with no_console_suspend init=/bin/sh).
      
      Found that resume fails (2.6.28) with "serial number mismatch 'some
      garbage' != 'some other garbage'" and "revalidation failed" messages.
      That's because the controller firmware fills different serial number in
      the IDENTIFY every boot.
      
      The patch below fixes the resume simply clearing the serial number.  The
      proper fix would be probably to fill in the serial number of the RAID
      volume instead.  I assume that there must be something like that stored on
      the drives but I don't know where.
      
      Fix resume on pata_it821x RAID volume by clearing the serial number in
      IDENTIFY data, which is otherwise different on each boot.
      Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
      Acked-by: Alan Cox Cox's avatarAlan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      7ba07d16
  18. 13 Jan, 2009 1 commit
  19. 29 Dec, 2008 1 commit
    • Tejun Heo's avatar
      libata: beef up iterators · 1eca4365
      Tejun Heo authored
      There currently are the following looping constructs.
      
      * __ata_port_for_each_link() for all available links
      * ata_port_for_each_link() for edge links
      * ata_link_for_each_dev() for all devices
      * ata_link_for_each_dev_reverse() for all devices in reverse order
      
      Now there's a need for looping construct which is similar to
      __ata_port_for_each_link() but iterates over PMP links before the host
      link.  Instead of adding another one with long name, do the following
      cleanup.
      
      * Implement and export ata_link_next() and ata_dev_next() which take
        @mode parameter and can be used to build custom loop.
      * Implement ata_for_each_link() and ata_for_each_dev() which take
        looping mode explicitly.
      
      The following iteration modes are implemented.
      
      * ATA_LITER_EDGE		: loop over edge links
      * ATA_LITER_HOST_FIRST		: loop over all links, host link first
      * ATA_LITER_PMP_FIRST		: loop over all links, PMP links first
      
      * ATA_DITER_ENABLED		: loop over enabled devices
      * ATA_DITER_ENABLED_REVERSE	: loop over enabled devices in reverse order
      * ATA_DITER_ALL			: loop over all devices
      * ATA_DITER_ALL_REVERSE		: loop over all devices in reverse order
      
      This change removes exlicit device enabledness checks from many loops
      and makes it clear which ones are iterated over in which direction.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      1eca4365
  20. 28 Oct, 2008 2 commits
  21. 22 Aug, 2008 1 commit
  22. 31 Jul, 2008 1 commit
    • Alan Cox Cox's avatar
      pata_it821x: Driver updates and reworking · 963e4975
      Alan Cox Cox authored
      - Add support for the RDC 1010 variant
      - Rework the core library to have a read_id method. This allows the hacky
        bits of it821x to go and prepares us for pata_hd
      - Switch from WARN to BUG in ata_id_string as it will reboot if you get
        it wrong so WARN won't be seen
      - Allow the issue of command 0xFC on the 821x. This is needed to query
        rebuild status.
      - Tidy up printk formatting
      - Do more ident rewriting on RAID volumes to handle firmware provided
        ident data which is rather wonky
      - Report the firmware revision and device layout in RAID mode
      - Don't try and disable raid on the 8211 or RDC - they don't have the
        relevant bits
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      963e4975
  23. 17 Apr, 2008 7 commits
    • Tejun Heo's avatar
      libata: rename SFF port ops · 5682ed33
      Tejun Heo authored
      Add sff_ prefix to SFF specific port ops.
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames ops and doesn't introduce any
      behavior difference.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      5682ed33
    • Tejun Heo's avatar
      libata: rename SFF functions · 9363c382
      Tejun Heo authored
      SFF functions have confusing names.  Some have sff prefix, some have
      bmdma, some std, some pci and some none.  Unify the naming by...
      
      * SFF functions which are common to both BMDMA and non-BMDMA are
        prefixed with ata_sff_.
      
      * SFF functions which are specific to BMDMA are prefixed with
        ata_bmdma_.
      
      * SFF functions which are specific to PCI but apply to both BMDMA and
        non-BMDMA are prefixed with ata_pci_sff_.
      
      * SFF functions which are specific to PCI and BMDMA are prefixed with
        ata_pci_bmdma_.
      
      * Drop generic prefixes from LLD specific routines.  For example,
        bfin_std_dev_select -> bfin_dev_select.
      
      The following renames are noteworthy.
      
        ata_qc_issue_prot() -> ata_sff_qc_issue()
        ata_pci_default_filter() -> ata_bmdma_mode_filter()
        ata_dev_try_classify() -> ata_sff_dev_classify()
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames functions and doesn't
      introduce any behavior difference.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      9363c382
    • Tejun Heo's avatar
      libata: stop overloading port_info->private_data · 887125e3
      Tejun Heo authored
      port_info->private_data is currently used for two purposes - to record
      private data about the port_info or to specify host->private_data to
      use when allocating ata_host.
      
      This overloading is confusing and counter-intuitive in that
      port_info->private_data becomes host->private_data instead of
      port->private_data.  In addition, port_info and host don't correspond
      to each other 1-to-1.  Currently, the first non-NULL
      port_info->private_data is used.
      
      This patch makes port_info->private_data just be what it is -
      private_data for the port_info where LLD can jot down extra info.
      libata no longer sets host->private_data to the first non-NULL
      port_info->private_data, @host_priv argument is added to
      ata_pci_init_one() instead.  LLDs which use ata_pci_init_one() can use
      this argument to pass in pointer to host private data.  LLDs which
      don't should use init-register model anyway and can initialize
      host->private_data directly.
      
      Adding @host_priv instead of using init-register model for LLDs which
      use ata_pci_init_one() is suggested by Alan Cox.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      887125e3
    • Tejun Heo's avatar
      libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht · 1bd5b715
      Tejun Heo authored
      ata_pci_init_one() is the only function which uses ops->irq_handler
      and pi->sht.  Other initialization functions take the same information
      as arguments.  This causes confusion and duplicate unused entries in
      structures.
      
      Make ata_pci_init_one() take sht as an argument and use ata_interrupt
      implicitly.  All current users use ata_interrupt and if different irq
      handler is necessary open coding ata_pci_init_one() using
      ata_prepare_sff_host() and ata_activate_sff_host can be done under ten
      lines including error handling and driver which requires custom
      interrupt handler is likely to require custom initialization anyway.
      
      As ata_pci_init_one() was the last user of ops->irq_handler, this
      patch also kills the field.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      1bd5b715
    • Tejun Heo's avatar
      libata: implement and use ops inheritance · 029cfd6b
      Tejun Heo authored
      libata lets low level drivers build ata_port_operations table and
      register it with libata core layer.  This allows low level drivers
      high level of flexibility but also burdens them with lots of
      boilerplate entries.
      
      This becomes worse for drivers which support related similar
      controllers which differ slightly.  They share most of the operations
      except for a few.  However, the driver still needs to list all
      operations for each variant.  This results in large number of
      duplicate entries, which is not only inefficient but also error-prone
      as it becomes very difficult to tell what the actual differences are.
      
      This duplicate boilerplates all over the low level drivers also make
      updating the core layer exteremely difficult and error-prone.  When
      compounded with multi-branched development model, it ends up
      accumulating inconsistencies over time.  Some of those inconsistencies
      cause immediate problems and fixed.  Others just remain there dormant
      making maintenance increasingly difficult.
      
      To rectify the problem, this patch implements ata_port_operations
      inheritance.  To allow LLDs to easily re-use their own ops tables
      overriding only specific methods, this patch implements poor man's
      class inheritance.  An ops table has ->inherits field which can be set
      to any ops table as long as it doesn't create a loop.  When the host
      is started, the inheritance chain is followed and any operation which
      isn't specified is taken from the nearest ancestor which has it
      specified.  This operation is called finalization and done only once
      per an ops table and the LLD doesn't have to do anything special about
      it other than making the ops table non-const such that libata can
      update it.
      
      libata provides four base ops tables lower drivers can inherit from -
      base, sata, pmp, sff and bmdma.  To avoid overriding these ops
      accidentaly, these ops are declared const and LLDs should always
      inherit these instead of using them directly.
      
      After finalization, all the ops table are identical before and after
      the patch except for setting .irq_handler to ata_interrupt in drivers
      which didn't use to.  The .irq_handler doesn't have any actual effect
      and the field will soon be removed by later patch.
      
      * sata_sx4 is still using old style EH and currently doesn't take
        advantage of ops inheritance.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      029cfd6b
    • Tejun Heo's avatar
      libata: implement and use SHT initializers · 68d1d07b
      Tejun Heo authored
      libata lets low level drivers build scsi_host_template and register it
      to the SCSI layer.  This allows low level drivers high level of
      flexibility but also burdens them with lots of boilerplate entries.
      
      This patch implements SHT initializers which can be used to initialize
      all the boilerplate entries in a sht.  Three variants of them are
      implemented - BASE, BMDMA and NCQ - for different types of drivers.
      Note that entries can be overriden by putting individual initializers
      after the helper macro.
      
      All sht tables are identical before and after this patch.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      68d1d07b
    • Tejun Heo's avatar
      libata: PCI device should be powered up before being accessed · f08048e9
      Tejun Heo authored
      PCI device should be powered up or powered up before its PCI regsiters
      are accessed.  Although PCI configuration register access is allowed
      in D3hot, PCI device is free to reset its status when transiting from
      D3hot to D0 causing configuration data to change.
      
      Many libata SFF drivers which use ata_pci_init_one() read and update
      configuration registers before calling ata_pci_init_one() which
      enables the PCI device.  Also, in resume paths, some drivers access
      registers without resuming the PCI device.
      
      This patch adds a call to pcim_enable_device() in init path if
      register is accessed before calling ata_pci_init_one() and make resume
      paths first resume PCI devices, access PCI configuration regiters then
      resume ATA host.
      
      While at it...
      
      * cmd640 was strange in that it set ->resume even when CONFIG_PM is
        not.  This is by-product of minimal build fix.  Updated.
      
      * In cs5530, Don't BUG() on reinit failure.  Just whine and fail
        resume.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      f08048e9
  24. 25 Mar, 2008 1 commit
  25. 23 Jan, 2008 1 commit
    • Alan Cox Cox's avatar
      libata/pata_it821x: Improve handling of poorly compatible emulations · c5038fc0
      Alan Cox Cox authored
      Some it821x RAID firmwares return 0 for the err return off both devices.
      A similar issue occurs with the slave returning 0 not 1 if you plug a
      gigabyte sata ramdisk into a controller that fakes two SATA ports as
      master/slave on an SFF channel.
      
      The patch does the following
      
      - Allow the 'failed diagnostics' case on both master and slave
      - Move the HORKAGE_DIAGNOSTIC check after ->dev_config
      
      This second change also allows IT821x to fix up a problem where we report
      drive diagnostic failures when in fact the drive is fine but the
      microcontroller firmware doesn't appear to get it right. IT821x clears
      the flag again to avoid giving the user bogus warnings about their disk.
      
      The other IT821x change is a bit ugly, we slightly abuse the cable type
      hook to fiddle with the identify data for the devices. We could add a new
      hook for this but as we have only one offender and no more seeming likely
      it seems better to keep libata-core clean.
      
      Please let this sit in -mm briefly, just in case the relaxed checking
      breaks some other emulated interface.
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      c5038fc0
  26. 19 Oct, 2007 1 commit
  27. 12 Oct, 2007 5 commits