Commit 07ab85de authored by Alek Du's avatar Alek Du Committed by Jeff Garzik

libata: Add Intel SCH PATA driver

This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L)
PATA controller support.
Signed-off-by: default avatarAlek Du <alek.du@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent cb6716c8
......@@ -697,6 +697,15 @@ config PATA_SCC
If unsure, say N.
config PATA_SCH
tristate "Intel SCH PATA support"
depends on PCI
help
This option enables support for Intel SCH PATA on the Intel
SCH (US15W, US15L, UL11L) series host controllers.
If unsure, say N.
config PATA_BF54X
tristate "Blackfin 54x ATAPI support"
depends on BF542 || BF548 || BF549
......
......@@ -67,6 +67,7 @@ obj-$(CONFIG_PATA_SIS) += pata_sis.o
obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
......
/*
* pata_sch.c - Intel SCH PATA controllers
*
* Copyright (c) 2008 Alek Du <alek.du@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* Supports:
* Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
* http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>
#define DRV_NAME "pata_sch"
#define DRV_VERSION "0.2"
/* see SCH datasheet page 351 */
enum {
D0TIM = 0x80, /* Device 0 Timing Register */
D1TIM = 0x84, /* Device 1 Timing Register */
PM = 0x07, /* PIO Mode Bit Mask */
MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
PPE = (1 << 30), /* Prefetch/Post Enable */
USD = (1 << 31), /* Use Synchronous DMA */
};
static int sch_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static const struct pci_device_id sch_pci_tbl[] = {
/* Intel SCH PATA Controller */
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
{ } /* terminate list */
};
static struct pci_driver sch_pci_driver = {
.name = DRV_NAME,
.id_table = sch_pci_tbl,
.probe = sch_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
static struct scsi_host_template sch_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sch_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_unknown,
.set_piomode = sch_set_piomode,
.set_dmamode = sch_set_dmamode,
};
static struct ata_port_info sch_port_info = {
.flags = 0,
.pio_mask = ATA_PIO4, /* pio0-4 */
.mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
.port_ops = &sch_pata_ops,
};
MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
MODULE_VERSION(DRV_VERSION);
/**
* sch_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: ATA device
*
* Set PIO mode for device, in host controller PCI config space.
*
* LOCKING:
* None (inherited from caller).
*/
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned int port = adev->devno ? D1TIM : D0TIM;
unsigned int data;
pci_read_config_dword(dev, port, &data);
/* see SCH datasheet page 351 */
/* set PIO mode */
data &= ~(PM | PPE);
data |= pio;
/* enable PPE for block device */
if (adev->class == ATA_DEV_ATA)
data |= PPE;
pci_write_config_dword(dev, port, data);
}
/**
* sch_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: ATA device
*
* Set MW/UDMA mode for device, in host controller PCI config space.
*
* LOCKING:
* None (inherited from caller).
*/
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int dma_mode = adev->dma_mode;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned int port = adev->devno ? D1TIM : D0TIM;
unsigned int data;
pci_read_config_dword(dev, port, &data);
/* see SCH datasheet page 351 */
if (dma_mode >= XFER_UDMA_0) {
/* enable Synchronous DMA mode */
data |= USD;
data &= ~UDM;
data |= (dma_mode - XFER_UDMA_0) << 16;
} else { /* must be MWDMA mode, since we masked SWDMA already */
data &= ~(USD | MDM);
data |= (dma_mode - XFER_MW_DMA_0) << 8;
}
pci_write_config_dword(dev, port, data);
}
/**
* sch_init_one - Register SCH ATA PCI device with kernel services
* @pdev: PCI device to register
* @ent: Entry in sch_pci_tbl matching with @pdev
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, or -ERRNO value.
*/
static int __devinit sch_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
struct ata_host *host;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
/* enable device and prepare host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
pci_set_master(pdev);
return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht);
}
static int __init sch_init(void)
{
return pci_register_driver(&sch_pci_driver);
}
static void __exit sch_exit(void)
{
pci_unregister_driver(&sch_pci_driver);
}
module_init(sch_init);
module_exit(sch_exit);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment