1. 23 Sep, 2014 3 commits
  2. 18 Sep, 2014 1 commit
  3. 16 Sep, 2014 3 commits
    • Grygorii Strashko's avatar
      gpio: syscon: reuse for keystone 2 socs · 2134cb99
      Grygorii Strashko authored
      On Keystone SOCs, ARM host can send interrupts to DSP cores using the
      DSP GPIO controller IP. Each DSP GPIO controller provides 28 IRQ signals for
      each DSP core. This is one of the component used by the IPC mechanism used
      on Keystone SOCs.
      Keystone 2 DSP GPIO controller has specific features:
      - each GPIO can be configured only as output pin;
      - setting GPIO value to 1 causes IRQ generation on target DSP core;
      - reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
      This patch updates gpio-syscon driver to be reused by Keystone 2 SoCs,
      because the Keystone 2 DSP GPIO controller is controlled through Syscon
      devices and, as requested by Linus Walleij, such kind of GPIO controllers
      should be integrated with drivers/gpio/gpio-syscon.c driver.
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: Linus Walleij's avatarLinus Walleij <linus.walleij@linaro.org>
    • Grygorii Strashko's avatar
      gpio: syscon: retrive syscon node and regs offsets from dt · 5a3e3f88
      Grygorii Strashko authored
      This patch adds handling of new "gpio,syscon-dev" DT property,
      which allows to specify syscon node and data/direction registers
      offsets in DT.
      "gpio,syscon-dev" has following format:
      	gpio,syscon-dev = <&syscon_dev data_reg_offset [direction_reg_offset]>;
       - syscon_dev - phandle on syscon node
       - data_reg_offset - offset of data register (in bytes)
       - direction_reg_offset - offset of dirrection register (optional, in bytes)
      for example:
      	gpio,syscon-dev = <&devctrl 0x254>;
      In such way, the support of multiple Syscon GPIO devices is added.
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: Linus Walleij's avatarLinus Walleij <linus.walleij@linaro.org>
    • Grygorii Strashko's avatar
      gpio: syscon: add soc specific callback to assign output value · 2c341d62
      Grygorii Strashko authored
      Some SoCs (like Keystone) may require to perform special
      sequence of operations to assign output GPIO value, so default
      implementation of .set() callback from gpio-syscon driver
      can't be used.
      Hence, add optional, SoC specific callback to assign output
      gpio value.
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: Linus Walleij's avatarLinus Walleij <linus.walleij@linaro.org>
  4. 04 Sep, 2014 3 commits
  5. 03 Sep, 2014 1 commit
  6. 02 Sep, 2014 1 commit
  7. 29 Aug, 2014 5 commits
  8. 28 Aug, 2014 4 commits
  9. 25 Aug, 2014 5 commits
    • Linus Torvalds's avatar
      Linux 3.17-rc2 · 52addcf9
      Linus Torvalds authored
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · f01bfc97
      Linus Torvalds authored
      Pull NFS client fixes from Trond Myklebust:
         - more fixes for read/write codepath regressions
           * sleeping while holding the inode lock
           * stricter enforcement of page contiguity when coalescing requests
           * fix up error handling in the page coalescing code
         - don't busy wait on SIGKILL in the file locking code"
      * tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
        nfs: can_coalesce_requests must enforce contiguity
        nfs: disallow duplicate pages in pgio page vectors
        nfs: don't sleep with inode lock in lock_and_join_requests
        nfs: fix error handling in lock_and_join_requests
        nfs: use blocking page_group_lock in add_request
        nfs: fix nonblocking calls to nfs_page_group_lock
        nfs: change nfs_page_group_lock argument
    • Linus Torvalds's avatar
      Merge tag 'renesas-sh-drivers-for-v3.17' of... · dd5957b7
      Linus Torvalds authored
      Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
      Pull SH driver fix from Simon Horman:
       "Confine SH_INTC to platforms that need it"
      * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        sh: intc: Confine SH_INTC to platforms that need it
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 497c01dd
      Linus Torvalds authored
      Pull MIPS fixes from Ralf Baechle:
       "Pretty much all across the field so with this we should be in
        reasonable shape for the upcoming -rc2"
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: OCTEON: make get_system_type() thread-safe
        MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
        MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
        MIPS: EVA: Add new EVA header
        MIPS: scall64-o32: Fix indirect syscall detection
        MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
        MIPS: Loongson: Fix COP2 usage for preemptible kernel
        MIPS: NL: Fix nlm_xlp_defconfig build error
        MIPS: Remove race window in page fault handling
        MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
        MIPS: Alchemy: Fix db1200 PSC clock enablement
        MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
        MIPS: Remove duplicated include from numa.c
        MIPS: Add common plat_irq_dispatch declaration
        MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
        MIPS: GIC: Remove useless parens from GICBIS().
        MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
    • Linus Torvalds's avatar
      Merge tag 'trace-fixes-v3.17-rc1' of... · 01e9982a
      Linus Torvalds authored
      Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
       "The rewrite of the ftrace code that makes it possible to allow for
        separate trampolines had a design flaw with the interaction between
        the function and function_graph tracers.
        The main flaw was the simplification of the use of multiple tracers
        having the same filter (like function and function_graph, that use the
        set_ftrace_filter file to filter their code).  The design assumed that
        the two tracers could never run simultaneously as only one tracer can
        be used at a time.  The problem with this assumption was that the
        function profiler could be implemented on top of the function graph
        tracer, and the function profiler could run at the same time as the
        function tracer.  This caused the assumption to be broken and when
        ftrace detected this failed assumpiton it would spit out a nasty
        warning and shut itself down.
        Instead of using a single ftrace_ops that switches between the
        function and function_graph callbacks, the two tracers can again use
        their own ftrace_ops.  But instead of having a complex hierarchy of
        ftrace_ops, the filter fields are placed in its own structure and the
        ftrace_ops can carefully use the same filter.  This change took a bit
        to be able to allow for this and currently only the global_ops can
        share the same filter, but this new design can easily be modified to
        allow for any ftrace_ops to share its filter with another ftrace_ops.
        The first four patches deal with the change of allowing the ftrace_ops
        to share the filter (and this needs to go to 3.16 as well).
        The fifth patch fixes a bug that was also caused by the new changes
        but only for archs other than x86, and only if those archs implement a
        direct call to the function_graph tracer which they do not do yet but
        will in the future.  It does not need to go to stable, but needs to be
        fixed before the other archs update their code to allow direct calls
        to the function_graph trampoline"
      * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        ftrace: Use current addr when converting to nop in __ftrace_replace_code()
        ftrace: Fix function_profiler and function tracer together
        ftrace: Fix up trampoline accounting with looping on hash ops
        ftrace: Update all ftrace_ops for a ftrace_hash_ops update
        ftrace: Allow ftrace_ops to use the hashes from other ops
  10. 24 Aug, 2014 12 commits
  11. 23 Aug, 2014 2 commits