Commit b1f9e5e3 authored by Lorenzo Pieralisi's avatar Lorenzo Pieralisi Committed by Bjorn Helgaas

ide: fix IRQ assignment for PCI bus order probing

We used to assign IRQs for all devices at boot-time, before any drivers
claimed devices.  The following commits:

  30fdfb92 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
  0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")

changed this so we now call pci_assign_irq() from pci_device_probe() when
we call a driver's probe method.

The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses
pci_device_probe() so it can guarantee devices are claimed in order of PCI
bus address.  It calls the driver's probe method directly, so it misses the
pci_assign_irq() call (and other PCI initialization functions), which
causes failures like this:

  ide0: disabled, no IRQ
  ide0: failed to initialize IDE interface
  ide0: disabling port
  cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
  CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io  0x8050-0x8057]
  cmd64x 0000:00:02.0: can't reserve resources
  CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
  ide_generic: please use "probe_mask=0x3f" module parameter for probing
  all legacy ISA IDE ports
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
  sysfs: cannot create duplicate filename '/class/ide_port/ide0'

  [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
  [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
  [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
  [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
  [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
  [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
  [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
  [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
  [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
  [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
  [<fffffc00005ba690>] device_create+0x50/0x70
  [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
  [<fffffc00005df330>] ide_host_register+0x450/0xa00
  [<fffffc00005ba2a0>] device_register+0x20/0x50
  [<fffffc00005df330>] ide_host_register+0x450/0xa00
  [<fffffc00005df944>] ide_host_add+0x64/0xe0
  [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
  [<fffffc0000310288>] do_one_initcall+0x68/0x260
  [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
  ---[ end trace 24a70433c3e4d374 ]---
  ide0: disabling port

Fix the IRQ allocation issue by calling pci_assign_irq() from
ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a
given PCI device are allocated for the IDE PCI drivers to use them for
device configuration.

Fixes: 30fdfb92 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: default avatarGuenter Roeck <>
Tested-by: default avatarGuenter Roeck <>
Signed-off-by: default avatarLorenzo Pieralisi <>
[bhelgaas: changelog]
Signed-off-by: default avatarBjorn Helgaas <>
Reviewed-by: default avatarBartlomiej Zolnierkiewicz <>
Acked-by: default avatarDavid S. Miller <>
Cc: Richard Henderson <>
Cc: Ivan Kokshaysky <>
Cc: Matt Turner <>
parent a06876a7
......@@ -56,6 +56,7 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
struct list_head *l;
struct pci_driver *d;
int ret;
list_for_each(l, &ide_pci_drivers) {
d = list_entry(l, struct pci_driver, node);
......@@ -63,10 +64,14 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
const struct pci_device_id *id =
pci_match_id(d->id_table, dev);
if (id != NULL && d->probe(dev, id) >= 0) {
dev->driver = d;
return 1;
if (id != NULL) {
ret = d->probe(dev, id);
if (ret >= 0) {
dev->driver = d;
return 1;
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment