1. 08 Apr, 2015 1 commit
    • Quentin Lambert's avatar
      ata: remove deprecated use of pci api · c54c719b
      Quentin Lambert authored
      Replace occurences of the pci api by appropriate call to the dma api.
      
      A simplified version of the semantic patch that finds this problem is as
      follows: (http://coccinelle.lip6.fr)
      
      @deprecated@
      idexpression id;
      position p;
      @@
      
      (
        pci_dma_supported@p ( id, ...)
      |
        pci_alloc_consistent@p ( id, ...)
      )
      
      @bad1@
      idexpression id;
      position deprecated.p;
      @@
      ...when != &id->dev
         when != pci_get_drvdata ( id )
         when != pci_enable_device ( id )
      (
        pci_dma_supported@p ( id, ...)
      |
        pci_alloc_consistent@p ( id, ...)
      )
      
      @depends on !bad1@
      idexpression id;
      expression direction;
      position deprecated.p;
      @@
      
      (
      - pci_dma_supported@p ( id,
      + dma_supported ( &id->dev,
      ...
      + , GFP_ATOMIC
        )
      |
      - pci_alloc_consistent@p ( id,
      + dma_alloc_coherent ( &id->dev,
      ...
      + , GFP_ATOMIC
        )
      )
      Signed-off-by: default avatarQuentin Lambert <lambert.quentin@gmail.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      c54c719b
  2. 10 May, 2014 1 commit
  3. 13 Feb, 2014 1 commit
  4. 03 Jun, 2013 1 commit
  5. 03 Jan, 2013 1 commit
    • Greg Kroah-Hartman's avatar
      Drivers: ata: remove __dev* attributes. · 0ec24914
      Greg Kroah-Hartman authored
      CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
      markings need to be removed.
      
      This change removes the use of __devinit, __devexit_p, __devinitdata,
      and __devexit from these drivers.
      
      Based on patches originally written by Bill Pemberton, but redone by me
      in order to handle some of the coding style issues better, by hand.
      
      Cc: Bill Pemberton <wfp5p@virginia.edu>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Viresh Kumar <viresh.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0ec24914
  6. 25 Jul, 2012 1 commit
    • Axel Lin's avatar
      ata: use module_pci_driver · 2fc75da0
      Axel Lin authored
      This patch converts the drivers in drivers/ata/* to use module_pci_driver()
      macro which makes the code smaller and a bit simpler.
      Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
      Cc: Alan Cox <alan@linux.intel.com>
      Cc: Jeff Garzik <jgarzik@pobox.com>
      Cc: Mikael Pettersson <mikpe@it.uu.se>
      Cc: Mark Lord <kernel@teksavvy.com>
      Cc: Jeremy Higdon <jeremy@sgi.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      2fc75da0
  7. 23 Jul, 2011 1 commit
    • Joe Perches's avatar
      ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>( · a44fec1f
      Joe Perches authored
      Saves a bit of text as the call takes fewer args.
      
      Coalesce a few formats.
      Convert a few bare printks to pr_cont.
      
      $ size drivers/ata/built-in.o*
         text	   data	    bss	    dec	    hex	filename
       558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.o.allyesconfig.new
       559574	  73893	 117888	 751355	  b76fb	drivers/ata/built-in.o.allyesconfig.old
       149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.o.defconfig.new
       149851	  14689	   4220	 168760	  29338	drivers/ata/built-in.o.defconfig.old
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
      a44fec1f
  8. 31 Mar, 2011 1 commit
  9. 25 May, 2010 1 commit
    • Tejun Heo's avatar
      libata-sff: separate out BMDMA irq handler · c3b28894
      Tejun Heo authored
      Separate out BMDMA irq handler from SFF irq handler.  The misnamed
      host_intr() functions are renamed to ata_sff_port_intr() and
      ata_bmdma_port_intr().  Common parts are factored into
      __ata_sff_port_intr() and __ata_sff_interrupt() and used by sff and
      bmdma interrupt routines.
      
      All BMDMA drivers now use ata_bmdma_interrupt() or
      ata_bmdma_port_intr() while all non-BMDMA SFF ones use
      ata_sff_interrupt() or ata_sff_port_intr().
      
      For now, ata_pci_sff_init_one() uses ata_bmdma_interrupt() as it's
      used by both SFF and BMDMA drivers.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      c3b28894
  10. 19 May, 2010 1 commit
  11. 03 Dec, 2009 1 commit
  12. 07 Apr, 2009 1 commit
  13. 25 Mar, 2009 1 commit
  14. 17 Apr, 2008 5 commits
    • Tejun Heo's avatar
      libata: rename SFF functions · 9363c382
      Tejun Heo authored
      SFF functions have confusing names.  Some have sff prefix, some have
      bmdma, some std, some pci and some none.  Unify the naming by...
      
      * SFF functions which are common to both BMDMA and non-BMDMA are
        prefixed with ata_sff_.
      
      * SFF functions which are specific to BMDMA are prefixed with
        ata_bmdma_.
      
      * SFF functions which are specific to PCI but apply to both BMDMA and
        non-BMDMA are prefixed with ata_pci_sff_.
      
      * SFF functions which are specific to PCI and BMDMA are prefixed with
        ata_pci_bmdma_.
      
      * Drop generic prefixes from LLD specific routines.  For example,
        bfin_std_dev_select -> bfin_dev_select.
      
      The following renames are noteworthy.
      
        ata_qc_issue_prot() -> ata_sff_qc_issue()
        ata_pci_default_filter() -> ata_bmdma_mode_filter()
        ata_dev_try_classify() -> ata_sff_dev_classify()
      
      This rename is in preparation of separating SFF support out of libata
      core layer.  This patch strictly renames functions and doesn't
      introduce any behavior difference.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      9363c382
    • Tejun Heo's avatar
      libata: implement and use ops inheritance · 029cfd6b
      Tejun Heo authored
      libata lets low level drivers build ata_port_operations table and
      register it with libata core layer.  This allows low level drivers
      high level of flexibility but also burdens them with lots of
      boilerplate entries.
      
      This becomes worse for drivers which support related similar
      controllers which differ slightly.  They share most of the operations
      except for a few.  However, the driver still needs to list all
      operations for each variant.  This results in large number of
      duplicate entries, which is not only inefficient but also error-prone
      as it becomes very difficult to tell what the actual differences are.
      
      This duplicate boilerplates all over the low level drivers also make
      updating the core layer exteremely difficult and error-prone.  When
      compounded with multi-branched development model, it ends up
      accumulating inconsistencies over time.  Some of those inconsistencies
      cause immediate problems and fixed.  Others just remain there dormant
      making maintenance increasingly difficult.
      
      To rectify the problem, this patch implements ata_port_operations
      inheritance.  To allow LLDs to easily re-use their own ops tables
      overriding only specific methods, this patch implements poor man's
      class inheritance.  An ops table has ->inherits field which can be set
      to any ops table as long as it doesn't create a loop.  When the host
      is started, the inheritance chain is followed and any operation which
      isn't specified is taken from the nearest ancestor which has it
      specified.  This operation is called finalization and done only once
      per an ops table and the LLD doesn't have to do anything special about
      it other than making the ops table non-const such that libata can
      update it.
      
      libata provides four base ops tables lower drivers can inherit from -
      base, sata, pmp, sff and bmdma.  To avoid overriding these ops
      accidentaly, these ops are declared const and LLDs should always
      inherit these instead of using them directly.
      
      After finalization, all the ops table are identical before and after
      the patch except for setting .irq_handler to ata_interrupt in drivers
      which didn't use to.  The .irq_handler doesn't have any actual effect
      and the field will soon be removed by later patch.
      
      * sata_sx4 is still using old style EH and currently doesn't take
        advantage of ops inheritance.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      029cfd6b
    • Tejun Heo's avatar
      libata: implement and use SHT initializers · 68d1d07b
      Tejun Heo authored
      libata lets low level drivers build scsi_host_template and register it
      to the SCSI layer.  This allows low level drivers high level of
      flexibility but also burdens them with lots of boilerplate entries.
      
      This patch implements SHT initializers which can be used to initialize
      all the boilerplate entries in a sht.  Three variants of them are
      implemented - BASE, BMDMA and NCQ - for different types of drivers.
      Note that entries can be overriden by putting individual initializers
      after the helper macro.
      
      All sht tables are identical before and after this patch.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      68d1d07b
    • Tejun Heo's avatar
      libata: normalize port_info, port_operations and sht tables · 6bd99b4e
      Tejun Heo authored
      Over the time, port info, ops and sht structures developed quite a bit
      of inconsistencies.  This patch updates drivers.
      
      * Enable/disable_pm callbacks added to all ahci ops tables.
      
      * Every driver for SFF controllers now uses ata_sff_port_start()
        instead of ata_port_start() unless the driver has custom
        implementation.
      
      * Every driver for SFF controllers now uses ata_pci_default_filter()
        unless the driver has custom implementation.
      
      * Removed an odd port_info->sht initialization from ata_piix.c.
        Likely a merge byproduct.
      
      * A port which has ATA_FLAG_SATA set doesn't need to set cable_detect
        to ata_cable_sata().  Remove it from via and mv port ops.
      
      * Some drivers had unnecessary .max_sectors initialization which is
        ignored and was missing .slave_destroy callback.  Fixed.
      
      * Removed unnecessary sht initializations port_info's.
      
      * Removed onsolete scsi device suspend/resume callbacks from
        pata_bf54x.
      
      * No reason to set ata_pci_default_filter() and bmdma functions for
        PIO-only drivers.  Remove those callbacks and replace
        ata_bmdma_irq_clear with ata_noop_irq_clear.
      
      * pata_platform sets port_start to ata_dummy_ret0.  port_start can
        just be set to NULL.
      
      * sata_fsl supports NCQ but was missing qc_defer.  Fixed.
      
      * pata_rb600_cf implements dummy port_start.  Removed.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      6bd99b4e
    • Tejun Heo's avatar
      libata: PCI device should be powered up before being accessed · f08048e9
      Tejun Heo authored
      PCI device should be powered up or powered up before its PCI regsiters
      are accessed.  Although PCI configuration register access is allowed
      in D3hot, PCI device is free to reset its status when transiting from
      D3hot to D0 causing configuration data to change.
      
      Many libata SFF drivers which use ata_pci_init_one() read and update
      configuration registers before calling ata_pci_init_one() which
      enables the PCI device.  Also, in resume paths, some drivers access
      registers without resuming the PCI device.
      
      This patch adds a call to pcim_enable_device() in init path if
      register is accessed before calling ata_pci_init_one() and make resume
      paths first resume PCI devices, access PCI configuration regiters then
      resume ATA host.
      
      While at it...
      
      * cmd640 was strange in that it set ->resume even when CONFIG_PM is
        not.  This is by-product of minimal build fix.  Updated.
      
      * In cs5530, Don't BUG() on reinit failure.  Just whine and fail
        resume.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      f08048e9
  15. 01 Feb, 2008 1 commit
  16. 23 Jan, 2008 1 commit
  17. 12 Oct, 2007 5 commits
    • Jeff Garzik's avatar
      [libata] struct pci_dev related cleanups · 2855568b
      Jeff Garzik authored
      * remove pointless pci_dev_to_dev() wrapper.  Just directly reference
        the embedded struct device like everyone else does.
      
      * pata_cs5520: delete cs5520_remove_one(), it was a duplicate of
        ata_pci_remove_one()
      
      * linux/libata.h: don't bother including linux/pci.h, we don't need it.
        Simply declare 'struct pci_dev' and assume interested parties will
        include the header, as they should be doing anyway.
      
      * linux/libata.h: consolidate all CONFIG_PCI declarations into a
        single location in the header.
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      2855568b
    • Tejun Heo's avatar
      libata: implement and use ata_port_desc() to report port configuration · cbcdd875
      Tejun Heo authored
      Currently, port configuration reporting has the following problems.
      
      * iomapped address is reported instead of raw address
      * report contains irrelevant fields or lacks necessary fields for
        non-SFF controllers.
      * host->irq/irq2 are there just for reporting and hacky.
      
      This patch implements and uses ata_port_desc() and
      ata_port_pbar_desc().  ata_port_desc() is almost identical to
      ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
      locking requirement, can only be used during host initialization and "
      " is used as separator instead of ", ".  ata_port_pbar_desc() is a
      helper to ease reporting of a PCI BAR or an offsetted address into it.
      
      LLD pushes whatever description it wants using the above two
      functions.  The accumulated description is printed on host
      registration after "[S/P]ATA max MAX_XFERMODE ".
      
      SFF init helpers and ata_host_activate() automatically add
      descriptions for addresses and irq respectively, so only LLDs which
      isn't standard SFF need to add custom descriptions.  In many cases,
      such controllers need to report different things anyway.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      cbcdd875
    • Alan Cox Cox's avatar
      libata: Switch most of the remaining SFF drivers to ata_sff_port_start · 81ad1837
      Alan Cox Cox authored
      This avoids allocating DMA buffers if not needed but at the moment is
      mostly just a neatness item.
      Signed-off-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      81ad1837
    • Jeff Garzik's avatar
      [libata] Remove ->port_disable() hook · ac8869d5
      Jeff Garzik authored
      It was always set to ata_port_disable().  Removed the hook, and replaced
      the very few ap->ops->port_disable() callsites with direct calls to
      ata_port_disable().
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      ac8869d5
    • Jeff Garzik's avatar
      [libata] Remove ->irq_ack() hook, and ata_dummy_irq_on() · 6d32d30f
      Jeff Garzik authored
      * ->irq_ack() is redundant to what the irq handler already
        performs... chk-status + irq-clear.  Furthermore, it is only
        called in one place, when screaming-irq-debugging is enabled,
        so we don't want to bother with a hook just for that.
      
      * ata_dummy_irq_on() is only ever used in drivers that have
        no callpath reaching ->irq_on().  Remove .irq_on hook from
        those drivers, and the now-unused ata_dummy_irq_on()
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      6d32d30f
  18. 31 Aug, 2007 1 commit
  19. 20 Jul, 2007 1 commit
  20. 09 Jul, 2007 1 commit
  21. 03 Jul, 2007 1 commit
    • Tejun Heo's avatar
      libata: fix assigned IRQ reporting · 4031826b
      Tejun Heo authored
      host->irq and host->irq2 should be set before ata_host_register() for
      IRQ reporting to work.  Move up host->irq assignment in
      ata_host_activate() and add it to ata_pci_init_one() native path and
      pata_cs5520.
      
      The port info printing in ata_host_register() doesn't fit all the
      different controllers.  It should probably be moved out to LLDs with
      some helpers in the future.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      4031826b
  22. 22 May, 2007 1 commit
  23. 11 May, 2007 1 commit
    • Tejun Heo's avatar
      libata: reimplement suspend/resume support using sdev->manage_start_stop · 9666f400
      Tejun Heo authored
      Reimplement suspend/resume support using sdev->manage_start_stop.
      
      * Device suspend/resume is now SCSI layer's responsibility and the
        code is simplified a lot.
      
      * DPM is dropped.  This also simplifies code a lot.  Suspend/resume
        status is port-wide now.
      
      * ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
      
      * Resume now has to wait for disk to spin up before proceeding.  I
        couldn't find easy way out as libata is in EH waiting for the
        disk to be ready and sd is waiting for EH to complete to issue
        START_STOP.
      
      * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
        This fixes spindown on shutdown and suspend-to-disk.
      Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
      Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
      9666f400
  24. 28 Apr, 2007 2 commits
  25. 14 Mar, 2007 1 commit
  26. 02 Mar, 2007 2 commits
  27. 26 Feb, 2007 2 commits
  28. 21 Feb, 2007 1 commit
  29. 09 Feb, 2007 1 commit