Commit 2cb785b4 authored by Yangbo Lu's avatar Yangbo Lu Committed by David S. Miller

dt-binding: ptp_qoriq: add DPAA FMan support

This patch is to add bindings description for DPAA
FMan 1588 timer, and also remove its description in
fsl-fman dt-bindings document.
Signed-off-by: default avatarYangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Rob Herring's avatarRob Herring <robh@kernel.org>
Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
Acked-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a8f62d0c
......@@ -356,30 +356,7 @@ ethernet@e0000 {
============================================================================
FMan IEEE 1588 Node
DESCRIPTION
The FMan interface to support IEEE 1588
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: A standard property.
Must include "fsl,fman-ptp-timer".
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property.
EXAMPLE
ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
=============================================================================
FMan MDIO Node
......
......@@ -2,7 +2,8 @@
General Properties:
- compatible Should be "fsl,etsec-ptp"
- compatible Should be "fsl,etsec-ptp" for eTSEC
Should be "fsl,fman-ptp-timer" for DPAA FMan
- reg Offset and length of the register set for the device
- interrupts There should be at least two interrupts. Some devices
have as many as four PTP related interrupts.
......@@ -43,14 +44,22 @@ Clock Properties:
value, which will be directly written in those bits, that is why,
according to reference manual, the next clock sources can be used:
For eTSEC,
<0> - external high precision timer reference clock (TSEC_TMR_CLK
input is used for this purpose);
<1> - eTSEC system clock;
<2> - eTSEC1 transmit clock;
<3> - RTC clock input.
When this attribute is not used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.
For DPAA FMan,
<0> - external high precision timer reference clock (TMR_1588_CLK)
<1> - MAC system clock (1/2 FMan clock)
<2> - reserved
<3> - RTC clock oscillator
When this attribute is not used, the IEEE 1588 timer reference clock
will use the eTSEC system clock (for Gianfar) or the MAC system
clock (for DPAA).
Example:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment