Commit 98d4f2ac authored by Simon Guinot's avatar Simon Guinot Committed by Jason Cooper

ARM: Kirkwood: DT board setup for CloudBox

This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox
is a low cost NAS based on the Network Space v2.

Chipset list:
- CPU MARVELL 88F6702 1Ghz
- SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
- SPI flash, NOR 512KB
- 1 push button
- 2 LEDs (red and blue)

There is no EEPROM and no USB ports embedded.

Note that this board must not be confused with the Network Space Mini v2
which is embedded in a previous LaCie product also named CloudBox.
Signed-off-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent a557dd1a
......@@ -51,7 +51,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
......
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "LaCie CloudBox";
compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_spi &pmx_uart0
&pmx_cloudbox_sata0 >;
pinctrl-names = "default";
pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
};
};
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
spi@10600 {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
partition@0 {
reg = <0x0 0x80000>;
label = "u-boot";
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power push button";
linux,code = <116>;
gpios = <&gpio0 16 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
red-fail {
label = "cloudbox:red:fail";
gpios = <&gpio0 14 0>;
};
blue-sata {
label = "cloudbox:blue:sata";
gpios = <&gpio0 15 0>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 17 0>;
};
};
......@@ -30,6 +30,7 @@ CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
CONFIG_MACH_DREAMPLUG_DT=y
......
......@@ -146,6 +146,13 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
config MACH_CLOUDBOX_DT
bool "LaCie CloudBox NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
CloudBox NAS, using Flattened Device Tree.
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
......
......@@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
......
......@@ -139,11 +139,12 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
if (of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_v2") ||
of_machine_is_compatible("lacie,netspace_max_v2") ||
if (of_machine_is_compatible("lacie,cloudbox") ||
of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
of_machine_is_compatible("lacie,netspace_max_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2") ||
of_machine_is_compatible("lacie,netspace_v2"))
ns2_init();
if (of_machine_is_compatible("mpl,cec4"))
......@@ -174,11 +175,12 @@ static const char * const kirkwood_dt_board_compat[] = {
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
"lacie,cloudbox",
"lacie,inetspace_v2",
"lacie,netspace_max_v2",
"lacie,netspace_v2",
"lacie,netspace_lite_v2",
"lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
"lacie,netspace_v2",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
......
......@@ -27,7 +27,8 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
if (of_machine_is_compatible("lacie,cloudbox") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
......
......@@ -153,6 +153,12 @@ void usi_topkick_init(void);
static inline void usi_topkick_init(void) {};
#endif
#ifdef CONFIG_MACH_CLOUDBOX_DT
void cloudbox_init(void);
#else
static inline void cloudbox_init(void) {};
#endif
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment