Commit 51a0d036 authored by Johan Hovold's avatar Johan Hovold Committed by Linus Torvalds

ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown

Make sure RTC-interrupts are disabled at shutdown.

As the RTC is generally powered by backup power (VDDBU), its interrupts
are not disabled on wake-up, user, watchdog or software reset.  This
could cause troubles on other systems (e.g.  older kernels) if an
interrupt occurs before a handler has been installed at next boot.

Let us be well-behaved and disable them on clean shutdowns at least (as
do the RTT-based rtc-at91sam9 driver).
Signed-off-by: default avatarJohan Hovold <jhovold@gmail.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 27c73ae7
......@@ -428,6 +428,14 @@ static int __exit at91_rtc_remove(struct platform_device *pdev)
return 0;
}
static void at91_rtc_shutdown(struct platform_device *pdev)
{
/* Disable all interrupts */
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
}
#ifdef CONFIG_PM_SLEEP
/* AT91RM9200 RTC Power management control */
......@@ -466,6 +474,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
static struct platform_driver at91_rtc_driver = {
.remove = __exit_p(at91_rtc_remove),
.shutdown = at91_rtc_shutdown,
.driver = {
.name = "at91_rtc",
.owner = THIS_MODULE,
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment