Commit a5f0ef59 authored by Laurent Pinchart's avatar Laurent Pinchart

drm/rcar-du: Add support for multiple groups

The R8A7790 DU has 3 CRTCs, split in two groups. Support them.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
parent 9e2d2de9
......@@ -91,7 +91,6 @@ static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
{
const struct drm_display_mode *mode = &rcrtc->crtc.mode;
struct rcar_du_device *rcdu = rcrtc->group->dev;
unsigned long clk;
u32 value;
u32 div;
......@@ -101,9 +100,9 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
div = DIV_ROUND_CLOSEST(clk, mode->clock * 1000);
div = clamp(div, 1U, 64U) - 1;
rcar_du_write(rcdu, rcrtc->index ? ESCR2 : ESCR,
ESCR_DCLKSEL_CLKS | div);
rcar_du_write(rcdu, rcrtc->index ? OTAR2 : OTAR, 0);
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR,
ESCR_DCLKSEL_CLKS | div);
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
/* Signal polarities */
value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : DSMR_VSL)
......@@ -143,7 +142,6 @@ void rcar_du_crtc_route_output(struct drm_crtc *crtc, unsigned int output)
void rcar_du_crtc_update_planes(struct drm_crtc *crtc)
{
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
struct rcar_du_device *rcdu = rcrtc->group->dev;
struct rcar_du_plane *planes[RCAR_DU_NUM_HW_PLANES];
unsigned int num_planes = 0;
unsigned int prio = 0;
......@@ -189,8 +187,8 @@ void rcar_du_crtc_update_planes(struct drm_crtc *crtc)
/* Select display timing and dot clock generator 2 for planes associated
* with superposition controller 2.
*/
if (rcrtc->index) {
u32 value = rcar_du_read(rcdu, DPTSR);
if (rcrtc->index % 2) {
u32 value = rcar_du_group_read(rcrtc->group, DPTSR);
/* The DPTSR register is updated when the display controller is
* stopped. We thus need to restart the DU. Once again, sorry
......@@ -200,13 +198,14 @@ void rcar_du_crtc_update_planes(struct drm_crtc *crtc)
* occur only if we need to break the pre-association.
*/
if (value != dptsr) {
rcar_du_write(rcdu, DPTSR, dptsr);
rcar_du_group_write(rcrtc->group, DPTSR, dptsr);
if (rcrtc->group->used_crtcs)
rcar_du_group_restart(rcrtc->group);
}
}
rcar_du_write(rcdu, rcrtc->index ? DS2PR : DS1PR, dspr);
rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR,
dspr);
}
static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
......@@ -528,6 +527,10 @@ static const struct drm_crtc_funcs crtc_funcs = {
int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
{
static const unsigned int mmio_offsets[] = {
DU0_REG_OFFSET, DU1_REG_OFFSET, DU2_REG_OFFSET
};
struct rcar_du_device *rcdu = rgrp->dev;
struct platform_device *pdev = to_platform_device(rcdu->dev);
struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index];
......@@ -553,10 +556,10 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
}
rcrtc->group = rgrp;
rcrtc->mmio_offset = index ? DISP2_REG_OFFSET : 0;
rcrtc->mmio_offset = mmio_offsets[index];
rcrtc->index = index;
rcrtc->dpms = DRM_MODE_DPMS_OFF;
rcrtc->plane = &rgrp->planes.planes[index];
rcrtc->plane = &rgrp->planes.planes[index % 2];
rcrtc->plane->crtc = crtc;
......
......@@ -218,10 +218,12 @@ static int rcar_du_remove(struct platform_device *pdev)
static const struct rcar_du_device_info rcar_du_r8a7779_info = {
.features = 0,
.num_crtcs = 2,
};
static const struct rcar_du_device_info rcar_du_r8a7790_info = {
.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_ALIGN_128B,
.num_crtcs = 3,
};
static const struct platform_device_id rcar_du_id_table[] = {
......
......@@ -31,9 +31,11 @@ struct rcar_du_device;
/*
* struct rcar_du_device_info - DU model-specific information
* @features: device features (RCAR_DU_FEATURE_*)
* @num_crtcs: total number of CRTCs
*/
struct rcar_du_device_info {
unsigned int features;
unsigned int num_crtcs;
};
struct rcar_du_device {
......@@ -45,10 +47,10 @@ struct rcar_du_device {
struct drm_device *ddev;
struct rcar_du_crtc crtcs[2];
struct rcar_du_crtc crtcs[3];
unsigned int num_crtcs;
struct rcar_du_group group;
struct rcar_du_group groups[2];
};
static inline bool rcar_du_has(struct rcar_du_device *rcdu,
......
......@@ -33,12 +33,12 @@
#include "rcar_du_group.h"
#include "rcar_du_regs.h"
static u32 rcar_du_group_read(struct rcar_du_group *rgrp, u32 reg)
u32 rcar_du_group_read(struct rcar_du_group *rgrp, u32 reg)
{
return rcar_du_read(rgrp->dev, rgrp->mmio_offset + reg);
}
static void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data)
void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data)
{
rcar_du_write(rgrp->dev, rgrp->mmio_offset + reg, data);
}
......
......@@ -38,6 +38,9 @@ struct rcar_du_group {
struct rcar_du_planes planes;
};
u32 rcar_du_group_read(struct rcar_du_group *rgrp, u32 reg);
void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data);
int rcar_du_group_get(struct rcar_du_group *rgrp);
void rcar_du_group_put(struct rcar_du_group *rgrp);
void rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start);
......
......@@ -172,8 +172,13 @@ static const struct drm_mode_config_funcs rcar_du_mode_config_funcs = {
int rcar_du_modeset_init(struct rcar_du_device *rcdu)
{
static const unsigned int mmio_offsets[] = {
DU0_REG_OFFSET, DU2_REG_OFFSET
};
struct drm_device *dev = rcdu->ddev;
struct drm_encoder *encoder;
unsigned int num_groups;
unsigned int i;
int ret;
......@@ -185,22 +190,33 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
rcdu->ddev->mode_config.max_height = 2047;
rcdu->ddev->mode_config.funcs = &rcar_du_mode_config_funcs;
rcdu->group.dev = rcdu;
rcdu->group.index = 0;
rcdu->group.used_crtcs = 0;
rcdu->num_crtcs = rcdu->info->num_crtcs;
/* Initialize the groups. */
num_groups = DIV_ROUND_UP(rcdu->num_crtcs, 2);
for (i = 0; i < num_groups; ++i) {
struct rcar_du_group *rgrp = &rcdu->groups[i];
ret = rcar_du_planes_init(&rcdu->group);
if (ret < 0)
return ret;
rgrp->dev = rcdu;
rgrp->mmio_offset = mmio_offsets[i];
rgrp->index = i;
for (i = 0; i < ARRAY_SIZE(rcdu->crtcs); ++i) {
ret = rcar_du_crtc_create(&rcdu->group, i);
ret = rcar_du_planes_init(rgrp);
if (ret < 0)
return ret;
}
rcdu->num_crtcs = i;
/* Create the CRTCs. */
for (i = 0; i < rcdu->num_crtcs; ++i) {
struct rcar_du_group *rgrp = &rcdu->groups[i / 2];
ret = rcar_du_crtc_create(rgrp, i);
if (ret < 0)
return ret;
}
/* Initialize the encoders. */
for (i = 0; i < rcdu->pdata->num_encoders; ++i) {
const struct rcar_du_encoder_data *pdata =
&rcdu->pdata->encoders[i];
......@@ -229,9 +245,12 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
encoder->possible_clones = 1 << 0;
}
ret = rcar_du_planes_register(&rcdu->group);
if (ret < 0)
return ret;
/* Now that the CRTCs have been initialized register the planes. */
for (i = 0; i < num_groups; ++i) {
ret = rcar_du_planes_register(&rcdu->groups[i]);
if (ret < 0)
return ret;
}
drm_kms_helper_poll_init(rcdu->ddev);
......
......@@ -480,9 +480,12 @@ int rcar_du_planes_register(struct rcar_du_group *rgrp)
{
struct rcar_du_planes *planes = &rgrp->planes;
struct rcar_du_device *rcdu = rgrp->dev;
unsigned int crtcs;
unsigned int i;
int ret;
crtcs = ((1 << rcdu->num_crtcs) - 1) & (3 << (2 * rgrp->index));
for (i = 0; i < RCAR_DU_NUM_KMS_PLANES; ++i) {
struct rcar_du_kms_plane *plane;
......@@ -493,8 +496,7 @@ int rcar_du_planes_register(struct rcar_du_group *rgrp)
plane->hwplane = &planes->planes[i + 2];
plane->hwplane->zpos = 1;
ret = drm_plane_init(rcdu->ddev, &plane->plane,
(1 << rcdu->num_crtcs) - 1,
ret = drm_plane_init(rcdu->ddev, &plane->plane, crtcs,
&rcar_du_plane_funcs, formats,
ARRAY_SIZE(formats), false);
if (ret < 0)
......
......@@ -13,7 +13,9 @@
#ifndef __RCAR_DU_REGS_H__
#define __RCAR_DU_REGS_H__
#define DISP2_REG_OFFSET 0x30000
#define DU0_REG_OFFSET 0x00000
#define DU1_REG_OFFSET 0x30000
#define DU2_REG_OFFSET 0x40000
/* -----------------------------------------------------------------------------
* Display Control Registers
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment