Commit 810dabd4 authored by Zhu Yi's avatar Zhu Yi Committed by John W. Linville

[PATCH] ipw2200: Bluetooth coexistence support

I've added a new module param "bt_coexist" which defaults to OFF.

This does not seem to fix the firmware restarts, but it does do "the
right thing" and disables something that we were enabling by default:
signaling the Bluetooth h/w which channel we're on (whether or not the
BT h/w was out there).
Signed-off-by: default avatarBen M Cahill <ben.m.cahill@intel.com>
Signed-off-by: default avatarZhu Yi <yi.zhu@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 3e234b4e
......@@ -55,6 +55,7 @@ static int associate = 1;
static int auto_create = 1;
static int led = 0;
static int disable = 0;
static int bt_coexist = 0;
static int hwcrypto = 1;
static const char ipw_modes[] = {
'a', 'b', 'g', '?'
......@@ -9656,7 +9657,7 @@ static struct iw_statistics *ipw_get_wireless_stats(struct net_device *dev)
static void init_sys_config(struct ipw_sys_config *sys_config)
{
memset(sys_config, 0, sizeof(struct ipw_sys_config));
sys_config->bt_coexistence = 1; /* We may need to look into prvStaBtConfig */
sys_config->bt_coexistence = 0;
sys_config->answer_broadcast_ssid_probe = 0;
sys_config->accept_all_data_frames = 0;
sys_config->accept_non_directed_frames = 1;
......@@ -10362,6 +10363,20 @@ static int ipw_config(struct ipw_priv *priv)
/* set basic system config settings */
init_sys_config(&priv->sys_config);
/* Support Bluetooth if we have BT h/w on board, and user wants to.
* Does not support BT priority yet (don't abort or defer our Tx) */
if (bt_coexist) {
unsigned char bt_caps = priv->eeprom[EEPROM_SKU_CAPABILITY];
if (bt_caps & EEPROM_SKU_CAP_BT_CHANNEL_SIG)
priv->sys_config.bt_coexistence
|= CFG_BT_COEXISTENCE_SIGNAL_CHNL;
if (bt_caps & EEPROM_SKU_CAP_BT_OOB)
priv->sys_config.bt_coexistence
|= CFG_BT_COEXISTENCE_OOB;
}
if (priv->ieee->iw_mode == IW_MODE_ADHOC)
priv->sys_config.answer_broadcast_ssid_probe = 1;
else
......@@ -11351,6 +11366,9 @@ module_param(mode, int, 0444);
MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS)");
#endif
module_param(bt_coexist, int, 0444);
MODULE_PARM_DESC(bt_coexist, "enable bluetooth coexistence (default off)");
module_param(hwcrypto, int, 0444);
MODULE_PARM_DESC(hwcrypto, "enable hardware crypto (default on)");
......
......@@ -1566,13 +1566,18 @@ do { if (ipw_debug_level & (level)) \
#define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */
#define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */
/* NIC type as found in the one byte EEPROM_NIC_TYPE offset*/
/* NIC type as found in the one byte EEPROM_NIC_TYPE offset */
#define EEPROM_NIC_TYPE_0 0
#define EEPROM_NIC_TYPE_1 1
#define EEPROM_NIC_TYPE_2 2
#define EEPROM_NIC_TYPE_3 3
#define EEPROM_NIC_TYPE_4 4
/* Bluetooth Coexistence capabilities as found in EEPROM_SKU_CAPABILITY */
#define EEPROM_SKU_CAP_BT_CHANNEL_SIG 0x01 /* we can tell BT our channel # */
#define EEPROM_SKU_CAP_BT_PRIORITY 0x02 /* BT can take priority over us */
#define EEPROM_SKU_CAP_BT_OOB 0x04 /* we can signal BT out-of-band */
#define FW_MEM_REG_LOWER_BOUND 0x00300000
#define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40)
#define IPW_EVENT_REG (FW_MEM_REG_LOWER_BOUND + 0x04)
......@@ -1869,21 +1874,23 @@ struct ipw_cmd_log {
struct host_cmd cmd;
};
#define CFG_BT_COEXISTENCE_MIN 0x00
#define CFG_BT_COEXISTENCE_DEFER 0x02
#define CFG_BT_COEXISTENCE_KILL 0x04
#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08
#define CFG_BT_COEXISTENCE_OOB 0x10
#define CFG_BT_COEXISTENCE_MAX 0xFF
#define CFG_BT_COEXISTENCE_DEF 0x80 /* read Bt from EEPROM */
#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x0
#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x1
/* SysConfig command parameters ... */
/* bt_coexistence param */
#define CFG_BT_COEXISTENCE_SIGNAL_CHNL 0x01 /* tell BT our chnl # */
#define CFG_BT_COEXISTENCE_DEFER 0x02 /* defer our Tx if BT traffic */
#define CFG_BT_COEXISTENCE_KILL 0x04 /* kill our Tx if BT traffic */
#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 /* multimedia extensions */
#define CFG_BT_COEXISTENCE_OOB 0x10 /* signal BT via out-of-band */
/* clear-to-send to self param */
#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x00
#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x01
#define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN
#define CFG_SYS_ANTENNA_BOTH 0x000
#define CFG_SYS_ANTENNA_A 0x001
#define CFG_SYS_ANTENNA_B 0x003
/* Antenna diversity param (h/w can select best antenna, based on signal) */
#define CFG_SYS_ANTENNA_BOTH 0x00 /* NIC selects best antenna */
#define CFG_SYS_ANTENNA_A 0x01 /* force antenna A */
#define CFG_SYS_ANTENNA_B 0x03 /* force antenna B */
/*
* The definitions below were lifted off the ipw2100 driver, which only
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment