Commit c71bcdcb authored by Ajay Gupta's avatar Ajay Gupta Committed by Wolfram Sang

i2c: add i2c bus driver for NVIDIA GPU

Latest NVIDIA GPU card has USB Type-C interface. There is a
Type-C controller which can be accessed over I2C.

This driver adds I2C bus driver to communicate with Type-C controller.
I2C client driver will be part of USB Type-C UCSI driver.
Signed-off-by: default avatarAjay Gupta <ajayg@nvidia.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: kept Makefile sorting]
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 848bd3f3
Kernel driver i2c-nvidia-gpu
Datasheet: not publicly available.
Authors:
Ajay Gupta <ajayg@nvidia.com>
Description
-----------
i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing
and later GPUs and it is used to communicate with Type-C controller on GPUs.
If your 'lspci -v' listing shows something like the following,
01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1)
then this driver should support the I2C controller of your GPU.
......@@ -6861,6 +6861,13 @@ L: linux-acpi@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-core-acpi.c
I2C CONTROLLER DRIVER FOR NVIDIA GPU
M: Ajay Gupta <ajayg@nvidia.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-nvidia-gpu
F: drivers/i2c/busses/i2c-nvidia-gpu.c
I2C MUXES
M: Peter Rosin <peda@axentia.se>
L: linux-i2c@vger.kernel.org
......
......@@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985
This driver can also be built as a module. If so, the module
will be called i2c-nforce2-s4985.
config I2C_NVIDIA_GPU
tristate "NVIDIA GPU I2C controller"
depends on PCI
help
If you say yes to this option, support will be included for the
NVIDIA GPU I2C controller which is used to communicate with the GPU's
Type-C controller. This driver can also be built as a module called
i2c-nvidia-gpu.
config I2C_SIS5595
tristate "SiS 5595"
depends on PCI
......
......@@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Nvidia GPU I2C controller Driver
*
* Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
* Author: Ajay Gupta <ajayg@nvidia.com>
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <asm/unaligned.h>
/* I2C definitions */
#define I2C_MST_CNTL 0x00
#define I2C_MST_CNTL_GEN_START BIT(0)
#define I2C_MST_CNTL_GEN_STOP BIT(1)
#define I2C_MST_CNTL_CMD_READ (1 << 2)
#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
#define I2C_MST_CNTL_GEN_NACK BIT(28)
#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
#define I2C_MST_ADDR 0x04
#define I2C_MST_I2C0_TIMING 0x08
#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
#define I2C_MST_DATA 0x0c
#define I2C_MST_HYBRID_PADCTL 0x20
#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14)
#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15)
struct gpu_i2c_dev {
struct device *dev;
void __iomem *regs;
struct i2c_adapter adapter;
struct i2c_board_info *gpu_ccgx_ucsi;
};
static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
{
u32 val;
/* enable I2C */
val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
/* enable 100KHZ mode */
val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
<< I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
}
static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
{
unsigned long target = jiffies + msecs_to_jiffies(1000);
u32 val;
do {
val = readl(i2cd->regs + I2C_MST_CNTL);
if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
break;
if ((val & I2C_MST_CNTL_STATUS) !=
I2C_MST_CNTL_STATUS_BUS_BUSY)
break;
usleep_range(500, 600);
} while (time_is_after_jiffies(target));
if (time_is_before_jiffies(target)) {
dev_err(i2cd->dev, "i2c timeout error %x\n", val);
return -ETIME;
}
val = readl(i2cd->regs + I2C_MST_CNTL);
switch (val & I2C_MST_CNTL_STATUS) {
case I2C_MST_CNTL_STATUS_OKAY:
return 0;
case I2C_MST_CNTL_STATUS_NO_ACK:
return -EIO;
case I2C_MST_CNTL_STATUS_TIMEOUT:
return -ETIME;
default:
return 0;
}
}
static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
{
int status;
u32 val;
val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
(len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
writel(val, i2cd->regs + I2C_MST_CNTL);
status = gpu_i2c_check_status(i2cd);
if (status < 0)
return status;
val = readl(i2cd->regs + I2C_MST_DATA);
switch (len) {
case 1:
data[0] = val;
break;
case 2:
put_unaligned_be16(val, data);
break;
case 3:
put_unaligned_be16(val >> 8, data);
data[2] = val;
break;
case 4:
put_unaligned_be32(val, data);
break;
default:
break;
}
return status;
}
static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
{
writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
return gpu_i2c_check_status(i2cd);
}
static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
{
writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
return gpu_i2c_check_status(i2cd);
}
static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
{
u32 val;
writel(data, i2cd->regs + I2C_MST_DATA);
val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
writel(val, i2cd->regs + I2C_MST_CNTL);
return gpu_i2c_check_status(i2cd);
}
static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
int status, status2;
int i, j;
/*
* The controller supports maximum 4 byte read due to known
* limitation of sending STOP after every read.
*/
for (i = 0; i < num; i++) {
if (msgs[i].flags & I2C_M_RD) {
/* program client address before starting read */
writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
/* gpu_i2c_read has implicit start */
status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
if (status < 0)
goto stop;
} else {
u8 addr = i2c_8bit_addr_from_msg(msgs + i);
status = gpu_i2c_start(i2cd);
if (status < 0) {
if (i == 0)
return status;
goto stop;
}
status = gpu_i2c_write(i2cd, addr);
if (status < 0)
goto stop;
for (j = 0; j < msgs[i].len; j++) {
status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
if (status < 0)
goto stop;
}
}
}
status = gpu_i2c_stop(i2cd);
if (status < 0)
return status;
return i;
stop:
status2 = gpu_i2c_stop(i2cd);
if (status2 < 0)
dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
return status;
}
static const struct i2c_adapter_quirks gpu_i2c_quirks = {
.max_read_len = 4,
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
};
static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm gpu_i2c_algorithm = {
.master_xfer = gpu_i2c_master_xfer,
.functionality = gpu_i2c_functionality,
};
/*
* This driver is for Nvidia GPU cards with USB Type-C interface.
* We want to identify the cards using vendor ID and class code only
* to avoid dependency of adding product id for any new card which
* requires this driver.
* Currently there is no class code defined for UCSI device over PCI
* so using UNKNOWN class for now and it will be updated when UCSI
* over PCI gets a class code.
* There is no other NVIDIA cards with UNKNOWN class code. Even if the
* driver gets loaded for an undesired card then eventually i2c_read()
* (initiated from UCSI i2c_client) will timeout or UCSI commands will
* timeout.
*/
#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
static const struct pci_device_id gpu_i2c_ids[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
{ }
};
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
struct i2c_client *ccgx_client;
i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
sizeof(*i2cd->gpu_ccgx_ucsi),
GFP_KERNEL);
if (!i2cd->gpu_ccgx_ucsi)
return -ENOMEM;
strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
if (!ccgx_client)
return -ENODEV;
return 0;
}
static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct gpu_i2c_dev *i2cd;
int status;
i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
if (!i2cd)
return -ENOMEM;
i2cd->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, i2cd);
status = pcim_enable_device(pdev);
if (status < 0) {
dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
return status;
}
pci_set_master(pdev);
i2cd->regs = pcim_iomap(pdev, 0, 0);
if (!i2cd->regs) {
dev_err(&pdev->dev, "pcim_iomap failed\n");
return -ENOMEM;
}
status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
if (status < 0) {
dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
return status;
}
gpu_enable_i2c_bus(i2cd);
i2c_set_adapdata(&i2cd->adapter, i2cd);
i2cd->adapter.owner = THIS_MODULE;
strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
sizeof(i2cd->adapter.name));
i2cd->adapter.algo = &gpu_i2c_algorithm;
i2cd->adapter.quirks = &gpu_i2c_quirks;
i2cd->adapter.dev.parent = &pdev->dev;
status = i2c_add_adapter(&i2cd->adapter);
if (status < 0)
goto free_irq_vectors;
status = gpu_populate_client(i2cd, pdev->irq);
if (status < 0) {
dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
goto del_adapter;
}
return 0;
del_adapter:
i2c_del_adapter(&i2cd->adapter);
free_irq_vectors:
pci_free_irq_vectors(pdev);
return status;
}
static void gpu_i2c_remove(struct pci_dev *pdev)
{
struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
i2c_del_adapter(&i2cd->adapter);
pci_free_irq_vectors(pdev);
}
static int gpu_i2c_resume(struct device *dev)
{
struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
gpu_enable_i2c_bus(i2cd);
return 0;
}
UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL);
static struct pci_driver gpu_i2c_driver = {
.name = "nvidia-gpu",
.id_table = gpu_i2c_ids,
.probe = gpu_i2c_probe,
.remove = gpu_i2c_remove,
.driver = {
.pm = &gpu_i2c_driver_pm,
},
};
module_pci_driver(gpu_i2c_driver);
MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment