Commit 4ee1f6b5 authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Nicolas Pitre

ARM: Remove dependency of plat-orion time code on mach directory includes.

This patch makes the various mach dirs that use the plat-orion time
code pass in timer and bridge addresses explicitly, instead of having
plat-orion get those values by including a mach dir include file --
the latter mechanism is problematic if you want to support multiple
ARM platforms in the same kernel image.
Signed-off-by: default avatarLennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: default avatarNicolas Pitre <nico@fluxnic.net>
parent 40ff15a6
......@@ -90,6 +90,7 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
.boot_params = 0x00000100,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
MACHINE_END
......@@ -532,6 +532,11 @@ void __init dove_i2c_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
void __init dove_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
}
static int get_tclk(void)
{
/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
......@@ -540,7 +545,8 @@ static int get_tclk(void)
static void dove_timer_init(void)
{
orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_DOVE_BRIDGE, get_tclk());
}
struct sys_timer dove_timer = {
......
......@@ -22,6 +22,7 @@ extern struct mbus_dram_target_info dove_mbus_dram_info;
*/
void dove_map_io(void);
void dove_init(void);
void dove_init_early(void);
void dove_init_irq(void);
void dove_setup_cpu_mbus(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
......
......@@ -97,6 +97,7 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.boot_params = 0x00000100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
MACHINE_END
......@@ -26,10 +26,6 @@
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
......
......@@ -847,6 +847,11 @@ static void __init kirkwood_wdt_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
}
int kirkwood_tclk;
static int __init kirkwood_find_tclk(void)
......@@ -865,7 +870,9 @@ static int __init kirkwood_find_tclk(void)
static void __init kirkwood_timer_init(void)
{
kirkwood_tclk = kirkwood_find_tclk();
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
struct sys_timer kirkwood_timer = {
......
......@@ -27,6 +27,7 @@ struct kirkwood_asoc_platform_data;
*/
void kirkwood_map_io(void);
void kirkwood_init(void);
void kirkwood_init_early(void);
void kirkwood_init_irq(void);
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
......
......@@ -224,6 +224,7 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.boot_params = 0x00000100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -100,6 +100,7 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
.boot_params = 0x00000100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -105,6 +105,7 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
.boot_params = 0x00000100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -124,6 +124,7 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
.boot_params = 0x00000100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -29,9 +29,6 @@
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
......
......@@ -166,6 +166,7 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
.boot_params = 0x00000100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -261,6 +261,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -271,6 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -281,6 +283,7 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......
......@@ -402,6 +402,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.boot_params = 0x00000100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -412,6 +413,7 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.boot_params = 0x00000100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......
......@@ -217,6 +217,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -228,6 +229,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -239,6 +241,7 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
.boot_params = 0x00000100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......
......@@ -82,6 +82,7 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
.boot_params = 0x00000100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -118,6 +118,7 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
.boot_params = 0x00000100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -134,6 +134,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
.boot_params = 0x00000100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -144,6 +145,7 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
.boot_params = 0x00000100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......
......@@ -204,6 +204,7 @@ MACHINE_START(T5325, "HP t5325 Thin Client")
.boot_params = 0x00000100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -135,6 +135,7 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219")
.boot_params = 0x00000100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -179,6 +179,7 @@ MACHINE_START(TS41X, "QNAP TS-41x")
.boot_params = 0x00000100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
......@@ -18,6 +18,7 @@
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/loki.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
......@@ -290,9 +291,15 @@ void __init loki_uart1_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
void __init loki_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
}
static void loki_timer_init(void)
{
orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_LOKI_BRIDGE, LOKI_TCLK);
}
struct sys_timer loki_timer = {
......
......@@ -18,6 +18,7 @@ struct mv643xx_eth_platform_data;
*/
void loki_map_io(void);
void loki_init(void);
void loki_init_early(void);
void loki_init_irq(void);
extern struct mbus_dram_target_info loki_mbus_dram_info;
......
......@@ -17,11 +17,6 @@
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR 0x0004
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
......
......@@ -93,6 +93,7 @@ MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
.boot_params = 0x00000100,
.init_machine = lb88rc8480_init,
.map_io = loki_map_io,
.init_early = loki_init_early,
.init_irq = loki_init_irq,
.timer = &loki_timer,
MACHINE_END
......@@ -148,6 +148,7 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
.boot_params = 0x00000100,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
MACHINE_END
......@@ -818,9 +818,15 @@ void __init mv78xx0_uart3_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
void __init mv78xx0_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
}
static void mv78xx0_timer_init(void)
{
orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_MV78XX0_TIMER_1, get_tclk());
}
struct sys_timer mv78xx0_timer = {
......
......@@ -20,6 +20,7 @@ struct mv_sata_platform_data;
int mv78xx0_core_index(void);
void mv78xx0_map_io(void);
void mv78xx0_init(void);
void mv78xx0_init_early(void);
void mv78xx0_init_irq(void);
extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
......
......@@ -96,6 +96,7 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
.boot_params = 0x00000100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
MACHINE_END
......@@ -20,10 +20,6 @@
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
......
......@@ -81,6 +81,7 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
.boot_params = 0x00000100,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
MACHINE_END
......@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/ehci-orion.h>
......@@ -599,6 +600,11 @@ void __init orion5x_wdt_init(void)
/*****************************************************************************
* Time handling
****************************************************************************/
void __init orion5x_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
}
int orion5x_tclk;
int __init orion5x_find_tclk(void)
......@@ -616,7 +622,9 @@ int __init orion5x_find_tclk(void)
static void orion5x_timer_init(void)
{
orion5x_tclk = orion5x_find_tclk();
orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk);
orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
IRQ_ORION5X_BRIDGE, orion5x_tclk);
}
struct sys_timer orion5x_timer = {
......
......@@ -9,6 +9,7 @@ struct mv_sata_platform_data;
* Basic Orion init functions used early by machine-setup.
*/
void orion5x_map_io(void);
void orion5x_init_early(void);
void orion5x_init_irq(void);
void orion5x_init(void);
extern int orion5x_tclk;
......
......@@ -339,6 +339,7 @@ MACHINE_START(D2NET, "LaCie d2 Network")
.boot_params = 0x00000100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......@@ -350,6 +351,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network")
.boot_params = 0x00000100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -361,6 +361,7 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
.boot_params = 0x00000100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
MACHINE_END
......@@ -733,6 +733,7 @@ MACHINE_START(DNS323, "D-Link DNS-323")
.boot_params = 0x00000100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -254,6 +254,7 @@ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
.boot_params = 0x00000100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -22,14 +22,12 @@
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
#define WDT_INT_REQ 0x0008
#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
......
......@@ -382,6 +382,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
.boot_params = 0x00000100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......@@ -394,6 +395,7 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
.boot_params = 0x00000100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -321,6 +321,7 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
.boot_params = 0x00000100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -268,6 +268,7 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
.boot_params = 0x00000100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -270,6 +270,7 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
.boot_params = 0x00000100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -264,6 +264,7 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II")
.boot_params = 0x00000100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32
......
......@@ -232,6 +232,7 @@ MACHINE_START(MV2120, "HP Media Vault mv2120")
.boot_params = 0x00000100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32
......
......@@ -422,6 +422,7 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
.boot_params = 0x00000100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -172,6 +172,7 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
.boot_params = 0x00000100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -184,6 +184,7 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
.boot_params = 0x00000100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
......
......@@ -308,6 +308,7 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
.boot_params = 0x00000100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
MACHINE_END
......@@ -126,6 +126,7 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
.boot_params = 0x00000100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,