Commit 98f2a97f authored by Cedric Bregardis's avatar Cedric Bregardis Committed by Takashi Iwai
Browse files

[ALSA] Emagic Audiowerk 2 ALSA driver.


Signed-off-by: default avatarCedric Bregardis <cedric.bregardis@free.fr>
Signed-off-by: default avatarJean-Christian Hassler <jhassler@free.fr>
Signed-off-by: Takashi Iwai's avatarTakashi Iwai <tiwai@suse.de>
parent 67ebcb03
......@@ -122,6 +122,21 @@ config SND_AU8830
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
config SND_AW2
tristate "Emagic Audiowerk 2"
depends on SND
help
Say Y here to include support for Emagic Audiowerk 2 soundcards.
Supported features: Analog and SPDIF output. Analog or SPDIF input.
Note: Switch between analog and digital input does not always work.
It can produce continuous noise. The workaround is to switch again
(and again) between digital and analog input until it works.
To compile this driver as a module, choose M here: the module
will be called snd-aw2.
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
depends on SND && EXPERIMENTAL
......
......@@ -58,6 +58,7 @@ obj-$(CONFIG_SND) += \
ac97/ \
ali5451/ \
au88x0/ \
aw2/ \
ca0106/ \
cs46xx/ \
cs5535audio/ \
......
snd-aw2-objs := aw2-alsa.o aw2-saa7146.o
obj-$(CONFIG_SND_AW2) += snd-aw2.o
This diff is collapsed.
/*****************************************************************************
*
* Copyright (C) 2008 Cedric Bregardis <cedric.bregardis@free.fr> and
* Jean-Christian Hassler <jhassler@free.fr>
*
* This file is part of the Audiowerk2 ALSA driver
*
* The Audiowerk2 ALSA driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2.
*
* The Audiowerk2 ALSA driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Audiowerk2 ALSA driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*
*****************************************************************************/
#define AW2_SAA7146_M
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/system.h>
#include <asm/io.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include "aw2-tsl.h"
#include "saa7146.h"
#include "aw2-saa7146.h"
#define WRITEREG(value, addr) writel((value), chip->base_addr + (addr))
#define READREG(addr) readl(chip->base_addr + (addr))
static struct snd_aw2_saa7146_cb_param
arr_substream_it_playback_cb[NB_STREAM_PLAYBACK];
static struct snd_aw2_saa7146_cb_param
arr_substream_it_capture_cb[NB_STREAM_CAPTURE];
static int snd_aw2_saa7146_get_limit(int size);
/* chip-specific destructor */
int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip)
{
/* disable all irqs */
WRITEREG(0, IER);
/* reset saa7146 */
WRITEREG((MRST_N << 16), MC1);
/* Unset base addr */
chip->base_addr = NULL;
return 0;
}
void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
void __iomem *pci_base_addr)
{
/* set PCI burst/threshold
Burst length definition
VALUE BURST LENGTH
000 1 Dword
001 2 Dwords
010 4 Dwords
011 8 Dwords
100 16 Dwords
101 32 Dwords
110 64 Dwords
111 128 Dwords
Threshold definition
VALUE WRITE MODE READ MODE
00 1 Dword of valid data 1 empty Dword
01 4 Dwords of valid data 4 empty Dwords
10 8 Dwords of valid data 8 empty Dwords
11 16 Dwords of valid data 16 empty Dwords */
unsigned int acon2;
unsigned int acon1 = 0;
int i;
/* Set base addr */
chip->base_addr = pci_base_addr;
/* disable all irqs */
WRITEREG(0, IER);
/* reset saa7146 */
WRITEREG((MRST_N << 16), MC1);
/* enable audio interface */
#ifdef __BIG_ENDIAN
acon1 |= A1_SWAP;
acon1 |= A2_SWAP;
#endif
/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
/* At initialization WS1 and WS2 are disbaled (configured as input */
acon1 |= 0 * WS1_CTRL;
acon1 |= 0 * WS2_CTRL;
/* WS4 is not used. So it must not restart A2.
This is why it is configured as output (force to low) */
acon1 |= 3 * WS4_CTRL;
/* WS3_CTRL, WS3_SYNC: output TSL2, I2S */
acon1 |= 2 * WS3_CTRL;
/* A1 and A2 are active and asynchronous */
acon1 |= 3 * AUDIO_MODE;
WRITEREG(acon1, ACON1);
/* The following comes from original windows driver.
It is needed to have a correct behavior of input and output
simultenously, but I don't know why ! */
WRITEREG(3 * (BurstA1_in) + 3 * (ThreshA1_in) +
3 * (BurstA1_out) + 3 * (ThreshA1_out) +
3 * (BurstA2_out) + 3 * (ThreshA2_out), PCI_BT_A);
/* enable audio port pins */
WRITEREG((EAP << 16) | EAP, MC1);
/* enable I2C */
WRITEREG((EI2C << 16) | EI2C, MC1);
/* enable interrupts */
WRITEREG(A1_out | A2_out | A1_in | IIC_S | IIC_E, IER);
/* audio configuration */
acon2 = A2_CLKSRC | BCLK1_OEN;
WRITEREG(acon2, ACON2);
/* By default use analog input */
snd_aw2_saa7146_use_digital_input(chip, 0);
/* TSL setup */
for (i = 0; i < 8; ++i) {
WRITEREG(tsl1[i], TSL1 + (i * 4));
WRITEREG(tsl2[i], TSL2 + (i * 4));
}
}
void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip,
int stream_number,
unsigned long dma_addr,
unsigned long period_size,
unsigned long buffer_size)
{
unsigned long dw_page, dw_limit;
/* Configure DMA for substream
Configuration informations: ALSA has allocated continuous memory
pages. So we don't need to use MMU of saa7146.
*/
/* No MMU -> nothing to do with PageA1, we only configure the limit of
PageAx_out register */
/* Disable MMU */
dw_page = (0L << 11);
/* Configure Limit for DMA access.
The limit register defines an address limit, which generates
an interrupt if passed by the actual PCI address pointer.
'0001' means an interrupt will be generated if the lower
6 bits (64 bytes) of the PCI address are zero. '0010'
defines a limit of 128 bytes, '0011' one of 256 bytes, and
so on up to 1 Mbyte defined by '1111'. This interrupt range
can be calculated as follows:
Range = 2^(5 + Limit) bytes.
*/
dw_limit = snd_aw2_saa7146_get_limit(period_size);
dw_page |= (dw_limit << 4);
if (stream_number == 0) {
WRITEREG(dw_page, PageA2_out);
/* Base address for DMA transfert. */
/* This address has been reserved by ALSA. */
/* This is a physical address */
WRITEREG(dma_addr, BaseA2_out);
/* Define upper limit for DMA access */
WRITEREG(dma_addr + buffer_size, ProtA2_out);
} else if (stream_number == 1) {
WRITEREG(dw_page, PageA1_out);
/* Base address for DMA transfert. */
/* This address has been reserved by ALSA. */
/* This is a physical address */
WRITEREG(dma_addr, BaseA1_out);
/* Define upper limit for DMA access */
WRITEREG(dma_addr + buffer_size, ProtA1_out);
} else {
printk(KERN_ERR
"aw2: snd_aw2_saa7146_pcm_init_playback: "
"Substream number is not 0 or 1 -> not managed\n");
}
}
void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip,
int stream_number, unsigned long dma_addr,
unsigned long period_size,
unsigned long buffer_size)
{
unsigned long dw_page, dw_limit;
/* Configure DMA for substream
Configuration informations: ALSA has allocated continuous memory
pages. So we don't need to use MMU of saa7146.
*/
/* No MMU -> nothing to do with PageA1, we only configure the limit of
PageAx_out register */
/* Disable MMU */
dw_page = (0L << 11);
/* Configure Limit for DMA access.
The limit register defines an address limit, which generates
an interrupt if passed by the actual PCI address pointer.
'0001' means an interrupt will be generated if the lower
6 bits (64 bytes) of the PCI address are zero. '0010'
defines a limit of 128 bytes, '0011' one of 256 bytes, and
so on up to 1 Mbyte defined by '1111'. This interrupt range
can be calculated as follows:
Range = 2^(5 + Limit) bytes.
*/
dw_limit = snd_aw2_saa7146_get_limit(period_size);
dw_page |= (dw_limit << 4);
if (stream_number == 0) {
WRITEREG(dw_page, PageA1_in);
/* Base address for DMA transfert. */
/* This address has been reserved by ALSA. */
/* This is a physical address */
WRITEREG(dma_addr, BaseA1_in);
/* Define upper limit for DMA access */
WRITEREG(dma_addr + buffer_size, ProtA1_in);
} else {
printk(KERN_ERR
"aw2: snd_aw2_saa7146_pcm_init_capture: "
"Substream number is not 0 -> not managed\n");
}
}
void snd_aw2_saa7146_define_it_playback_callback(unsigned int stream_number,
snd_aw2_saa7146_it_cb
p_it_callback,
void *p_callback_param)
{
if (stream_number < NB_STREAM_PLAYBACK) {
arr_substream_it_playback_cb[stream_number].p_it_callback =
(snd_aw2_saa7146_it_cb) p_it_callback;
arr_substream_it_playback_cb[stream_number].p_callback_param =
(void *)p_callback_param;
}
}
void snd_aw2_saa7146_define_it_capture_callback(unsigned int stream_number,
snd_aw2_saa7146_it_cb
p_it_callback,
void *p_callback_param)
{
if (stream_number < NB_STREAM_CAPTURE) {
arr_substream_it_capture_cb[stream_number].p_it_callback =
(snd_aw2_saa7146_it_cb) p_it_callback;
arr_substream_it_capture_cb[stream_number].p_callback_param =
(void *)p_callback_param;
}
}
void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146 *chip,
int stream_number)
{
unsigned int acon1 = 0;
/* In aw8 driver, dma transfert is always active. It is
started and stopped in a larger "space" */
acon1 = READREG(ACON1);
if (stream_number == 0) {
WRITEREG((TR_E_A2_OUT << 16) | TR_E_A2_OUT, MC1);
/* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
acon1 |= 2 * WS2_CTRL;
WRITEREG(acon1, ACON1);
} else if (stream_number == 1) {
WRITEREG((TR_E_A1_OUT << 16) | TR_E_A1_OUT, MC1);
/* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
acon1 |= 1 * WS1_CTRL;
WRITEREG(acon1, ACON1);
}
}
void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146 *chip,
int stream_number)
{
unsigned int acon1 = 0;
acon1 = READREG(ACON1);
if (stream_number == 0) {
/* WS2_CTRL, WS2_SYNC: output TSL2, I2S */
acon1 &= ~(3 * WS2_CTRL);
WRITEREG(acon1, ACON1);
WRITEREG((TR_E_A2_OUT << 16), MC1);
} else if (stream_number == 1) {
/* WS1_CTRL, WS1_SYNC: output TSL1, I2S */
acon1 &= ~(3 * WS1_CTRL);
WRITEREG(acon1, ACON1);
WRITEREG((TR_E_A1_OUT << 16), MC1);
}
}
void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146 *chip,
int stream_number)
{
/* In aw8 driver, dma transfert is always active. It is
started and stopped in a larger "space" */
if (stream_number == 0)
WRITEREG((TR_E_A1_IN << 16) | TR_E_A1_IN, MC1);
}
void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146 *chip,
int stream_number)
{
if (stream_number == 0)
WRITEREG((TR_E_A1_IN << 16), MC1);
}
irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id)
{
unsigned int isr;
unsigned int iicsta;
struct snd_aw2_saa7146 *chip = dev_id;
isr = READREG(ISR);
if (!isr)
return IRQ_NONE;
WRITEREG(isr, ISR);
if (isr & (IIC_S | IIC_E)) {
iicsta = READREG(IICSTA);
WRITEREG(0x100, IICSTA);
}
if (isr & A1_out) {
if (arr_substream_it_playback_cb[1].p_it_callback != NULL) {
arr_substream_it_playback_cb[1].
p_it_callback(arr_substream_it_playback_cb[1].
p_callback_param);
}
}
if (isr & A2_out) {
if (arr_substream_it_playback_cb[0].p_it_callback != NULL) {
arr_substream_it_playback_cb[0].
p_it_callback(arr_substream_it_playback_cb[0].
p_callback_param);
}
}
if (isr & A1_in) {
if (arr_substream_it_capture_cb[0].p_it_callback != NULL) {
arr_substream_it_capture_cb[0].
p_it_callback(arr_substream_it_capture_cb[0].
p_callback_param);
}
}
return IRQ_HANDLED;
}
unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146 *chip,
int stream_number,
unsigned char *start_addr,
unsigned int buffer_size)
{
long pci_adp = 0;
size_t ptr = 0;
if (stream_number == 0) {
pci_adp = READREG(PCI_ADP3);
ptr = pci_adp - (long)start_addr;
if (ptr == buffer_size)
ptr = 0;
}
if (stream_number == 1) {
pci_adp = READREG(PCI_ADP1);
ptr = pci_adp - (size_t) start_addr;
if (ptr == buffer_size)
ptr = 0;
}
return ptr;
}
unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146 *chip,
int stream_number,
unsigned char *start_addr,
unsigned int buffer_size)
{
size_t pci_adp = 0;
size_t ptr = 0;
if (stream_number == 0) {
pci_adp = READREG(PCI_ADP2);
ptr = pci_adp - (size_t) start_addr;
if (ptr == buffer_size)
ptr = 0;
}
return ptr;
}
void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip,
int use_digital)
{
/* FIXME: switch between analog and digital input does not always work.
It can produce a kind of white noise. It seams that received data
are inverted sometime (endian inversion). Why ? I don't know, maybe
a problem of synchronization... However for the time being I have
not found the problem. Workaround: switch again (and again) between
digital and analog input until it works. */
if (use_digital)
WRITEREG(0x40, GPIO_CTRL);
else
WRITEREG(0x50, GPIO_CTRL);
}
int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146 *chip)
{
unsigned int reg_val = READREG(GPIO_CTRL);
if ((reg_val & 0xFF) == 0x40)
return 1;
else
return 0;
}
static int snd_aw2_saa7146_get_limit(int size)
{
int limitsize = 32;
int limit = 0;
while (limitsize < size) {
limitsize *= 2;
limit++;
}
return limit;
}
/*****************************************************************************
*
* Copyright (C) 2008 Cedric Bregardis <cedric.bregardis@free.fr> and
* Jean-Christian Hassler <jhassler@free.fr>
*
* This file is part of the Audiowerk2 ALSA driver
*
* The Audiowerk2 ALSA driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2.
*
* The Audiowerk2 ALSA driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the Audiowerk2 ALSA driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*
*****************************************************************************/
#ifndef AW2_SAA7146_H
#define AW2_SAA7146_H
#define NB_STREAM_PLAYBACK 2
#define NB_STREAM_CAPTURE 1
#define NUM_STREAM_PLAYBACK_ANA 0
#define NUM_STREAM_PLAYBACK_DIG 1
#define NUM_STREAM_CAPTURE_ANA 0
typedef void (*snd_aw2_saa7146_it_cb) (void *);
struct snd_aw2_saa7146_cb_param {
snd_aw2_saa7146_it_cb p_it_callback;
void *p_callback_param;
};
/* definition of the chip-specific record */
struct snd_aw2_saa7146 {
void __iomem *base_addr;
};
extern void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
void __iomem *pci_base_addr);
extern int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip);
extern void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip,
int stream_number,
unsigned long dma_addr,
unsigned long period_size,
unsigned long buffer_size);
extern void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip,
int stream_number,
unsigned long dma_addr,
unsigned long period_size,
unsigned long buffer_size);
extern void snd_aw2_saa7146_define_it_playback_callback(unsigned int
stream_number,
snd_aw2_saa7146_it_cb
p_it_callback,
void *p_callback_param);
extern void snd_aw2_saa7146_define_it_capture_callback(unsigned int
stream_number,
snd_aw2_saa7146_it_cb
p_it_callback,
void *p_callback_param);
extern void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146
*chip, int stream_number);
extern void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146
*chip, int stream_number);
extern void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146
*chip,
int stream_number);
extern void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146
*chip, int stream_number);
extern irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id);
extern unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146
*chip,
int stream_number,
unsigned char
*start_addr,
unsigned int
buffer_size);
extern unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146
*chip,
int stream_number,
unsigned char
*start_addr,
unsigned int
buffer_size);
extern void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip,
int use_digital);
extern int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146
*chip);
#endif
/*****************************************************************************
*
* Copyright (C) 2008 Cedric Bregardis <cedric.bregardis@free.fr> and
* Jean-Christian Hassler <jhassler@free.fr>
* Copyright 1998 Emagic Soft- und Hardware GmbH
* Copyright 2002 Martijn Sipkema
*
* This file is part of the Audiowerk2 ALSA driver
*
* The Audiowerk2 ALSA driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2.
*
* The Audiowerk2 ALSA driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the