Commit 5c34a4e8 authored by Linus Walleij's avatar Linus Walleij Committed by Olof Johansson

ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij's avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 0c2b4504
......@@ -327,7 +327,6 @@ choice
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
......@@ -342,7 +341,6 @@ config ARCH_MULTIPLATFORM
config ARM_SINGLE_ARMV7M
bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
depends on !MMU
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_NVIC
select AUTO_ZRELADDR
select CLKSRC_OF
......@@ -356,12 +354,12 @@ config ARM_SINGLE_ARMV7M
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MFD_SYSCON
select SOC_BUS
help
......@@ -369,10 +367,10 @@ config ARCH_CLPS711X
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_FA526
select GENERIC_CLOCKEVENTS
select GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
......@@ -393,7 +391,6 @@ config ARCH_EBSA110
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
......@@ -402,6 +399,7 @@ config ARCH_EP93XX
select CLKSRC_MMIO
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
......@@ -442,9 +440,9 @@ config ARCH_IOP13XX
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
......@@ -455,9 +453,9 @@ config ARCH_IOP32X
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
......@@ -468,12 +466,12 @@ config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select CPU_XSCALE
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
......@@ -483,9 +481,9 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
select CPU_PJ4
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MIGHT_HAVE_PCI
select MULTI_IRQ_HANDLER
select MVEBU_MBUS
......@@ -499,10 +497,10 @@ config ARCH_DOVE
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_ARM922T
select GENERIC_CLOCKEVENTS
select GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
......@@ -510,11 +508,11 @@ config ARCH_KS8695
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select GPIOLIB
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
At present, the w90x900 has been renamed nuc900, regarding
......@@ -526,13 +524,13 @@ config ARCH_W90X900
config ARCH_LPC32XX
bool "NXP LPC32XX"
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
select CLKSRC_LPC32XX
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
......@@ -543,7 +541,6 @@ config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
select COMMON_CLK
......@@ -554,6 +551,7 @@ config ARCH_PXA
select CPU_XSCALE if !CPU_XSC3
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
......@@ -584,7 +582,6 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CLKSRC_MMIO
......@@ -593,6 +590,7 @@ config ARCH_SA1100
select CPU_FREQ
select CPU_SA1100
select GENERIC_CLOCKEVENTS
select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select ISA
......@@ -604,12 +602,12 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
......@@ -625,12 +623,12 @@ config ARCH_S3C24XX
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GPIOLIB
select HAVE_IDE
select USE_OF
select ZONE_DMA
......@@ -642,11 +640,11 @@ config ARCH_OMAP1
depends on MMU
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
......@@ -868,7 +866,7 @@ source "arch/arm/mach-zynq/Kconfig"
config ARCH_EFM32
bool "Energy Micro efm32"
depends on ARM_SINGLE_ARMV7M
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
help
Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
processors.
......
menuconfig ARCH_AT91
bool "Atmel SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_AT91
select GPIOLIB
select PINCTRL
select SOC_BUS
......
......@@ -17,7 +17,7 @@ config ARCH_BCM_IPROC
select ARM_GLOBAL_TIMER
select COMMON_CLK_IPROC
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select ARM_AMBA
select PINCTRL
help
......@@ -80,7 +80,7 @@ comment "KONA architected SoCs"
config ARCH_BCM_MOBILE
bool
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
......@@ -137,7 +137,7 @@ comment "Other Architectures"
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920 if ARCH_MULTI_V6
select ARM_TIMER_SP804
......@@ -176,7 +176,6 @@ config ARCH_BRCMSTB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_WANT_OPTIONAL_GPIOLIB
select SOC_BRCMSTB
select SOC_BUS
help
......
......@@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs"
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GENERIC_IRQ_CHIP
select GPIOLIB
select MFD_SYSCON
select PINCTRL
......
config ARCH_DIGICOLOR
bool "Conexant Digicolor SoC Support"
depends on ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select DIGICOLOR_TIMER
select GENERIC_IRQ_CHIP
select GPIOLIB
select MFD_SYSCON
select PINCTRL
select PINCTRL_DIGICOLOR
......@@ -12,13 +12,13 @@ menuconfig ARCH_EXYNOS
depends on ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
select EXYNOS_PMU
select EXYNOS_SROM
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
......
menuconfig ARCH_MXC
bool "Freescale i.MX family"
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
select GPIOLIB
select PINCTRL
select PM_OPP if PM
select SOC_BUS
......
......@@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP
config INTEGRATOR_IMPD1
bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select GPIO_PL061 if GPIOLIB
select GPIO_PL061
select GPIOLIB
help
The IM-PD1 is an add-on logic module for the Integrator which
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
......
menuconfig ARCH_MESON
bool "Amlogic Meson SoCs"
depends on ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select GENERIC_IRQ_CHIP
select ARM_GIC
select CACHE_L2X0
......
menuconfig ARCH_MMP
bool "Marvell PXA168/910/MMP2"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select GPIO_PXA
select GPIOLIB
select PINCTRL
select PLAT_PXA
help
......
......@@ -5,7 +5,7 @@ menuconfig ARCH_MOXART
select ARM_DMA_MEM_BUFFERABLE
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
......
menuconfig ARCH_MV78XX0
bool "Marvell MV78xx0"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
......
......@@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU
select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select PCI_QUIRKS if PCI
select OF_ADDRESS_PCI
......@@ -119,8 +119,8 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GPIOLIB
select KIRKWOOD_CLK
select MACH_MVEBU_ANY
select ORION_IRQCHIP
......
......@@ -15,8 +15,8 @@ config SOC_IMX28
config ARCH_MXS
bool "Freescale MXS (i.MX23, i.MX28) support"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GPIOLIB
select PINCTRL
select SOC_BUS
select SOC_IMX23
......
menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
select CPU_ARM926T
select GPIOLIB
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
......
......@@ -88,9 +88,9 @@ config ARCH_OMAP2PLUS
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select GPIOLIB
select MACH_OMAP_GENERIC
select MEMORY
select MFD_SYSCON
......
menuconfig ARCH_ORION5X
bool "Marvell Orion"
depends on MMU && ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
select PCI
select PLAT_ORION_LEGACY
......
menuconfig ARCH_OXNAS
bool "Oxford Semiconductor OXNAS Family SoCs"
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_RESET_CONTROLLER
select GPIOLIB
select PINCTRL
depends on ARCH_MULTI_V5
help
......
config ARCH_PICOXCELL
bool "Picochip PicoXcell"
depends on ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select DW_APB_TIMER_OF
select GPIOLIB
select HAVE_TCM
select NO_IOPORT_MAP
......@@ -3,8 +3,8 @@ menuconfig ARCH_SIRF
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
select GPIOLIB
select NO_IOPORT_MAP
select REGMAP
select PINCTRL
......
......@@ -4,10 +4,10 @@ config ARCH_ROCKCHIP
select PINCTRL
select PINCTRL_ROCKCHIP
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
select GPIOLIB
select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
......
......@@ -11,7 +11,7 @@ if ARCH_S3C24XX
config PLAT_S3C24XX
def_bool y
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select NO_IOPORT_MAP
select S3C_DEV_NAND
select IRQ_DOMAIN
......
......@@ -5,12 +5,12 @@
menuconfig ARCH_S3C64XX
bool "Samsung S3C64XX"
depends on ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
select GPIO_SAMSUNG if ATAGS
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
......
......@@ -11,10 +11,10 @@ config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
depends on ARCH_MULTI_V7
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
......
......@@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select ZONE_DMA if ARM_LPAE
if ARCH_RENESAS
......
......@@ -5,9 +5,9 @@
menuconfig PLAT_SPEAR
bool "ST SPEAr Family"
depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
select GPIOLIB
if PLAT_SPEAR
......
......@@ -10,7 +10,7 @@ menuconfig ARCH_STI
select MFD_SYSCON
select ARCH_HAS_RESET_CONTROLLER
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
......
menuconfig ARCH_SUNXI
bool "Allwinner SoCs"
depends on ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select GPIOLIB
select PINCTRL
select SUN4I_TIMER
select RESET_CONTROLLER
......
menuconfig ARCH_TEGRA
bool "NVIDIA Tegra"
depends on ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_AMBA
select ARM_GIC
select CLKSRC_MMIO
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
......
menuconfig ARCH_U300
bool "ST-Ericsson U300 Series"
depends on ARCH_MULTI_V5 && MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
select GPIOLIB
select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
......
......@@ -3,13 +3,13 @@ menuconfig ARCH_U8500
depends on ARCH_MULTI_V7 && MMU
select AB8500_CORE
select ABX500_CORE
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
......
menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family"
depends on ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
select ARM_GLOBAL_TIMER
select ARM_TIMER_SP804
select COMMON_CLK_VERSATILE
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
......
config ARCH_VT8500
bool
select ARCH_REQUIRE_GPIOLIB
select GPIOLIB
select CLKDEV_LOOKUP
select VT8500_TIMER
select PINCTRL
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment