Commit ada07281 authored by Jean DELVARE's avatar Jean DELVARE
Browse files

hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets

The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor.
This new driver supports it.

Note that on many boards the sensor seems to be disabled and reports
the minimum value (36.5 degrees Celsius) all the time.
Signed-off-by: Jean DELVARE's avatarJean Delvare <>
Tested-by: default avatarRomain Dolbeau <>
Reviewed-by: default avatarGuenter Roeck <>
parent ec6f34e5
......@@ -574,6 +574,16 @@ config SENSORS_IIO_HWMON
for those channels specified in the map. This map can be provided
either via platform data or the device tree bindings.
config SENSORS_I5500
tristate "Intel 5500/5520/X58 temperature sensor"
depends on X86 && PCI
If you say yes here you get support for the temperature
sensor inside the Intel 5500, 5520 and X58 chipsets.
This driver can also be built as a module. If so, the module
will be called i5500_temp.
tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86
......@@ -68,6 +68,7 @@ obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o
obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o
obj-$(CONFIG_SENSORS_HTU21) += htu21.o
obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
* i5500_temp - Driver for Intel 5500/5520/X58 chipset thermal sensor
* Copyright (C) 2012, 2014 Jean Delvare <>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* GNU General Public License for more details.
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/pci.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
/* Register definitions from datasheet */
#define REG_TSTHRCATA 0xE2
#define REG_TSCTRL 0xE8
#define REG_TSTHRLO 0xEC
#define REG_TSTHRHI 0xEE
#define REG_CTHINT 0xF0
#define REG_TSFSC 0xF3
#define REG_CTSTS 0xF4
#define REG_TSTHRRQPI 0xF5
#define REG_CTCTRL 0xF7
#define REG_TSTIMER 0xF8
struct i5500_temp_data {
struct device *hwmon_dev;
const char *name;
* Sysfs stuff
/* Sensor resolution : 0.5 degree C */
static ssize_t show_temp(struct device *dev,
struct device_attribute *devattr, char *buf)
struct pci_dev *pdev = to_pci_dev(dev);
long temp;
u16 tsthrhi;
s8 tsfsc;
pci_read_config_word(pdev, REG_TSTHRHI, &tsthrhi);
pci_read_config_byte(pdev, REG_TSFSC, &tsfsc);
temp = ((long)tsthrhi - tsfsc) * 500;
return sprintf(buf, "%ld\n", temp);
static ssize_t show_thresh(struct device *dev,
struct device_attribute *devattr, char *buf)
struct pci_dev *pdev = to_pci_dev(dev);
int reg = to_sensor_dev_attr(devattr)->index;
long temp;
u16 tsthr;
pci_read_config_word(pdev, reg, &tsthr);
temp = tsthr * 500;
return sprintf(buf, "%ld\n", temp);
static ssize_t show_alarm(struct device *dev,
struct device_attribute *devattr, char *buf)
struct pci_dev *pdev = to_pci_dev(dev);
int nr = to_sensor_dev_attr(devattr)->index;
u8 ctsts;
pci_read_config_byte(pdev, REG_CTSTS, &ctsts);
return sprintf(buf, "%u\n", (unsigned int)ctsts & (1 << nr));
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
struct i5500_temp_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", data->name);
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_thresh, NULL, 0xE2);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_thresh, NULL, 0xEC);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_thresh, NULL, 0xEE);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct attribute *i5500_temp_attributes[] = {
static const struct attribute_group i5500_temp_group = {
.attrs = i5500_temp_attributes,
static const struct pci_device_id i5500_temp_ids[] = {
{ 0 },
MODULE_DEVICE_TABLE(pci, i5500_temp_ids);
static int i5500_temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
int err;
struct i5500_temp_data *data;
data = kzalloc(sizeof(struct i5500_temp_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
data->name = "intel5500";
dev_set_drvdata(&pdev->dev, data);
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Failed to enable device\n");
goto exit_free;
/* Register sysfs hooks */
err = sysfs_create_group(&pdev->dev.kobj, &i5500_temp_group);
if (err)
goto exit_free;
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
return 0;
sysfs_remove_group(&pdev->dev.kobj, &i5500_temp_group);
return err;
static void i5500_temp_remove(struct pci_dev *pdev)
struct i5500_temp_data *data = dev_get_drvdata(&pdev->dev);
sysfs_remove_group(&pdev->dev.kobj, &i5500_temp_group);
static struct pci_driver i5500_temp_driver = {
.name = "i5500_temp",
.id_table = i5500_temp_ids,
.probe = i5500_temp_probe,
.remove = i5500_temp_remove,
static int __init i5500_temp_init(void)
return pci_register_driver(&i5500_temp_driver);
static void __exit i5500_temp_exit(void)
MODULE_AUTHOR("Jean Delvare <>");
MODULE_DESCRIPTION("Intel 5500/5520/X58 chipset thermal sensor driver");
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment