Commit d2d8442d authored by Paul Gortmaker's avatar Paul Gortmaker

drivers/input: Add module.h to modular drivers implicitly using it

A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in input dir
are actually calling out for <module.h> explicitly in advance.
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
parent 778f523d
......@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/input-polldev.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
......
......@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/input/as5011.h>
#include <linux/slab.h>
#include <linux/module.h>
#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
#define MODULE_DEVICE_ALIAS "as5011"
......
......@@ -18,6 +18,7 @@
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <plat/ske.h>
......
......@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/input/matrix_keypad.h>
#include <linux/module.h>
#define BITS(x) (BIT(x) - 1)
......
......@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/input/ad714x.h>
#include <linux/module.h>
#include "ad714x.h"
#define AD714X_PWR_CTRL 0x0
......
......@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/input/adxl34x.h>
#include <linux/module.h>
#include "adxl34x.h"
......
......@@ -11,6 +11,7 @@
#include <linux/usb/input.h>
#include <linux/slab.h>
#include <linux/module.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.3"
......
......@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/cma3000.h>
#include <linux/module.h>
#include "cma3000_d0x.h"
......
......@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/i2c/dm355evm_msp.h>
#include <linux/module.h>
/*
......
......@@ -15,6 +15,7 @@
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/module.h>
#include <linux/slab.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
......
......@@ -45,6 +45,7 @@
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/ad7877.h>
#include <linux/module.h>
#include <asm/irq.h>
#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(100)
......
......@@ -9,6 +9,7 @@
#include <linux/input.h> /* BUS_SPI */
#include <linux/pm.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include "ad7879.h"
......
......@@ -33,6 +33,7 @@
#include <linux/gpio.h>
#include <linux/spi/ad7879.h>
#include <linux/module.h>
#include "ad7879.h"
#define AD7879_REG_ZEROS 0
......
......@@ -31,6 +31,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <asm/irq.h>
/*
......
......@@ -13,6 +13,7 @@
#include <linux/input/bu21013.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment