Commit 3c937993 authored by Patrice Chotard's avatar Patrice Chotard Committed by Linus Walleij

pinctrl/abx500: add AB8500 sub-driver

This adds a subdriver for the AB8500 pinctrl portions.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Acked-by: default avatarOlof Johansson <>
Reviewed-by: default avatarStephen Warren <>
Signed-off-by: default avatarPatrice Chotard <>
Signed-off-by: Linus Walleij's avatarLinus Walleij <>
parent 0493e649
......@@ -20,6 +20,7 @@ config UX500_SOC_DB8500
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select PINCTRL_DB8540
select PINCTRL_AB8500
......@@ -33,6 +33,10 @@ config PINCTRL_ABX500
Select this to enable the ABx500 family IC GPIO driver
config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
......@@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL) += devicetree.o
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
This diff is collapsed.
......@@ -1116,6 +1116,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
/* Poke in other ASIC variants here */
switch (platid->driver_data) {
case PINCTRL_AB8500:
dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
(int) platid->driver_data);
......@@ -177,4 +177,17 @@ struct abx500_pinctrl_soc_data {
int irq_gpio_factor;
void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
static inline void
abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif /* PINCTRL_PINCTRL_ABx500_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment