Commit 449bd54d authored by Roel Kluin's avatar Roel Kluin Committed by Mark Brown
Browse files

ASoC: correct print specifiers for unsigneds



Unsigned variables should use `%u' rather than `%d'.
Signed-off-by: default avatarRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent ea8b27ad
......@@ -117,7 +117,7 @@ static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
* Find actual rate, compare to requested rate
*/
actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
rate, actual_rate);
......
......@@ -86,7 +86,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
*/
if ((reg < 0 || reg > 9) && (reg != 15)) {
printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg);
printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
return -1;
}
......@@ -98,7 +98,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg,
if (codec->hw_write(codec->control_data, data, 2) == 2)
return 0;
printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__,
printk(KERN_ERR "%s cannot write %03x to register R%u\n", __func__,
value, reg);
return -EIO;
......
......@@ -101,7 +101,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg,
pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
if (reg >= UDA134X_REGS_NUM) {
printk(KERN_ERR "%s unkown register: reg: %d",
printk(KERN_ERR "%s unkown register: reg: %u",
__func__, reg);
return -EINVAL;
}
......@@ -296,7 +296,7 @@ static int uda134x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
struct snd_soc_codec *codec = codec_dai->codec;
struct uda134x_priv *uda134x = codec->private_data;
pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__,
pr_debug("%s clk_id: %d, freq: %u, dir: %d\n", __func__,
clk_id, freq, dir);
/* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable
......
......@@ -1108,7 +1108,7 @@ static int wm8350_set_fll(struct snd_soc_dai *codec_dai,
if (ret < 0)
return ret;
dev_dbg(wm8350->dev,
"FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d",
"FLL in %u FLL out %u N 0x%x K 0x%x div %d ratio %d",
freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div,
fll_div.ratio);
......
......@@ -954,7 +954,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
factors->outdiv *= 2;
if (factors->outdiv > 32) {
dev_err(wm8400->wm8400->dev,
"Unsupported FLL output frequency %dHz\n",
"Unsupported FLL output frequency %uHz\n",
Fout);
return -EINVAL;
}
......@@ -1003,7 +1003,7 @@ static int fll_factors(struct wm8400_priv *wm8400, struct fll_factors *factors,
factors->k = K / 10;
dev_dbg(wm8400->wm8400->dev,
"FLL: Fref=%d Fout=%d N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
"FLL: Fref=%u Fout=%u N=%x K=%x, FRATIO=%x OUTDIV=%x\n",
Fref, Fout,
factors->n, factors->k, factors->fratio, factors->outdiv);
......
......@@ -298,7 +298,7 @@ static void pll_factors(unsigned int target, unsigned int source)
if ((Ndiv < 6) || (Ndiv > 12))
printk(KERN_WARNING
"WM8510 N value %d outwith recommended range!d\n",
"WM8510 N value %u outwith recommended range!d\n",
Ndiv);
pll_div.n = Ndiv;
......
......@@ -415,7 +415,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
unsigned int K, Ndiv, Nmod;
int i;
pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
/* Scale the output frequency up; the PLL should run in the
* region of 90-100MHz.
......@@ -447,7 +447,7 @@ static int pll_factors(struct _pll_div *pll_div, unsigned int target,
if ((Ndiv < 5) || (Ndiv > 13)) {
printk(KERN_ERR
"WM8580 N=%d outside supported range\n", Ndiv);
"WM8580 N=%u outside supported range\n", Ndiv);
return -EINVAL;
}
......
......@@ -703,7 +703,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
if ((Ndiv < 6) || (Ndiv > 12))
printk(KERN_WARNING
"wm8753: unsupported N = %d\n", Ndiv);
"wm8753: unsupported N = %u\n", Ndiv);
pll_div->n = Ndiv;
Nmod = target % source;
......
......@@ -778,11 +778,11 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
}
if (target > 100000000)
printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d"
" Fout=%d\n", target, Fref, Fout);
printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u"
" Fout=%u\n", target, Fref, Fout);
if (div > 32) {
printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
"Fref=%d, Fout=%d, target=%d\n",
"Fref=%u, Fout=%u, target=%u\n",
div, Fref, Fout, target);
return -EINVAL;
}
......
......@@ -998,7 +998,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int target,
if ((Ndiv < 6) || (Ndiv > 12))
printk(KERN_WARNING
"WM8990 N value outwith recommended range! N = %d\n", Ndiv);
"WM8990 N value outwith recommended range! N = %u\n", Ndiv);
pll_div->n = Ndiv;
Nmod = target % source;
......
......@@ -710,7 +710,7 @@ static void pll_factors(struct _pll_div *pll_div, unsigned int source)
Ndiv = target / source;
if ((Ndiv < 5) || (Ndiv > 12))
printk(KERN_WARNING
"WM9713 PLL N value %d out of recommended range!\n",
"WM9713 PLL N value %u out of recommended range!\n",
Ndiv);
pll_div->n = Ndiv;
......
......@@ -208,7 +208,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
dev_dbg(&ssp->pdev->dev,
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
cpu_dai->id, clk_id, freq);
switch (clk_id) {
......@@ -357,7 +357,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
ssacd |= (0x6 << 4);
dev_dbg(&ssp->pdev->dev,
"Using SSACDD %x to supply %dHz\n",
"Using SSACDD %x to supply %uHz\n",
val, freq_out);
break;
}
......
......@@ -547,7 +547,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
actual = clkrate / (fsdiv * div);
deviation = actual - rate;
printk(KERN_DEBUG "%dfs: div %d => result %d, deviation %d\n",
printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
fsdiv, div, actual, deviation);
deviation = abs(deviation);
......@@ -563,7 +563,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
break;
}
printk(KERN_DEBUG "best: fs=%d, div=%d, rate=%d\n",
printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
best_fs, best_div, best_rate);
info->fs_div = best_fs;
......
......@@ -145,7 +145,7 @@ static int ssi_hw_params(struct snd_pcm_substream *substream,
recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
pr_debug("bits: %d channels: %d\n", bits, channels);
pr_debug("bits: %u channels: %u\n", bits, channels);
ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
CR_SWL_MASK);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment