Commit b06f3a16 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-linus-20160106' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:
 "Three last MTD fixes for v4.4.  These are all fixes for regressions
  and bugs reported mid cycle.  Unfortunately, some of them took a bit
  long to get proper testing and feedback.

   - Assign the default MTD name earlier in the registration process, so
     partition parsers (like cmdlinepart) see the right name.  Without
     this, some systems may come up with unpartitioned flash.  This was
     a v4.4-rc1 regression.

   - Revert some new Winbond SPI NOR flash unlocking/locking support;
     new code in v4.4 caused regressions on some Spansion flash.

   - Fix mis-typed parameter ordering in SPI NOR unlock function; this
     bug was introduced in v4.4-rc1"

* tag 'for-linus-20160106' of git://git.infradead.org/linux-mtd:
  mtd: spi-nor: fix stm_is_locked_sr() parameters
  mtd: spi-nor: fix Spansion regressions (aliased with Winbond)
  mtd: fix cmdlinepart parser, early naming for auto-filled MTD
parents 51cb67c0 a32d5b72
......@@ -426,15 +426,6 @@ int add_mtd_device(struct mtd_info *mtd)
mtd->erasesize_mask = (1 << mtd->erasesize_shift) - 1;
mtd->writesize_mask = (1 << mtd->writesize_shift) - 1;
if (mtd->dev.parent) {
if (!mtd->owner && mtd->dev.parent->driver)
mtd->owner = mtd->dev.parent->driver->owner;
if (!mtd->name)
mtd->name = dev_name(mtd->dev.parent);
} else {
pr_debug("mtd device won't show a device symlink in sysfs\n");
}
/* Some chips always power up locked. Unlock them now */
if ((mtd->flags & MTD_WRITEABLE) && (mtd->flags & MTD_POWERUP_LOCK)) {
error = mtd_unlock(mtd, 0, mtd->size);
......@@ -549,6 +540,21 @@ static int mtd_add_device_partitions(struct mtd_info *mtd,
return 0;
}
/*
* Set a few defaults based on the parent devices, if not provided by the
* driver
*/
static void mtd_set_dev_defaults(struct mtd_info *mtd)
{
if (mtd->dev.parent) {
if (!mtd->owner && mtd->dev.parent->driver)
mtd->owner = mtd->dev.parent->driver->owner;
if (!mtd->name)
mtd->name = dev_name(mtd->dev.parent);
} else {
pr_debug("mtd device won't show a device symlink in sysfs\n");
}
}
/**
* mtd_device_parse_register - parse partitions and register an MTD device.
......@@ -587,6 +593,8 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
int ret;
struct mtd_partition *real_parts = NULL;
mtd_set_dev_defaults(mtd);
ret = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
if (ret <= 0 && nr_parts && parts) {
real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
......
......@@ -516,8 +516,8 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
status_old = read_sr(nor);
/* Cannot unlock; would unlock larger region than requested */
if (stm_is_locked_sr(nor, status_old, ofs - mtd->erasesize,
mtd->erasesize))
if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize,
status_old))
return -EINVAL;
/*
......@@ -1200,8 +1200,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
JEDEC_MFR(info) == SNOR_MFR_INTEL ||
JEDEC_MFR(info) == SNOR_MFR_SST ||
JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
JEDEC_MFR(info) == SNOR_MFR_SST) {
write_enable(nor);
write_sr(nor, 0);
}
......@@ -1217,8 +1216,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mtd->_read = spi_nor_read;
/* NOR protection support for STmicro/Micron chips and similar */
if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
if (JEDEC_MFR(info) == SNOR_MFR_MICRON) {
nor->flash_lock = stm_lock;
nor->flash_unlock = stm_unlock;
nor->flash_is_locked = stm_is_locked;
......
......@@ -25,7 +25,7 @@
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
#define SNOR_MFR_SPANSION CFI_MFR_AMD
#define SNOR_MFR_SST CFI_MFR_SST
#define SNOR_MFR_WINBOND 0xef
#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */
/*
* Note on opcode nomenclature: some opcodes have a format like
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment