Commit 19530313 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig file consolidation from Masahiro Yamada:
 "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
  Christoph Hellwig.

  Currently, every architecture that wants to provide common peripheral
  busses needs to add some boilerplate code and include the right
  Kconfig files. This series instead just selects the presence (when
  needed) and then handles everything in the bus-specific Kconfig file
  under drivers/"

* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  pcmcia: remove per-arch PCMCIA config entry
  eisa: consolidate EISA Kconfig entry in drivers/eisa
  rapidio: consolidate RAPIDIO config entry in drivers/rapidio
  pcmcia: allow PCMCIA support independent of the architecture
  PCI: consolidate the PCI_SYSCALL symbol
  PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
  PCI: consolidate PCI config entry in drivers/pci
  MIPS: remove the HT_PCI config option
parents 769e4709 5cfc879c
......@@ -7,6 +7,9 @@ config ALPHA
select ARCH_NO_PREEMPT
select ARCH_NO_SG_CHAIN
select ARCH_USE_CMPXCHG_LOCKREF
select FORCE_PCI if !ALPHA_JENSEN
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select HAVE_AOUT
select HAVE_IDE
select HAVE_OPROFILE
......@@ -16,6 +19,7 @@ config ALPHA
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP if PCI
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
select ARCH_WANT_IPC_PARSE_VERSION
......@@ -126,11 +130,13 @@ choice
config ALPHA_GENERIC
bool "Generic"
depends on TTY
select HAVE_EISA
help
A generic kernel will run on all supported Alpha hardware.
config ALPHA_ALCOR
bool "Alcor/Alpha-XLT"
select HAVE_EISA
help
For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
......@@ -203,6 +209,7 @@ config ALPHA_EIGER
config ALPHA_JENSEN
bool "Jensen"
depends on BROKEN
select HAVE_EISA
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
......@@ -219,6 +226,7 @@ config ALPHA_LX164
config ALPHA_LYNX
bool "Lynx"
select HAVE_EISA
help
AlphaServer 2100A-based systems.
......@@ -229,6 +237,7 @@ config ALPHA_MARVEL
config ALPHA_MIATA
bool "Miata"
select HAVE_EISA
help
The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
or 600au).
......@@ -248,6 +257,7 @@ config ALPHA_NONAME_CH
config ALPHA_NORITAKE
bool "Noritake"
select HAVE_EISA
help
AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
systems.
......@@ -260,6 +270,7 @@ config ALPHA_P2K
config ALPHA_RAWHIDE
bool "Rawhide"
select HAVE_EISA
help
AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
See HOWTO at
......@@ -279,6 +290,7 @@ config ALPHA_SX164
config ALPHA_SABLE
bool "Sable"
select HAVE_EISA
help
Digital AlphaServer 2000 and 2100-based systems.
......@@ -319,24 +331,6 @@ config ISA_DMA_API
bool
default y
config PCI
bool
depends on !ALPHA_JENSEN
select GENERIC_PCI_IOMAP
default y
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool
default y
config PCI_SYSCALL
def_bool PCI
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
......@@ -526,11 +520,6 @@ config ALPHA_SRM
If unsure, say N.
config EISA
bool
depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
default y
config ARCH_MAY_HAVE_PC_FDC
def_bool y
......@@ -681,11 +670,6 @@ config HZ
default 1200 if HZ_1200
default 1024
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
source "drivers/pcmcia/Kconfig"
config SRM_ENV
tristate "SRM environment through procfs"
depends on PROC_FS
......
......@@ -45,14 +45,12 @@ config ARC
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
config MIGHT_HAVE_PCI
bool
config TRACE_IRQFLAGS_SUPPORT
def_bool y
......@@ -541,24 +539,4 @@ config FORCE_MAX_ZONEORDER
default "12" if ARC_HUGEPAGE_16M
default "11"
menu "Bus Support"
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
PCI is the name of a bus system, i.e., the way the CPU talks to
the other stuff inside your box. Find out if your board/platform
has PCI.
Note: PCIe support for Synopsys Device will be available only
when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
say Y, otherwise N.
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
endmenu
source "kernel/power/Kconfig"
......@@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
select MIGHT_HAVE_PCI
select HAVE_PCI
select GENERIC_IRQ_CHIP
select GPIOLIB
select AXS101 if ISA_ARCOMPACT
......
......@@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
select MIGHT_HAVE_PCI
select HAVE_PCI
......@@ -104,6 +104,7 @@ config ARM
select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PCI_SYSCALL if PCI
select PERF_USE_VMALLOC
select REFCOUNT_FULL
select RTC_LIB
......@@ -147,9 +148,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
endif
config MIGHT_HAVE_PCI
bool
config SYS_SUPPORTS_APM_EMULATION
bool
......@@ -163,21 +161,6 @@ config HAVE_PROC_CPU
config NO_IOPORT_MAP
bool
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config SBUS
bool
......@@ -333,8 +316,8 @@ config ARCH_MULTIPLATFORM
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
select SPARSE_IRQ
select USE_OF
......@@ -407,7 +390,7 @@ config ARCH_IOP13XX
select CPU_XSC3
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
select VMSPLIT_1G
select SPARSE_IRQ
......@@ -421,7 +404,7 @@ config ARCH_IOP32X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
help
Support for Intel's 80219 and IOP32X (XScale) family of
......@@ -434,7 +417,7 @@ config ARCH_IOP33X
select GPIO_IOP
select GPIOLIB
select NEED_RET_TO_USER
select PCI
select FORCE_PCI
select PLAT_IOP
help
Support for Intel's IOP33X (XScale) family of processors.
......@@ -449,7 +432,7 @@ config ARCH_IXP4XX
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MIGHT_HAVE_PCI
select HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
......@@ -462,7 +445,7 @@ config ARCH_DOVE
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select MIGHT_HAVE_PCI
select HAVE_PCI
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
......@@ -1230,46 +1213,18 @@ config ISA_DMA
config ISA_DMA_API
bool
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
config PCI_DOMAINS
bool "Support for multiple PCI domains"
depends on PCI
help
Enable PCI domains kernel management. Say Y if your machine
has a PCI bus hierarchy that requires more than one PCI
domain (aka segment) to be correctly managed. Say N otherwise.
If you don't know what to do here, say N.
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
config PCI_NANOENGINE
bool "BSE nanoEngine PCI support"
depends on SA1100_NANOENGINE
help
Enable PCI on the BSE nanoEngine board.
config PCI_SYSCALL
def_bool PCI
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
default y
select DMABOUNCE
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
menu "Kernel Features"
......
......@@ -9,7 +9,7 @@ config ARCH_ALPINE
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select MFD_SYSCON
select PCI
select FORCE_PCI
select PCI_HOST_GENERIC
help
This enables support for the Annapurna Labs Alpine V1 boards.
......@@ -20,7 +20,7 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
select PCI_DOMAINS if PCI
select PCI_DOMAINS_GENERIC if PCI
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
......
......@@ -9,7 +9,7 @@ config ARCH_CATS
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the CATS.
......@@ -20,7 +20,7 @@ config ARCH_PERSONAL_SERVER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
---help---
Say Y here if you intend to run this kernel on the Compaq
Personal Server.
......@@ -53,7 +53,7 @@ config ARCH_EBSA285_HOST
select ISA
select ISA_DMA
select ARCH_MAY_HAVE_PC_FDC
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode.
......@@ -67,7 +67,7 @@ config ARCH_NETWINDER
select FOOTBRIDGE_HOST
select ISA
select ISA_DMA
select PCI
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
......
......@@ -7,7 +7,7 @@ comment "IXP4xx Platforms"
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
......@@ -15,7 +15,7 @@ config MACH_NSLU2
config MACH_AVILA
bool "Avila"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
......@@ -31,7 +31,7 @@ config MACH_LOFT
config ARCH_ADI_COYOTE
bool "Coyote"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
......@@ -39,7 +39,7 @@ config ARCH_ADI_COYOTE
config MACH_GATEWAY7001
bool "Gateway 7001"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
......@@ -47,7 +47,7 @@ config MACH_GATEWAY7001
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
......@@ -107,7 +107,7 @@ config ARCH_PRPMC1100
config MACH_NAS100D
bool
prompt "NAS100D"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
......@@ -116,7 +116,7 @@ config MACH_NAS100D
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
......@@ -130,7 +130,7 @@ config ARCH_IXDP4XX
config MACH_FSG
bool
prompt "Freecom FSG-3"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
......@@ -139,7 +139,7 @@ config MACH_FSG
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
......@@ -160,7 +160,7 @@ config CPU_IXP43X
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
select PCI
select FORCE_PCI
help
This board is currently inside the Linksys WRV54G Gateways.
......@@ -183,7 +183,7 @@ config MACH_DEVIXP
config MACH_MICCPT
bool "Omicron MICCPT"
select PCI
select FORCE_PCI
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
......
......@@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
config MACH_KS8695
bool "KS8695 development board"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to run on the original
Kendin-Micrel KS8695 development board.
......@@ -52,7 +52,7 @@ config MACH_CM4002
config MACH_CM4008
bool "OpenGear CM4008"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4008 Console Server. See http://www.opengear.com for more
......@@ -60,7 +60,7 @@ config MACH_CM4008
config MACH_CM41xx
bool "OpenGear CM41xx"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
CM4016 or CM4048 Console Servers. See http://www.opengear.com for
......@@ -68,7 +68,7 @@ config MACH_CM41xx
config MACH_IM4004
bool "OpenGear IM4004"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4004 Secure Access Server. See http://www.opengear.com for
......@@ -76,7 +76,7 @@ config MACH_IM4004
config MACH_IM42xx
bool "OpenGear IM42xx"
select MIGHT_HAVE_PCI
select HAVE_PCI
help
Say 'Y' here if you want your kernel to support the OpenGear
IM4216 or IM4248 Console Servers. See http://www.opengear.com for
......
......@@ -4,7 +4,7 @@ menuconfig ARCH_MV78XX0
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
select PCI
select FORCE_PCI
select PLAT_ORION_LEGACY
help
Support for the following Marvell MV78xx0 series SoCs:
......
......@@ -124,7 +124,7 @@ config MACH_KIRKWOOD
select MACH_MVEBU_ANY
select ORION_IRQCHIP
select ORION_TIMER
select PCI
select FORCE_PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
......
......@@ -5,7 +5,7 @@ menuconfig ARCH_ORION5X
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MVEBU_MBUS
select PCI
select FORCE_PCI
select PHYLIB if NETDEVICES
select PLAT_ORION_LEGACY
help
......
......@@ -125,7 +125,7 @@ config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
select MIGHT_HAVE_PCI
select HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
......
......@@ -120,7 +120,7 @@ config SA1100_LART
config SA1100_NANOENGINE
bool "nanoEngine"
select ARM_SA1110_CPUFREQ
select PCI
select FORCE_PCI
select PCI_NANOENGINE
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
......
......@@ -10,7 +10,7 @@ menuconfig ARCH_SOCFPGA
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
select PCI_DOMAINS if PCI
select PCI_DOMAINS_GENERIC if PCI
if ARCH_SOCFPGA
config SOCFPGA_SUSPEND
......
......@@ -102,6 +102,7 @@ config ARM64
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
select HAVE_PCI
select HAVE_ACPI_APEI if (ACPI && EFI)
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
......@@ -163,7 +164,9 @@ config ARM64
select OF
select OF_EARLY_FLATTREE
select OF_RESERVED_MEM
select PCI_DOMAINS_GENERIC if PCI
select PCI_ECAM if (ACPI && PCI)
select PCI_SYSCALL if PCI
select POWER_RESET
select POWER_SUPPLY
select REFCOUNT_FULL
......@@ -290,28 +293,6 @@ config ARCH_PROC_KCORE_TEXT
source "arch/arm64/Kconfig.platforms"
menu "Bus support"
config PCI
bool "PCI support"
help
This feature enables support for PCI bus system. If you say Y
here, the kernel will include drivers and infrastructure code
to support PCI bus devices.
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
endmenu
menu "Kernel Features"
menu "ARM errata workarounds via the alternatives framework"
......
......@@ -46,9 +46,6 @@ config FRAME_POINTER
config LOCKDEP_SUPPORT
def_bool y
config PCI
def_bool n
config EARLY_PRINTK
def_bool y
......
......@@ -10,11 +10,13 @@ config IA64
bool
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select FORCE_PCI if (!IA64_HP_SIM)
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_EXIT_THREAD
select HAVE_IDE
......@@ -540,30 +542,6 @@ endif
endmenu
if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
config PCI
bool "PCI support"
help
Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
endif
source "arch/ia64/hp/sim/Kconfig"
config MSPEC
......
......@@ -63,22 +63,9 @@ source "drivers/zorro/Kconfig"
endif
config PCI
bool "PCI support"
depends on M54xx
help
Enable the PCI bus. Support for the PCI bus hardware built into the
ColdFire 547x and 548x processors.
if PCI
source "drivers/pci/Kconfig"
endif
if !MMU
config ISA_DMA_API
def_bool !M5272
source "drivers/pcmcia/Kconfig"
endif
......@@ -299,6 +299,7 @@ config M53xx
bool
config M54xx
select HAVE_PCI
bool
endif # COLDFIRE
......
......@@ -29,11 +29,14 @@ config MICROBLAZE
select HAVE_FUNCTION_TRACER
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
select HAVE_PCI
select IRQ_DOMAIN
select XILINX_INTC
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
select PCI_DOMAINS_GENERIC if PCI
select PCI_SYSCALL if PCI
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
......@@ -265,22 +268,8 @@ endmenu
menu "Bus Options"
config PCI
bool "PCI support"
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
source "drivers/pci/Kconfig"
endmenu
......@@ -25,6 +25,7 @@ config MIPS
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ISA_DMA if EISA
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_CMPDI2
......@@ -74,6 +75,7 @@ config MIPS
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
select IRQ_FORCED_THREADING
select ISA if EISA
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
select PERF_USE_VMALLOC
......@@ -98,7 +100,7 @@ config MIPS_GENERIC
select CPU_MIPSR2_IRQ_EI
select CSRC_R4K
select DMA_PERDEV_COHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_AUTO_PFN_OFFSET
......@@ -259,7 +261,7 @@ config BCM47XX
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select HAVE_PCI
select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1